Just got my car back! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

damian559 · 01-15-2016, 03:45 PM

I just got back from picking up my car and I'm so excited! I had it in the shop to install my Nitrous Outlet kit and do the rear suspension. On a 150 shot I made 608 RWHP and 715 RWTQ! I took it out to an empty highway on my way home and did a 40-140...HOLY SHIT it feels like a totally different car.

Moreair1 · 01-15-2016, 03:50 PM

Congrats looks like a pretty sic set up you have

damian559 · 01-15-2016, 04:01 PM

Quote:

Originally Posted by Moreair1

Congrats looks like a pretty sic set up you have

Thank you! I think my shop did a very clean job of wiring and installing everything.

1KillerSS · 01-15-2016, 11:19 PM

Very nice! Now where is the video?

ROD_SS · 01-15-2016, 11:26 PM

Quote:

Originally Posted by 1KillerSS

Very nice! Now where is the video?

+1

damian559 · 01-16-2016, 01:04 AM

I only have a dyno pull right now.

RealQuick · 01-16-2016, 07:28 AM

Clean install!

pincushin3819 · 01-16-2016, 10:17 AM

Bad A$$!

Jaybird4u · 01-16-2016, 10:20 AM

May I ask how much the whole setup cost with install?

Flow master American Thunder axel back with high flow cats, cold air intake, Vmax ported TB, Vitesse throttle controller, Diode Dynamics lighting, 35% tint, hood spears, Stillen splitter, custom tune.

damian559 · 01-16-2016, 01:37 PM

Here's a break down of the cost of all the parts. These are the retail costs, but I waited and bought all my stuff from Nitrous Outlet during their 15% off Black Friday sale. I also bought stuff that you could get cheaper, for example I bought the heated billet bottle bracket. You can save $200 if you go for the non-billet one.

$650-Nitrous Outlet Single Fogger Kit w/ 10lb bottle
$260-Nitrous Outlet Remote Bottle Opener
$70-Nitrous Outlet Switch Panel
$425-Nitrous Outlet Heated Billet Bottle Bracket
$140-Nitrous Outlet "Big Show" Purge Kit
$140-Nitrous Outlet Fuel Line Crossover
$275-Lingenfelter LNC-2000
$160-NOS Window Switch
$420-Innovate PSN-1 AFR/Bottle Pressure Gauge
$90-SLP Single Gauge Pod
$20-NGK BR7EF Plugs

Then it was $800 to install everything and for dyno time.

Jaybird4u · 01-16-2016, 03:05 PM

Can Nitrous be added to a car that has been supercharged?

Flow master American Thunder axel back with high flow cats, cold air intake, Vmax ported TB, Vitesse throttle controller, Diode Dynamics lighting, 35% tint, hood spears, Stillen splitter, custom tune.

damian559 · 01-16-2016, 04:04 PM

Yes it can.

flyer08 · 01-16-2016, 04:06 PM

With the PSN-1, can you hook it up to something like HP Tuners to monitor AFR? I'm not sure what all to expect since mine is on back order.

Quote:

Originally Posted by Jaybird4u

Can Nitrous be added to a car that has been supercharged?

Flow master American Thunder axel back with high flow cats, cold air intake, Vmax ported TB, Vitesse throttle controller, Diode Dynamics lighting, 35% tint, hood spears, Stillen splitter, custom tune.

Just have a really good tuner

Jaybird4u · 01-16-2016, 04:36 PM

My supercharger is being installed in a couple of weeks. I'm sure that will be plenty of power but just In case it isn't it's nice to know I can add Nitrous if I so choose.

