[PHOTOS]PROVEN WICKED'S "PROVEN1" SEMA CAR - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Proven Wicked · 11-19-2010, 02:05 AM

Thanks for all the great comments guys. We are going to be pretty busy until after PRI and then I will try and get some videos put together especially once we get some more track time. We only had a month to build it after work hours so we haven't had a lot of time to run it...yet.

RE: Pedal Covers
The pedal covers are by Drake Muscle Cars, but I'm not sure they are available for sale yet.

RE: Centerlock hub adapters
The centerlock hub adapters are our design and are available on a special order basis. They start out as a 52 lb of billet 4140 HT material and are machined down to a 4.8 lb hub adapter. We replace the studs with countersunk drive pins and top it off with a 7075-T6 Aluminum billet nut and has a plunger system built in the center of the adapter to with pins that snap into the perimeter cage to prevent them from spinning off. They are right hand and left hand thread specific to prevent loosening when the wheel is spinning. We worked with HRE to come up with a wheel design to accomodate. Pictures are on our facebook page.

Camaro68 · 11-19-2010, 02:09 AM

Quote:

Originally Posted by 2010 SSRS

Absolute Bad Azz Camaro, wow.

Proven Wicked · 11-19-2010, 02:27 AM

Quote:

Originally Posted by PonyCrusher

What version of APR's wing is that?

The APR wing is one of only a couple prototypes that they did for the SEMA show. It should be available soon and we will be offering it. We'll let you know when it's ready. It's truly a piece of art and top notch quality.

ethergeist · 11-19-2010, 02:50 PM

awesome car!

PfadtRacing · 11-19-2010, 05:49 PM

Great work Shane! Be sure to keep up with us on where this build goes!

Outlaw77 · 11-19-2010, 06:44 PM

looks good but who drives this and where?

Proven Wicked · 12-01-2010, 03:30 AM

It's used as a test mule for our products and as a marketing tool. Most the driving is done by the owner of Proven Wicked, Shane Wagner. Nothing sanctioned at this time, just at road race and autocross events to come in between shows. It will be at PRI and then C5 Fest for upcoming shows and local SCCA AutoX events and track days at Spring Mountain in between.

klatterblast · 12-01-2010, 07:04 AM

thats looking good

FitmentFactory · 12-02-2010, 12:32 PM

Sweet!!!

Apex Motorsports · 12-02-2010, 01:39 PM

A month later I spot this thread! We saw your car at the Seibon booth, it was sick. Good job.

Gnarlygianni · 12-03-2010, 11:44 PM

Two questions ! One what hood is that ! and Two if that hood is purchasable how is the water drainage.. I would like to purchase that hood ASAP !

Proven Wicked · 12-06-2010, 03:33 AM

Quote:

Originally Posted by Gnarlygianni

Two questions ! One what hood is that ! and Two if that hood is purchasable how is the water drainage.. I would like to purchase that hood ASAP !

That is Seibon's BBII style hood available through them. The drainage is the compromise for the excellent heat extraction. I just put towels under the hood when I wash it and drive fast enough in the rain

Camaro_hx · 12-06-2010, 05:18 AM

TOO BUFF! LOVIN' IT!

PonyCrusher · 12-07-2010, 05:58 PM

Quote:

Originally Posted by Proven Wicked

The APR wing is one of only a couple prototypes that they did for the SEMA show. It should be available soon and we will be offering it. We'll let you know when it's ready. It's truly a piece of art and top notch quality.

I cant wait I already have the front splitter and it just looks a little naked without a more aggressive race style rear wing. Do they make make any different base mounts for that wing application so it doesnt stick up that high?

12-01-2010, 07:04 AM	#36
klatterblast Drives: 2010 camaro 2ssrs blk. Join Date: Oct 2009 Location: walker la. Posts: 1,732 View My Garage	thats looking good __________________ 2010 Hennessey HPE650 2SSRS Blk/Blk Magnuson TVS2300,ported heads,cam,Hotchkis suspension. Weld 17”s, Mickey Thompson’s.

