11-30-2012, 08:13 PM | #1 |
Drives: 2018 MBM ZL1 Auto Join Date: Sep 2009
Location: San Juan, Puerto Rico
Posts: 960
|
Computer could not read my car
My car was at the dyno tuner today. They've done a bunch of Camaros and they say mine is the first one that their computer cannot read the ECU or whatever it is it reads. They're going to try again next week when he figures out what's happening but I though I'd ask here if anyone has any recommendations.
What they were able to do was run it to get the untuned hp. It is a Mustang Dyno and it measured 341 peak whp. Does that sound OK for my mods? (See my garage)
__________________
.
|
12-04-2012, 07:43 AM | #2 |
Run like Hell!!
__________________
2010 L99 Black on Black W/Ground effects
Mods: Kenne Bell, LS3 Conversion, LS9 cam, BMR Stage 2 |
|
12-09-2012, 01:13 PM | #3 |
Drives: 2016 Camaro 1SS A8, 1998 K1500 5spd Join Date: Aug 2010
Location: Russell Springs, Kentucky
Posts: 172
|
Maybe they have a faulty interface? Not sure where the obd2 port gets its power. Most common place is the aux power fuse. Maybe that fuse is blown?
Did you buy your car new or used? If you bought it used maybe the previous owner had it tuned at some point and when they flashed it back to stock they may have forgot to unlock the PCM? There's a number of things that could cause this. Kinda hard to diagnose over the Internet but that'll give you a good place to start
__________________
*2016 1SS A8-12.100 @115 Bone Stock.
11.54 @116 with cat delete, converter and dr's Previous Rides 2010 Camaro 1SS M6-12.14 @114 Bolt Ons 2014 GMC Sierra SLT 5.3/6L80 |
12-09-2012, 04:21 PM | #4 |
ʇuɐıʌǝp lɐıɔos
Drives: 2011 2SS/RS LS3/M6 Join Date: Feb 2011
Location: Pennsylvania
Posts: 231
|
|
12-10-2012, 11:06 AM | #5 |
Drives: 2018 MBM ZL1 Auto Join Date: Sep 2009
Location: San Juan, Puerto Rico
Posts: 960
|
Update:
It was the EFI Live tuning software. The tuner needed an update. Tuned the car last Friday. I love my new beast. 363hp/379tq.
__________________
.
|
|
|
|
|