01-28-2014, 05:07 PM | #6595 |
Drives: 69 Camaro and 92 RS Join Date: Feb 2013
Location: Iowa
Posts: 180
|
hey lahmannSS, I saw you guys there. I was there in my Purple/green chamelion 69 camaro. Good job on the 13.1. I only managed a 15.6 but thats my new best with that car.It's a work in progress. I introduced myself to Jason cause i recognized his car from here. Hope to see you around.
__________________
There are 3 ways to do any project. Good, fast, and cheap. You can only choose two.
If it's done good and fast, it isn't going to be cheap. If it's done good and cheap, it isn't going to be done fast. If it's done cheap and fast, it isn't going to be good. |
01-28-2014, 07:53 PM | #6596 |
Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011
Location: Cedar Falls, Iowa
Posts: 1,581
|
Welcome to Camaro5 Brady!
__________________
2013 Camaro 1SS/RS - Ashen Gray Metallic
| LS3 | CAI Inductions, Inc Intake | Vmax Ported Throttle Body | Dynatech 1.875" Long Tube Headers | Apex Scoop & Washer Bottle Relocation | Lethal Racing Night Fury Cam | BTR 7.400" Push Rods |LS2 Dampener | Melling 10296 Oil Pump | IWIS Chain | BTR .660" Dual Valve Springs | BTR Trunion Upgrade Kit | Lethal Racing Tuned | Anvil Notch Spoiler | BMR Split Drop Springs | Eaton TrueTrac | GM 3.91 Gears | LPW Diff Cover | Rohana RF2 275/40 20x10F 315/35 20x11R | BMR Polyurethane Motor Mounts |
01-28-2014, 09:02 PM | #6597 |
|
Welcome lahmann
__________________
2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan,
Holley fuel rail, Proform valve covers, relocated coil packs |
01-28-2014, 09:46 PM | #6598 |
Drives: Boyfriend has 2013 2SS/RS Camaro Join Date: Aug 2011
Location: Des Moines
Posts: 44
|
GET TOGETHER IN DES MOINES
Bring the Family -- Camaro not required --
Premiere Bowling Alley, Pleasant Hill, IA Feb 8th, 2014 11:30 am (probably won't start bowling till noon) 1 1/2 hours of bowling (6 per lane), shoes, a pizza, and pitcher of pop (both for all 6 to share) will be around 9.25 per person (shoes normally alone are $3.50). Other food and drinks can be purchased too. Need head count so we can make sure we have enough lanes reserved. Either reply here or facebook (please don't do both or at least let me know you posted in both) |
01-29-2014, 07:49 PM | #6599 |
B.O.D. 02/16/10
Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010
Location: Albia,Iowa
Posts: 3,959
|
Welcome Lahmann SS. Bet the bench racing between you and Jason is going strong.
__________________
|
01-29-2014, 07:52 PM | #6600 |
B.O.D. 02/16/10
Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010
Location: Albia,Iowa
Posts: 3,959
|
So I'm deadheading to Fremont,NE in a van and I pull out my February Camaro Performers mag and on page 70 is "Tom" doing a burnout at the LS Fest! That two times in a mag Tim!!! Looking good as always.
__________________
Last edited by its a syn; 01-29-2014 at 08:15 PM. |
01-30-2014, 09:00 AM | #6601 |
Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011
Location: Cedar Falls, Iowa
Posts: 1,581
|
Yeah maybe if I could drive my car at the track. Haha. Lahmann and I had a pretty good head to head race until I couldn't shift into 2nd. I am already working on getting that issue cleared. I will be back at the track this spring.
__________________
2013 Camaro 1SS/RS - Ashen Gray Metallic
| LS3 | CAI Inductions, Inc Intake | Vmax Ported Throttle Body | Dynatech 1.875" Long Tube Headers | Apex Scoop & Washer Bottle Relocation | Lethal Racing Night Fury Cam | BTR 7.400" Push Rods |LS2 Dampener | Melling 10296 Oil Pump | IWIS Chain | BTR .660" Dual Valve Springs | BTR Trunion Upgrade Kit | Lethal Racing Tuned | Anvil Notch Spoiler | BMR Split Drop Springs | Eaton TrueTrac | GM 3.91 Gears | LPW Diff Cover | Rohana RF2 275/40 20x10F 315/35 20x11R | BMR Polyurethane Motor Mounts |
02-04-2014, 10:37 AM | #6602 |
|
If anyone is needing a NEW set of P-zeros on wheels...Sunline in Cedar Rapids has two sets on Midnight Silver wheels on the floor in the office. These were take offs from local dealers. $1000 with wheels, $800 without. Not sure about sensors. Not a mark on them. The nubs are still on the tires.