01-15-2016, 03:45 PM	#1
damian559 Drives: 2015 1SS, 1LE, Recaro, NPP Join Date: Apr 2014 Location: Fresno, CA Posts: 927	Just got my car back! I just got back from picking up my car and I'm so excited! I had it in the shop to install my Nitrous Outlet kit and do the rear suspension. On a 150 shot I made 608 RWHP and 715 RWTQ! I took it out to an empty highway on my way home and did a 40-140...HOLY SHIT it feels like a totally different car. __________________ 2015 Summit White 1SS, 1LE, Recaros, NPP 498 RWHP 447 RWTQ (Motor) 647 RWHP 723 RWTQ (150 Shot) 12.1 @ 117 (Motor) 11.7 @ 129 (Nitrous) Nitrous Outlet Single Nozzle Kit \| Stand Alone Fuel Cell w/ C16 \| Custom Grind Cam \| Stainless Power 1 7/8 LT Headers \| CAI Intake \| ATI Super Damper \| BMR Trailing Arms & Toe Links \| Prothane Polyurethane Sub-frame Bushings \| JDP Upper Control Arm Bushings \| MT Drag Radials \| Tuned by SS Motorsports Youtube Channel: Click Here

01-15-2016, 11:19 PM	#4
1KillerSS Too much is never enough! Drives: AGP TT SS [COTW] 4/20/15 Join Date: Feb 2014 Location: Toledo,OH Posts: 4,149 View My Garage	Very nice! Now where is the video? __________________ AGP TT kit, 54/57 Forged rotating assembly, Custom grind cam... Dual nozzle meth, ID850's, Livernois dual fuel pumps, ECS BAP, 25% UDP, 3 inch Magnaflow catback with X pipe, Mantic 9000 clutch, DSS 1000hp axles, DSS aluminum driveshaft, ZL1 rear end, solid subframe bushings, HE differential offset bushings, BMR Trailing arm, BMR toe rods, Lingenfelter LNC-2000,SJM Line Lock. 747 whp 714wtq *Build thread* http://www.camaro5.com/forums/showth...55#post8107855

01-16-2016, 10:20 AM	#9
Jaybird4u Drives: 2014 SS/RS Join Date: Mar 2015 Location: WV Posts: 150	May I ask how much the whole setup cost with install? Flow master American Thunder axel back with high flow cats, cold air intake, Vmax ported TB, Vitesse throttle controller, Diode Dynamics lighting, 35% tint, hood spears, Stillen splitter, custom tune. __________________ Color Red Rock, Kooks LT Headers with High FLow cats, Flowmaster American Thunder Axel back, Vmax ported TB, Kenne Bell 2.8 Liquid cooled supercharger, 560 RWHP, Stillen splitter, Vitesse throttle controller, BMR sway bars, BMR 1.2" front springs and 1.0" rear springs, BMR upgraded front end links, 35% tint, Diode Dynamics interior and exterior lighting, Carbon fiber Bowties, Hood spears.

01-16-2016, 01:37 PM	#10
damian559 Drives: 2015 1SS, 1LE, Recaro, NPP Join Date: Apr 2014 Location: Fresno, CA Posts: 927	Here's a break down of the cost of all the parts. These are the retail costs, but I waited and bought all my stuff from Nitrous Outlet during their 15% off Black Friday sale. I also bought stuff that you could get cheaper, for example I bought the heated billet bottle bracket. You can save $200 if you go for the non-billet one. $650-Nitrous Outlet Single Fogger Kit w/ 10lb bottle $260-Nitrous Outlet Remote Bottle Opener $70-Nitrous Outlet Switch Panel $425-Nitrous Outlet Heated Billet Bottle Bracket $140-Nitrous Outlet "Big Show" Purge Kit $140-Nitrous Outlet Fuel Line Crossover $275-Lingenfelter LNC-2000 $160-NOS Window Switch $420-Innovate PSN-1 AFR/Bottle Pressure Gauge $90-SLP Single Gauge Pod $20-NGK BR7EF Plugs Then it was $800 to install everything and for dyno time. __________________ 2015 Summit White 1SS, 1LE, Recaros, NPP 498 RWHP 447 RWTQ (Motor) 647 RWHP 723 RWTQ (150 Shot) 12.1 @ 117 (Motor) 11.7 @ 129 (Nitrous) Nitrous Outlet Single Nozzle Kit \| Stand Alone Fuel Cell w/ C16 \| Custom Grind Cam \| Stainless Power 1 7/8 LT Headers \| CAI Intake \| ATI Super Damper \| BMR Trailing Arms & Toe Links \| Prothane Polyurethane Sub-frame Bushings \| JDP Upper Control Arm Bushings \| MT Drag Radials \| Tuned by SS Motorsports Youtube Channel: Click Here

