08-24-2014, 05:06 PM | #15 |
Drives: 2014 ZL1 M6 Join Date: Jul 2014
Location: Virginia
Posts: 493
|
Was worried about that.
Just take the car for a 10 or 15 min drive and the engine bay heat helps loosen it. One question, if anyone has a service manual handy, what is the torque spec for the 8 fasteners? Thanks Tony
__________________
2014 ZL1 M6
Bone stock, for now! 2001 Z28 M6 !cags, !air, FTP 85mm Lid, Z06 85mm MAF, P&P TB !4x4, Strano Springs, Strano Sways, Koni 4/4s, Watts Link ARH LTs, ARH catted Y, SLP catback with Dual/Dual Muffler, SLP CME and Valance OE Wheels Machined Face C5 DDs, 18x10.5s, with 295/35-18s on all 4 corners! 352rwhp and 366rwtq |
08-25-2014, 04:42 PM | #16 |
Drives: 2013 Camaro ZL1 Join Date: May 2013
Location: WA
Posts: 104
|
fyi on the fasteners .... they have a thin film of rubber on the seating face and it tears off easily.
|
08-25-2014, 08:48 PM | #17 |
Drives: 2014 ZL1 M6 Join Date: Jul 2014
Location: Virginia
Posts: 493
|
Yes they do and yes it does.
Tony
__________________
2014 ZL1 M6
Bone stock, for now! 2001 Z28 M6 !cags, !air, FTP 85mm Lid, Z06 85mm MAF, P&P TB !4x4, Strano Springs, Strano Sways, Koni 4/4s, Watts Link ARH LTs, ARH catted Y, SLP catback with Dual/Dual Muffler, SLP CME and Valance OE Wheels Machined Face C5 DDs, 18x10.5s, with 295/35-18s on all 4 corners! 352rwhp and 366rwtq |
|
|
|
|