Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Emblempros
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Member Car Journals


Reply
 
Thread Tools
Old 07-04-2018, 03:00 PM   #1
Charmaro_ZL1
 
Drives: 2013 Chevrolet Camaro ZL1
Join Date: Jul 2018
Location: North Texas
Posts: 6
Charmaro_ZL1's Build

Hi everyone!

I picked up my Victory Red 2013 ZL1 on 06/13/18

The car has a few mods on it already and is tuned to 562whp. It has Texas speed catted longtubes headers, Cold Air Inductions Intake, Lingenfelter 2.38 upper pulley.

This car is a daily and AutoX car until I find a little pickup to drive around daily so I can full race car the ZL1.

Current build list: Installed/Purchased/Planned
Texas Speed Longtubes
2.38 upper pulley
PFADT sway bars
PFADT street/track coilovers
BMSPEC front splitter
19x10.5 Konig Ultraform 21lbs each
305/35-19 square setup tires
Cold air Inductions intake

PFADT bushings
BMSPEC GT Rear Wing
Vengeance racing tune

Some current photos soon!

Also I'll update this with every new discovery, part, race etc.
Attached Images
     

Last edited by Charmaro_ZL1; 08-23-2018 at 07:46 PM.
Charmaro_ZL1 is offline   Reply With Quote
Old 07-05-2018, 02:53 AM   #2
PowerCreep
 
Drives: 2013 Black 1LT RS
Join Date: Jun 2017
Location: Little Rock, AR
Posts: 60
Nice!
PowerCreep is offline   Reply With Quote
Old 07-06-2018, 07:41 AM   #3
Charmaro_ZL1
 
Drives: 2013 Chevrolet Camaro ZL1
Join Date: Jul 2018
Location: North Texas
Posts: 6
PFADT coilovers are supposed to be here on Wednesday of next week. I should be able to put them on the day I get them or the following day.

First AutoX is the 15th of this month and then the following week on the 21st.

Next up is some good wheels and tires. I'm looking for a good light 19x11 setup, anyone know how much the MRR wheels weigh?

Been thinking about picking up the Konig Ultraform wheels, 19x10.5 only weighs 21lbs. But not sure how they would look on the ZL1. Any suggestions welcome!
Charmaro_ZL1 is offline   Reply With Quote
Old 07-07-2018, 06:08 PM   #4
Charmaro_ZL1
 
Drives: 2013 Chevrolet Camaro ZL1
Join Date: Jul 2018
Location: North Texas
Posts: 6
Just purchased the 19x10.5 Konig Ultraform wheels in graphite, and 305/30-19 Bridgestone RE71r.

The setup should be much lighter than the stock setup, and I'll get to work on it next weekend when I get to the autocross course.

I updated the Original post, I'll post before and after pics of the coilovers and wheels and tires.
Charmaro_ZL1 is offline   Reply With Quote
Old 08-23-2018, 07:40 PM   #5
Charmaro_ZL1
 
Drives: 2013 Chevrolet Camaro ZL1
Join Date: Jul 2018
Location: North Texas
Posts: 6
An update to the car! Sorry I have been out lately work and school and racing have me tied up quite a bit but here is the car now with the new list of mods:

I changed from the APR front splitter to the BMSPEC front splitter due to the significant boost of aero it provides, I also ordered BMSPECs Carbon GT wing that should be showing up in a week or two. I have the Sway bars Installed as well. And finally the suspension is tuned up pretty well. Now I am just tuning it with the sway bars to get that perfect nuetral with a little Oversteer bias. But we will see how it works. Here are some photos, and I'll update the first post to reflect the changes.
Attached Images
    
Charmaro_ZL1 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:18 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.