You are browsing camaro5 
 |
|
11-20-2018, 07:39 PM
|
#1 |
 Drives: '10 Camaro 2SS Join Date: Jul 2013
Location: Charlotte, NC
Posts: 428
|
Return Style Fuel Line Length
How much fuel line do I need to buy for a return style system? For now using stock rails. Using stock feed line as the return.
|
|
|
|
11-21-2018, 05:57 AM
|
#2 |
 
|
Will all depend on how and where you run your line. I ran mine through the frame rail on the passenger side, but I bought the SQUASH dual fuel pump kit that had all the fittings, lines, and etc.
__________________
1969 SS: SS/DA 427 CI/Auto
2011 SS-2 LS3 M6 MODS: P1X ProCharger, Squash dual fuel pumps, ID fuel injectors, Cam: Pat G designed/EPS Ground (228/234 .629”/.629” 114 LSA +4 advance), Lethal Racing ported throttle-body and intake manifold, Kooks 1 7/8” Long Tube Headers, Dynomax Bullet Cat-Back System, Skip Shift Eliminator  |
|
|
|
|
11-22-2018, 07:29 PM
|
#3 |
 Drives: 2011 camaro 2SS RS Join Date: Apr 2014
Location: Iowa
Posts: 75
|
I just installed the fore innovations fuel system full return style and they sent 30ft and i had about 4 ft left over
|
|
|
|
|
11-22-2018, 07:37 PM
|
#4 | |
|
Drives: '10 Camaro 2SS Join Date: Jul 2013
Location: Charlotte, NC
Posts: 428
|
Quote:
|
|
|
|
|
|
11-22-2018, 07:41 PM
|
#5 |
|
Drives: 2011 camaro 2SS RS Join Date: Apr 2014
Location: Iowa
Posts: 75
|
i would sure think so
|
|
|
|
|
11-23-2018, 02:28 PM
|
#6 |
    
|
If you're running from the fuel tank and up to the motor, you need more than 15 feet....unless you are running it straight up the trans tunnel and into the fuel rail.
I used about 23 feet for my AGP twin pump setup, utilizing the passenger side frame rail, with the line exiting the frame rail about 4 inches behind the radiator (between the radiator and A/C compressor) going up to a regulator mounted near the ABS module.
__________________
745RWHP/634RWTQ on 93 @ 10psi
806/676 on E85 @ 10psi  COTW 9/8/14 |
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
