You are browsing camaro5 
 |
|
02-18-2017, 10:24 AM
|
#1 |
  Drives: 2011 convertible 2ss/rs Join Date: Sep 2015
Location: Houston
Posts: 971
|
Head gaskets diameter selection
So im building a 402 6.0 iron block, the rule for picking gaskets diameter is .030-.060 over the stock bore right since the top of cylinder is chamfered at the top or does it needs to be all the way up to .100 on gasket selection. I will be using a agp twin kit.
|
|
|
 |
|
|
