01-30-2012, 08:39 PM | #1 |
Drives: 2010 Camaro 2SS Aqua Metallic Blue Join Date: Jun 2010
Location: socal
Posts: 167
|
Hotchkis problems :(
hey guys, i installed front and rear hotchkis sway bars about a week ago. about 3 to 4 days ago they started making like a squeaking noise every time i would hit a bump or something on the road. its pretty annoying. i called the shop that installed them for me and they said that it was normal for aftermarket sways to do that and that the guys there did torque everything to the right numbers. the shop is really reputable too. any suggestions from you guys that could help me fix this problem?
also, the front is the only one that seems to be making noise, the back is completely fine. thanks in advance!
__________________
|
01-30-2012, 09:00 PM | #2 |
|
It's not normal for sways to be making noises. Maybe the end links are binding or hitting the spring. Get a flashlight and see if you see any rub marks.
Send a pm to Mike @ hotchkis and see if they can take care of it if you are local. |
01-30-2012, 09:04 PM | #3 |
Drives: 2010 Camaro 2SS Aqua Metallic Blue Join Date: Jun 2010
Location: socal
Posts: 167
|
okay, will do. thanks!
__________________
|
01-30-2012, 11:28 PM | #4 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Squeaking is a caused by a dry sway bar D bush. Take your car back to the shop and have them re-grease the inner portion of the front sway bar d bushes.
|
01-31-2012, 08:49 AM | #5 |
Drives: 2011 Mustang RTR Join Date: Jan 2012
Location: Redondo Beach Ca
Posts: 146
|
Thank you Justicepete for the reply. I would do exactly as he said and take it back to the shop that did the install and have them properly grease the bushing. If the squeeking is still present give me a call.
|
01-31-2012, 07:50 PM | #6 |
Drives: 2010 Camaro 2SS Aqua Metallic Blue Join Date: Jun 2010
Location: socal
Posts: 167
|
i went to the shop today and they re-greased everything and its still squeaking. they did do an alignment on the car after they put on the front sway bar, if that makes a difference?
__________________
|
01-31-2012, 08:14 PM | #7 |
|
PM Mike. Are you close to Hotchkis?
|
01-31-2012, 08:54 PM | #8 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
That doesn't sound right All you had done were sway bars, correct? Please get with Michael.
|
01-31-2012, 08:56 PM | #9 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
01-31-2012, 09:23 PM | #10 |
Drives: 2010 Camaro 2SS Aqua Metallic Blue Join Date: Jun 2010
Location: socal
Posts: 167
|
he said he only had to do it cause he took off my wheel and something else. and yes ive spoken to michael before and im pretty close. and ill PM him now >.<
__________________
|
01-31-2012, 09:30 PM | #11 |
Drives: 2010 Camaro 2SS Aqua Metallic Blue Join Date: Jun 2010
Location: socal
Posts: 167
|
and do you guys just think its the sways themselves? ive been going to this shop for a while and i know they can easily do a simple sway bar installation. so im not sure what the real problem is :(
__________________
|
01-31-2012, 09:34 PM | #12 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
The odds against the sway bar being bad and causing a squeak are about 1,000,000 to 1. It is a powder coated steel tube. What could go wrong with it For some reason, the bush is dry and squeaking. Michael will help you sort it out.
|
01-31-2012, 09:51 PM | #13 |
Drives: 2010 Camaro 2SS Aqua Metallic Blue Join Date: Jun 2010
Location: socal
Posts: 167
|
okay cool! and how could the bushing be dry i saw him lube it? maybe it didnt get all around the bushing? and i think i read somewhere that it could also be the endlinks?
sorry for all the questions
__________________
|
01-31-2012, 10:22 PM | #14 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
My guess is there is a dry spot or two. It could be some debris got in there.
|
|
|
Tags |
hotchkis, noise, squeaking, sway bars, thumping |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1st and 2nd gear problems. 1SS 6M | jnm2003 | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 7 | 10-29-2019 12:22 PM |
Hotchkis Strut Tower Brace for Magnacharger Available at MTI Racing | MTI Racing Kevin | Suspension / Chassis / Brakes | 0 | 01-27-2011 11:33 AM |
2010 Camaro Race Pack by Hotchkis | Xplosive Performance | Suspension / Chassis / Brakes | 1 | 12-09-2010 11:03 AM |
Problems from cutouts | LS3_Man | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 8 | 06-05-2010 02:57 PM |
The wait for Hotchkis Springs is over! | Hotchkis | Suspension / Chassis / Brakes | 10 | 02-06-2010 09:31 PM |