SW Ohio Spring 2011 Mod Day & Car Show

[masterwinning]

I transported a 72 inch long aquarium light in my car. It was to good of a deal to pas up and the guy said if I could get it in my car he would knock ten percent off, he was a mustang guy trying t make me look bad. Well after a wiggle here, and a jiggle there, it fit. I had to put the back seats down, slid the front seat all the way forward and lean it forward. Lift up, push down, slide right, slide left, push down while lifting up and it will work.

[Darth_Emma]

I would have no problem with the spoiler except I can't anything through the pass through in the trunk. I have this in the way.

[IROCanSS]

Yup... bumps in the trunk...

[masterwinning]

Well can you take one of them out and slide it through the hole? That or just put it on the roof, use some rope or something to tie it down, and of course the hand out the window holding it on is mandatory.

[heinzd01]

Originally Posted by cntryman77

April 2nd is the week after Camaros for Heros...not sure if I can get 2 weekends off in a row...I don't really have any mods to do, but wanted to try to make the next date to visit

cntryman77,

A new Camaro LS owner has contacted me about possibly attending mod day and getting help installing halos. Do you have experience installing halos and would be able and willing to significantly help this new owner install halos on his Camaro?

I don't have a problem removing the headlight assembly; however, I am concerned about disassembling and modifying the headlight assembly.

If anyone attending mod day has experience installing halos, please let me know.

[IROCanSS]

I don't but we may be able to get cntryman77 down as long as we can pry him away form work!! Did you PM him?

[cntryman77]

Originally Posted by heinzd01

cntryman77,

A new Camaro LS owner has contacted me about possibly attending mod day and getting help installing halos. Do you have experience installing halos and would be able and willing to significantly help this new owner install halos on his Camaro?

I don't have a problem removing the headlight assembly; however, I am concerned about disassembling and modifying the headlight assembly.

If anyone attending mod day has experience installing halos, please let me know.

I can help...I actually got Eagle Eye headlights which was a whole new headlight assembly...cheaper than getting the OEMS ($450 vs $1200)...if they are just changing the halos in the OEM projectors, it doesn't look too hard...wiring is always the bugger with light mods...maybe I'll use the day to finally put my fog lights in...of course I need to pick some first...I'm thinking a 3" projector headlight with a LED halo, then swapping the fog bulb for a LED as well...& I'm not cutting my bezels, I'm just going to buy a painted set that's already cut...I'm lazy that way

[TLSTWIN]

Originally Posted by cntryman77

...I'm thinking a 3" projector headlight with a LED halo, then swapping the fog bulb for a LED as well...& I'm not cutting my bezels, I'm just going to buy a painted set that's already cut...I'm lazy that way

I will be interested how that works out....I want to do a similar thing, but don't want to cut my stuff up.

[cntryman77]

Originally Posted by TLSTWIN

I will be interested how that works out....I want to do a similar thing, but don't want to cut my stuff up.

if you want to paint them yourself....
http://www.rockauto.com/catalog/rafr...457118-8943167

I'm looking already painted....
http://rpidesigns.com/shop/item.aspx?itemid=1900

& you already have fog lights...your bezels are already cut...mine are solid since I have none...LOL...aren't the factory fogs 3" ?

I'm looking at something like this
http://cgi.ebay.com/ebaymotors/ws/eB...15896&viewitem=
or this
http://cgi.ebay.com/ebaymotors/ws/eB...77630&viewitem=

[photonfury]

Update --
Shipment tracking says the oil catch can's will be here by Friday. If you'd like to pay before mod day, now that it is in May, then you can pay me via paypal. $85 photonfury@yahoo.com

I can hook the locals up with their cans before mod day. Others i may be able to arange a trip out your way if you'd like it early.

Pay Status:
PhotonFury -- Paid, Delivered
jrhaus76 -- Paid, Delivered
masterwinning -- Paid, Delivered
bonemaro -- Paid
SilverIceMan -- Paid
Jurox -- Delivered
Dragom -- Paid
Drew10

http://www.billetdepot.com/chevrolet...camaro-10.html

[IROCanSS]

I am good with mod day and I will pay you now. THANKS!

[photonfury]

Hey Jason, do you know what my car has in it as far is fluid changes? I don't remember what Randy told me.

[bartking]

Seems like I'm not keeping up on reading my camaro5 threads BUT... I'd like to go and May 7th is perfect.

I'd like some help with rear diff and break fluids. Any other fluids my Automatic car might need?

I'll do my own oil since it'll be due before May.

[IROCanSS]

Originally Posted by photonfury

Hey Jason, do you know what my car has in it as far is fluid changes? I don't remember what Randy told me.

You for sure have Mobil 1 ATF in the tranny and I believe Mobil 1 in the diff. Also, i sent payment. Disregard the address. its my old address. Just bring the can to Mod Day!

Originally Posted by bartking

Seems like I'm not keeping up on reading my camaro5 threads BUT... I'd like to go and May 7th is perfect.

I'd like some help with rear diff and break fluids. Any other fluids my Automatic car might need?

I'll do my own oil since it'll be due before May.

You have been behind! I can help with the brake fluid and diff fluid. both are easy. Can I ask why you want to change the brake fluid on your A6? It should be fine unless you have a boatload of miles. We can take a look.