12-03-2010, 11:44 PM	#39
Gnarlygianni Drives: Black Camaro 2SS Join Date: Nov 2009 Location: Tucson, Az Posts: 365	Two questions ! One what hood is that ! and Two if that hood is purchasable how is the water drainage.. I would like to purchase that hood ASAP ! __________________ 2010 Black Camaro SS: Cold Air Inductions Intake, Magnaflow Comp. Series Cat-Back, StainlessWorks Long Tube Headers and High Flow Cats, running on a DiabloSport 91 Octane Tune.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Washing/Detailing for Newbies	MRK III Z28	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	125	02-05-2024 09:55 PM
Pedders Camaro was the fastest Camaro at the Optima Challenge!	Info@PeddersUSA.com	Suspension / Brakes / Chassis	118	12-02-2009 11:06 PM
1st Car Show and meeting Al Oppenheiser!	scrming	5th Gen Camaro SS LS LT General Discussions	44	08-17-2009 04:46 PM
#4768 - Delivered and Made Ready the Right Way!	Number_9	5th Gen Camaro SS LS LT General Discussions	62	07-16-2009 02:42 AM
What makes a car a "tuner" car?	Dentyneice	General Automotive + Other Cars Discussion	8	05-11-2009 10:19 PM

11-19-2010, 02:05 AM	#29
Proven Wicked Drives: 2010 Camaro 2SS/RS Join Date: Jan 2010 Location: Bismarck, ND Posts: 77	Thanks for all the great comments guys. We are going to be pretty busy until after PRI and then I will try and get some videos put together especially once we get some more track time. We only had a month to build it after work hours so we haven't had a lot of time to run it...yet. RE: Pedal Covers The pedal covers are by Drake Muscle Cars, but I'm not sure they are available for sale yet. RE: Centerlock hub adapters The centerlock hub adapters are our design and are available on a special order basis. They start out as a 52 lb of billet 4140 HT material and are machined down to a 4.8 lb hub adapter. We replace the studs with countersunk drive pins and top it off with a 7075-T6 Aluminum billet nut and has a plunger system built in the center of the adapter to with pins that snap into the perimeter cage to prevent them from spinning off. They are right hand and left hand thread specific to prevent loosening when the wheel is spinning. We worked with HRE to come up with a wheel design to accomodate. Pictures are on our facebook page.

11-19-2010, 02:50 PM	#32
ethergeist Drives: 2010 camaro Join Date: Nov 2010 Location: quakertown, pa Posts: 2	awesome car!

11-19-2010, 05:49 PM	#33
PfadtRacing Drives: 2010 Camaro, 2006 Z06 Join Date: Feb 2009 Location: SLC, UT Posts: 3,370	Great work Shane! Be sure to keep up with us on where this build goes!

11-19-2010, 06:44 PM	#34
Outlaw77 Drives: 2018 Charger SRT 392 F8 Green Join Date: Aug 2010 Location: Oakville Ontario, Canada Posts: 1,910	looks good but who drives this and where?

12-01-2010, 03:30 AM	#35
Proven Wicked Drives: 2010 Camaro 2SS/RS Join Date: Jan 2010 Location: Bismarck, ND Posts: 77	It's used as a test mule for our products and as a marketing tool. Most the driving is done by the owner of Proven Wicked, Shane Wagner. Nothing sanctioned at this time, just at road race and autocross events to come in between shows. It will be at PRI and then C5 Fest for upcoming shows and local SCCA AutoX events and track days at Spring Mountain in between.

12-02-2010, 12:32 PM	#37
FitmentFactory Drives: Camaro SS Join Date: Dec 2010 Location: FL Posts: 21	Sweet!!!

12-02-2010, 01:39 PM	#38
Apex Motorsports Drives: 2000 Camaro SS Join Date: Feb 2010 Location: Louisville, Ky. Posts: 25,179	A month later I spot this thread! We saw your car at the Seibon booth, it was sick. Good job.

12-06-2010, 05:18 AM	#41
Camaro_hx Account Suspended Drives: 2010 1LT/RS CGM Join Date: Sep 2009 Location: KWT Posts: 2,474 View My Garage	TOO BUFF! LOVIN' IT!