WELD RTS Wheels!! Lets see them :) - Page 10 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

atomicfusion · 09-20-2016, 10:38 AM

Quote:

Originally Posted by Paul13camaro

Blake-b could you tell me what the offset is on your front an rear wheels? I'm getting ready to order. Atomicfusion what kind of deals do you have on the rts all black shell the new ones

I can't quote prices on the forum because of MAP pricing policies, but if you PM me I will quote whatever you want... I will match or beat anyone else's pricing on wheels FYI.

blake-b · 09-20-2016, 03:35 PM

Quote:

Originally Posted by Paul13camaro

Blake-b could you tell me what the offset is on your front an rear wheels? I'm getting ready to order. Atomicfusion what kind of deals do you have on the rts all black shell the new ones

The front wheel part numbers are W71HB8090N61A-18X9 WELD RACING RT-S BLACK HIGH PAD 6.1"BS
Front backspace is 28mm

The rear wheel part numbers are W71HB8110N76A-18X11 WELD RACING RT-S BLACK HIGH PAD 7.6"BS
Rear backspace is 41mm

Paul13camaro · 09-20-2016, 04:16 PM

Sweet ...thank you. Do you like how the rear wheels sit hard to tell from the pic how flush they ate will they tuck into the wheel well if you go lower with the car?

blake-b · 09-20-2016, 04:19 PM

I do like the way they sit. I have not checked to see how much lower I can go as I think it is low enough. The tires are pretty even with the edge of the wheel well. I can't go take any pictures to demonstrate it because the car is out of town getting some work done to it.

Cooks ZL1 · 11-25-2016, 06:51 AM

Quote:

Originally Posted by D3R3K

Weld ftw!

What size is your front wheels and what tire and size is on them?

Cooks ZL1 · 11-25-2016, 06:53 AM

Quote:

Originally Posted by mustang50lx

Finally got my wheels. I ended up having to use aftermarket bolt in TPMS sensors. I also had to grind a little off the front sensors to get them in straight.

What size wheels Re yours and what tire and size are your tires?

TXM62SS · 01-04-2018, 03:22 PM

Weld S77B's that have been powder coated Porsche Silver. 18x9 Fronts with Nitto 555 and 18x10.5 with Nitto 555R. Have some center caps being powder coated to match the wheels. Thanks to Carlyle Racing for the wheels and Clarity Detailing for the powder coat.

atomicfusion · 01-05-2018, 02:49 PM

Quote:

Originally Posted by Motorboy8769

I have a similar issue on my truck I can't get a impact socket on the lug nuts. It won't fit in the hole in the rims. Is that the space you are referring to?

I have these in stock!

darkmanx · 02-01-2018, 05:49 PM

Who has welds s77 15 inch in stock ?

atomicfusion · 02-02-2018, 08:25 AM

Quote:

Originally Posted by darkmanx

Who has welds s77 15 inch in stock ?

I have a pair of weld S77 15x10 Single beadlocks in stock as well as a pair of S79s in stock!

888-307-9186

adrwhi · 06-23-2018, 07:11 AM

Going with a bigger tire in rear soon

10aSSee D · 07-15-2018, 07:56 PM

I really need to get me some welds!! I want to get the beadlocks on mine. Guess I just need to pull the trigger.

Dirtmod66 · 08-17-2018, 05:06 PM

Quote:

Originally Posted by adrwhi

Going with a bigger tire in rear soon

What size rims are you running?

Lnch Mny · 09-28-2018, 09:19 AM

Finally got a set of WELDs!!!!

01-04-2018, 03:22 PM	#133
TXM62SS Drives: 2012 2SS/RS LS3 Join Date: May 2012 Location: Pearland, TX Posts: 388	New Welds Weld S77B's that have been powder coated Porsche Silver. 18x9 Fronts with Nitto 555 and 18x10.5 with Nitto 555R. Have some center caps being powder coated to match the wheels. Thanks to Carlyle Racing for the wheels and Clarity Detailing for the powder coat. __________________ Victory Red 2012 2SS/RS LS3 Camaro Pat G. Spec Cam from Cam Motion 228/236 .599/.599 112+2LSA Kooks 1-7/8" LTs w/ Cats Roto-Fab, Bo White TB, Borla Touring Catback 3.91 1LE Gears, MGW Tuned by Pat G Last edited by TXM62SS; 01-07-2018 at 10:30 AM.

06-23-2018, 07:11 AM	#137
adrwhi MonstaBGP Drives: Shadow Join Date: Mar 2011 Location: Valdosta Ga Posts: 186 View My Garage	215/325 Going with a bigger tire in rear soon Attached Images

07-15-2018, 07:56 PM	#138
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	I really need to get me some welds!! I want to get the beadlocks on mine. Guess I just need to pull the trigger. __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq

09-28-2018, 09:19 AM	#140
Lnch Mny Drives: IBM Camaro Join Date: Jul 2009 Location: Decatur, IL Posts: 266 View My Garage	Finally got a set of WELDs!!!! Attached Images

09-20-2016, 04:16 PM	#129
Paul13camaro Drives: 2013 camaro 2ss/rs m6 Join Date: Aug 2016 Location: Wisconsin Posts: 33	Sweet ...thank you. Do you like how the rear wheels sit hard to tell from the pic how flush they ate will they tuck into the wheel well if you go lower with the car?

09-20-2016, 04:19 PM	#130
blake-b Drives: 2009 ZR1 Join Date: May 2010 Location: KCMO Posts: 3,205	I do like the way they sit. I have not checked to see how much lower I can go as I think it is low enough. The tires are pretty even with the edge of the wheel well. I can't go take any pictures to demonstrate it because the car is out of town getting some work done to it.

02-01-2018, 05:49 PM	#135
darkmanx Drives: vroom Join Date: Dec 2012 Location: FL Posts: 34	Who has welds s77 15 inch in stock ?