Solid Subframe Bushing install - Pegasus Review - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

camarosspower · 12-01-2016, 04:32 PM

Quote:

Originally Posted by Soybeanrice

You put the jack stands there correct?

And I have an idea of what you're talking about, but it's a flat spot so I wasn't too sure if it was usable.

Yes sir but don't put them to where you crush the lip. I put them on the flat surface. I did lift the car on 4 stands though much easier and safer I would say

camarosspower · 12-01-2016, 04:39 PM

Quote:

Originally Posted by dentnshell

Part of the sidways traction issues is due to the limited slip... If one side looses traction first or has more weight planted on it then you get a tire spine and a sideways lunge. I did a ZL1 Differential and Axles one weekend... the next weekend I did subframe busings.

The busing seemed to take care of the bumps way better... of course the limited slip in the ZL1 differential has a much tighter clutch pack. Depending on the power level of you car a posi-mod or Tru-Track may be in order!

I have the true Trac on it now. I also had the true Trac on my 10'ls3 and it never done this. Maybe a alignment with the subframe bushings will help.

2012LS3VERT · 12-15-2016, 01:19 PM

Finally back in stock, special sale price on the website for those that were patient, and as always, free shipping in the lower 48!

KillboyPowerhead · 12-15-2016, 01:24 PM

PM sent regarding shipping quote. I plan to buy as soon as I hear from you...!

2012LS3VERT · 12-15-2016, 02:39 PM

Quote:

Originally Posted by KillboyPowerhead

PM sent regarding shipping quote. I plan to buy as soon as I hear from you...!

PM sent!

camarosspower · 12-15-2016, 07:19 PM

Mine gets here Tuesday!!! Thanks again bud

2012LS3VERT · 12-16-2016, 10:50 AM

As always, Thanks and happy to help!

MudderFinger · 12-16-2016, 12:40 PM

I just ordered me a set, thanks

2012LS3VERT · 12-16-2016, 12:41 PM

Welcome, they are already on the way!

JOHNSONROD · 12-17-2016, 05:50 PM

mine will be here monday. im so excited to finally get those blubber bushings outta there. they were crap -500.

hammdo · 12-17-2016, 06:26 PM

You'll love them..especially at NCM ;o)

-Don

Kopterman · 12-17-2016, 07:36 PM

What is "NVH"?

dentnshell · 12-17-2016, 07:37 PM

Quote:

Originally Posted by Kopterman

What is "NVH"?

Noise Vibration Harshness

Don't worry about it... Solid bushings has been one of the single best suspension mods I have made.

Soybeanrice · 12-17-2016, 10:22 PM

Just got mine in! I know foam isnt a whole lot, but the packaging was presented very nicely and definitely above anything else I've bought.

12-16-2016, 12:40 PM	#36
MudderFinger Drives: 2011 IOM SS/RS Join Date: Dec 2010 Location: Virginia Posts: 887 View My Garage	I just ordered me a set, thanks __________________ My Build Thread

12-17-2016, 06:26 PM	#39
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	You'll love them..especially at NCM ;o) -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

12-15-2016, 01:19 PM	#31
2012LS3VERT Drives: 2012 2SSRS Vert, Black w/M6 Join Date: Jan 2013 Location: Montgomery, AL Posts: 1,265	Finally back in stock, special sale price on the website for those that were patient, and as always, free shipping in the lower 48!

12-15-2016, 01:24 PM	#32
KillboyPowerhead Drives: 2015 Z/22 Join Date: Aug 2015 Location: Ontario, Canada Posts: 931	PM sent regarding shipping quote. I plan to buy as soon as I hear from you...!

12-15-2016, 07:19 PM	#34
camarosspower Drives: 2010 camaro ss Join Date: Jun 2010 Location: Port Arthur, Tx Posts: 2,383	Mine gets here Tuesday!!! Thanks again bud

12-16-2016, 10:50 AM	#35
2012LS3VERT Drives: 2012 2SSRS Vert, Black w/M6 Join Date: Jan 2013 Location: Montgomery, AL Posts: 1,265	As always, Thanks and happy to help!

12-16-2016, 12:41 PM	#37
2012LS3VERT Drives: 2012 2SSRS Vert, Black w/M6 Join Date: Jan 2013 Location: Montgomery, AL Posts: 1,265	Welcome, they are already on the way!

12-17-2016, 05:50 PM	#38
JOHNSONROD Drives: 62 Chevy & 2021 1SS/1LE manual Join Date: Aug 2010 Location: Kentucky Posts: 893	mine will be here monday. im so excited to finally get those blubber bushings outta there. they were crap -500.

12-17-2016, 07:36 PM	#40
Kopterman Drives: 2014 Bright Yellow 2SS/RS Join Date: Apr 2014 Location: NH Posts: 794 View My Garage	What is "NVH"?

12-17-2016, 10:22 PM	#42
Soybeanrice Drives: 2014 2SS/RS Join Date: Jun 2013 Location: Orlando, FL Posts: 793	Just got mine in! I know foam isnt a whole lot, but the packaging was presented very nicely and definitely above anything else I've bought.