01-08-2016, 11:20 AM | #1 |
Drives: SS Join Date: Mar 2013
Location: USA
Posts: 221
|
PCM X1 Pins 19 & 43
Anyone know what Pins 19 and 43 are for? Both are designated as 'Ignition Voltage'. Can either (or both) of these be used as a 12V switched source?
|
01-10-2016, 12:06 AM | #2 |
BUMBL Z
|
There's an ignition fuse in the underhood fuse block, fuse #15 i believe. I'd grab an add-a-fuse from an autozone and tap that if you need an underhood 12v source rather than splice your PCM's harness.
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
|
|
|
|