__________________
Cars and women are both going to give you problems...but you can pay somebody else to fix your car!
|
02-06-2014, 06:52 PM | #6603 |
|
Hope all have fun this weekend with bowling. Wish I could make it, but right now I need to take the OT thats for this Saturday as I am trying to get my cam parts bought and I just found out today that my furnace may need replacement in the near future...hopefully it sticks around for the rest of this winter.
__________________
2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan,
Holley fuel rail, Proform valve covers, relocated coil packs |
02-08-2014, 07:28 PM | #6604 |
I have a set of wheels, tires and sensor, removed from my SS only at best 300 miles on them. Also the original taillights. Send me a message.
__________________
|
|
02-12-2014, 09:29 AM | #6605 |
Member NHRA GoodGuys ICE
Drives: 2011 CGM 2SS/RS Join Date: May 2011
Location: Cedar Rapids Iowa
Posts: 363
|
Just checking in here. Havent been here for a while.
__________________
|
02-12-2014, 10:05 AM | #6606 |
Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011
Location: Cedar Falls, Iowa
Posts: 1,581
|
Welcome back Nitro. How's the winter treating you?
__________________
2013 Camaro 1SS/RS - Ashen Gray Metallic
| LS3 | CAI Inductions, Inc Intake | Vmax Ported Throttle Body | Dynatech 1.875" Long Tube Headers | Apex Scoop & Washer Bottle Relocation | Lethal Racing Night Fury Cam | BTR 7.400" Push Rods |LS2 Dampener | Melling 10296 Oil Pump | IWIS Chain | BTR .660" Dual Valve Springs | BTR Trunion Upgrade Kit | Lethal Racing Tuned | Anvil Notch Spoiler | BMR Split Drop Springs | Eaton TrueTrac | GM 3.91 Gears | LPW Diff Cover | Rohana RF2 275/40 20x10F 315/35 20x11R | BMR Polyurethane Motor Mounts |
02-12-2014, 11:39 AM | #6607 |
Member NHRA GoodGuys ICE
Drives: 2011 CGM 2SS/RS Join Date: May 2011
Location: Cedar Rapids Iowa
Posts: 363
|
Hey Jason, Like everyone else, I am tired of this crap !
Hope all is good with you.
__________________
|
02-12-2014, 11:42 AM | #6608 |
Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011
Location: Cedar Falls, Iowa
Posts: 1,581
|
I'm in a similar boat as you all. I'm ready for all the snow crap to be over with. I'm ready to lay the POWER down again! Oh, and install my headers.
__________________
2013 Camaro 1SS/RS - Ashen Gray Metallic
| LS3 | CAI Inductions, Inc Intake | Vmax Ported Throttle Body | Dynatech 1.875" Long Tube Headers | Apex Scoop & Washer Bottle Relocation | Lethal Racing Night Fury Cam | BTR 7.400" Push Rods |LS2 Dampener | Melling 10296 Oil Pump | IWIS Chain | BTR .660" Dual Valve Springs | BTR Trunion Upgrade Kit | Lethal Racing Tuned | Anvil Notch Spoiler | BMR Split Drop Springs | Eaton TrueTrac | GM 3.91 Gears | LPW Diff Cover | Rohana RF2 275/40 20x10F 315/35 20x11R | BMR Polyurethane Motor Mounts |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Properautocare Coupon Sale for Camaro5 Members | Angelo@Autopia | Wash/Wax/Detailing and Cosmetic Maintenance Parts | 2 | 12-11-2009 09:38 AM |
STS Turbo - Exclusive Offer for Camaro 5 Members - Ends Oct 10th!!! | ZZcamaro | Forced Induction | 64 | 10-19-2009 12:16 PM |
Messages to more than 5 members & Social Groups | heinzd01 | Site Related Announcements / Suggestions / Feedback / Questions | 5 | 09-16-2009 08:22 AM |