10-19-2018, 03:38 PM | #1 |
Drives: 2016 camaro 2ss Join Date: Nov 2016
Location: houston tx
Posts: 32
|
Tips on ati pulley install
Looking for any tips on installing the ati pulley anything is appreciated
|
10-19-2018, 06:41 PM | #2 |
BAMF SS
|
It's pretty straight forward.
1/2 breaker bar with 3' cheater pipe on it got my balancer bolt off easy peasy Make sure you dont hit the thermostat housing when breaking it loose (ask me how I know). Use a new GM bolt, ARP doesnt fit.... you will have to grind a very small amount off the side of the factory bolt. Just a few quick spins against a grinder
__________________
2016 1SS A8: FBO + Circle D + P1X + Meth + Tuned by Pray Performance
Stock Longblock 800 SAE rwhp. 9.4 @ 145 mph. |
10-19-2018, 08:15 PM | #3 |
Drives: 14 Silverado LTZ Z71, 16 Camaro SS Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 4,407
|
https://www.camaro6.com/forums/showthread.php?t=524649
Dan is right for once Just use a stock bolt Also the smaller ac belt doesn’t have a tensioner. You have to roll it on and off with a screwdriver wedged in as you turn the crank. You’ll figure it out... |
10-20-2018, 03:06 AM | #4 | |
Drives: 2017 Grand Sport Join Date: Oct 2013
Location: NC
Posts: 54
|
Quote:
Just found out I don't have an UD option for my car
__________________
17' Grand Sport
PP ported MSD IM, NW 103mm TB, ARH 2" headers w/ 3" catted x-pipe, PP Flex Fuel tune, Halltech CAI, some radials and a CATCHCAN!!! |
|
|
|
Post Reply
|
|
|