01-16-2016, 03:05 PM	#11
Jaybird4u Drives: 2014 SS/RS Join Date: Mar 2015 Location: WV Posts: 150	Just got my car back! Can Nitrous be added to a car that has been supercharged? Flow master American Thunder axel back with high flow cats, cold air intake, Vmax ported TB, Vitesse throttle controller, Diode Dynamics lighting, 35% tint, hood spears, Stillen splitter, custom tune. __________________ Color Red Rock, Kooks LT Headers with High FLow cats, Flowmaster American Thunder Axel back, Vmax ported TB, Kenne Bell 2.8 Liquid cooled supercharger, 560 RWHP, Stillen splitter, Vitesse throttle controller, BMR sway bars, BMR 1.2" front springs and 1.0" rear springs, BMR upgraded front end links, 35% tint, Diode Dynamics interior and exterior lighting, Carbon fiber Bowties, Hood spears.

01-15-2016, 03:50 PM	#2
Moreair1 Drives: 2011 ss convertible Join Date: Jul 2015 Location: Colorado Posts: 1,329 View My Garage	Congrats looks like a pretty sic set up you have

01-16-2016, 07:28 AM	#7
RealQuick Drives: 2010 Camaro 2SS M6 - Intake/Exhaust Join Date: Sep 2014 Location: Bridgewater Posts: 693	Clean install!

01-16-2016, 10:17 AM	#8
pincushin3819 Drives: 11 AGP TT SS, 14 ECS C7 Join Date: May 2012 Location: Anderson, SC Posts: 352	Bad A$$!

01-16-2016, 04:04 PM	#12
damian559 Drives: 2015 1SS, 1LE, Recaro, NPP Join Date: Apr 2014 Location: Fresno, CA Posts: 927	Yes it can. __________________ 2015 Summit White 1SS, 1LE, Recaros, NPP 498 RWHP 447 RWTQ (Motor) 647 RWHP 723 RWTQ (150 Shot) 12.1 @ 117 (Motor) 11.7 @ 129 (Nitrous) Nitrous Outlet Single Nozzle Kit \| Stand Alone Fuel Cell w/ C16 \| Custom Grind Cam \| Stainless Power 1 7/8 LT Headers \| CAI Intake \| ATI Super Damper \| BMR Trailing Arms & Toe Links \| Prothane Polyurethane Sub-frame Bushings \| JDP Upper Control Arm Bushings \| MT Drag Radials \| Tuned by SS Motorsports Youtube Channel: Click Here

01-16-2016, 04:36 PM	#14
Jaybird4u Drives: 2014 SS/RS Join Date: Mar 2015 Location: WV Posts: 150	My supercharger is being installed in a couple of weeks. I'm sure that will be plenty of power but just In case it isn't it's nice to know I can add Nitrous if I so choose. __________________ Color Red Rock, Kooks LT Headers with High FLow cats, Flowmaster American Thunder Axel back, Vmax ported TB, Kenne Bell 2.8 Liquid cooled supercharger, 560 RWHP, Stillen splitter, Vitesse throttle controller, BMR sway bars, BMR 1.2" front springs and 1.0" rear springs, BMR upgraded front end links, 35% tint, Diode Dynamics interior and exterior lighting, Carbon fiber Bowties, Hood spears.