08-15-2018, 06:10 AM | #1 |
Drives: 1995 m6 F1a Join Date: Jul 2014
Location: waupun wi
Posts: 62
|
Complete 5th Gen Camaro rear cradle 1500+ hp Strange Bmr
Hey guys. I’m selling the complete rear cradle out of my 2010 Camaro. U can unbolt yours and bolt this right into your car. All the labor of swapping parts is done for you. This has the best of the best parts on it. 1500+ hp rated.
Bmr 15” conversion Bmr drag sway bar Bmr drag suspension with 2-way adjustable Strange shocks Strange S60 IRS housing (3.55 gears with S-Trac differential, and 1350-sytle driveshaft yoke) G Force 1500+hp axles (where just sent I and had new joints installed. 2 year warranty) Bmr rear cradle bushings Bmr upper A arm bushings Also just installed new wildwood pads ($100.00) To buy just the parts with no shipping or install is just under 10k. Plus this comes with my rear cradle. I do not need your old cradle (you can sell yours also complete). Here are the links to the parts. I’m located in Waupun wi. I will ship if buyer covers shipping. I have a driver that goes through Chicago and as far as Detroit MI almost weekly. I may be able to get it on that truck for a small fee. I also have some buddies that drive truck that might help out if you are near their destinations. Im not in a big hurry to sell so im not looking to give it away OR part it out. As of now if it sells id like to sell it complete. As of now its still in the car. if your in the area and want to go for a ride b4 i remove it your more than welcome to. 7300.00 Cash Call or text 9202109448 https://www.bmrsuspension.com/… https://www.bmrsuspension.com/… https://www.strangeengineering.net/p...sembly-2.html/ https://gforce1320.com/…/5th-gen-cam...-stran…/ http://m.bmrsuspension.com/?page=pro...productid=1002 https://www.bmrsuspension.com/… https://www.bmrsuspension.com/… Last edited by blown383z28; 09-28-2018 at 05:11 AM. |
08-22-2018, 12:26 PM | #2 |
Drives: 1995 m6 F1a Join Date: Jul 2014
Location: waupun wi
Posts: 62
|
up top.
|
08-31-2018, 05:43 AM | #3 |
Drives: 1995 m6 F1a Join Date: Jul 2014
Location: waupun wi
Posts: 62
|
7500.00
|
09-07-2018, 11:32 AM | #4 |
Drives: 2014 Camaro SS 1LE Join Date: Jul 2014
Location: Plano, TX
Posts: 387
|
Would you sell the 15” conversion and brakes?
|
09-10-2018, 09:13 AM | #5 |
Drives: 1995 m6 F1a Join Date: Jul 2014
Location: waupun wi
Posts: 62
|
still as of right now id like to sell it all complete. will post up if i start to part it out.
|
09-12-2018, 07:27 AM | #6 |
Drives: 2014 Camaro SS 1LE Join Date: Jul 2014
Location: Plano, TX
Posts: 387
|
Ok just send me a DM if you decide to part it out. I already have LP 9.5” rear end
|
09-12-2018, 09:46 AM | #7 |
Drives: 2010 Camaro SS Join Date: Aug 2017
Location: Phoenix, Arizona
Posts: 67
|
bump for being a bad a$$ setup. Wish i had 8k laying around.
|
09-19-2018, 06:46 AM | #8 |
Drives: 1995 m6 F1a Join Date: Jul 2014
Location: waupun wi
Posts: 62
|
thanks Zapp!
up top Last edited by blown383z28; 09-21-2018 at 06:16 AM. |
09-19-2018, 08:18 PM | #9 |
Drives: 2013 Camaro SS 1LE Join Date: Jun 2013
Location: Houston
Posts: 66
|
Let me know if you decide to part out. I would be interested in the diff and axles.
|
09-28-2018, 05:11 AM | #10 |
Drives: 1995 m6 F1a Join Date: Jul 2014
Location: waupun wi
Posts: 62
|
up top.
7300.00 |
09-28-2018, 12:59 PM | #11 |
Drives: 2013 chevrolet Camaro A6 ZL1 Join Date: Aug 2016
Location: NY
Posts: 47
|
interested in G Force axles if you decided to part out
|
10-08-2018, 08:40 AM | #12 |
Drives: 1995 m6 F1a Join Date: Jul 2014
Location: waupun wi
Posts: 62
|
up top.
|
10-25-2018, 02:29 PM | #13 |
Drives: 1995 m6 F1a Join Date: Jul 2014
Location: waupun wi
Posts: 62
|
up again...
|
11-04-2018, 05:29 PM | #14 |
Drives: GMC Yukon XL Denali Join Date: Dec 2015
Location: Little Rock, AR
Posts: 48
|
I'd be interested in the Strange rear if you decide to part out.
|
|
|
|
|