Atlanta Club Lounge - Page 441 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

DarkFox1 · 04-02-2012, 12:59 PM

Here's a photo for the bored.

hightower · 04-02-2012, 01:04 PM

Well it ain't exactly a looker! But I've seen worse!

454 big block, 12 bolt rear end swap, GO!

DarkFox1 · 04-02-2012, 01:06 PM

I got a built LQ4.. should be able to drop 400-450whp to the tires ready for a hood to go under (in a few weeks maybe..)
But the v6-->v8 conversion aint pretty in these cars.

That stack of tires in the background are factory snowflake 16s that SHOULD have come on this car. Those ugly black rims are steel and they're scuffed up pretty bad.

csjcsj · 04-02-2012, 08:21 PM

Looks easy, but how difficult is it to take a valve cover off???? Wanna maybe check to see if anything is loose with my ticking going on!

Will I have to get a new gasket is my main thing!?????!!!

Southern Comfort · 04-02-2012, 08:28 PM

Quote:

Originally Posted by csjcsj

Looks easy, but how difficult is it to take a valve cover off???? Wanna maybe check to see if anything is loose with my ticking going on!

Will I have to get a new gasket is my main thing!?????!!!

How many miles on them? since the cam went in?

csjcsj · 04-02-2012, 08:41 PM

20,000 roughly!

Stark · 04-02-2012, 10:47 PM

Quote:

Originally Posted by DarkFox1

Here's a photo for the bored.

I like it neighbor!

I say keep it, wrench on it, make it a "low budget, high fun" car!!!
Or.......i'll give you $500

My vert needs spare parts....

csjcsj · 04-03-2012, 07:07 AM

Them are some FUGLY rims! Ewww!

ljustin293 · 04-03-2012, 07:28 AM

We are working hard all ready for the John Thornton Chevrolet Cruise-in tonight. I hope to see some of y'all there!

DarkFox1 · 04-03-2012, 07:58 AM

the dealership in lithia springs?

A Tuesday seems like an odd day for a cruise in.

DarkFox1 · 04-03-2012, 08:00 AM

Quote:

Originally Posted by Stark

I like it neighbor!

I say keep it, wrench on it, make it a "low budget, high fun" car!!!
Or.......i'll give you $500

My vert needs spare parts....

I'll take $700 for it.

(no really.. The title is on it's way from the DMV.)

I started it up yesterday. I WAS gonna pull it around and pull that bumper off, maybe get to priming it but.. It was already 6:30 and the c5 gets the garage so.. maybe this weekend.

I'm just not sure what's wrong with this engine. Maybe it IS a rod bearing, but if it is.. that's a pretty tough bird to run for so long and put up with me refreshing my memory of clutches. I've stalled it probably a dozen times since I got it. It doesn't leave the yard unfortunately, no emissions so no tag.

ljustin293 · 04-03-2012, 08:43 AM

Quote:

Originally Posted by DarkFox1

the dealership in lithia springs?

A Tuesday seems like an odd day for a cruise in.

Yep! Bring your car out we would love to have you.

dianeokie · 04-03-2012, 09:57 AM

Quote:

Originally Posted by ljustin293

Yep! Bring your car out we would love to have you.

It's a nice day........I'm headed over just to cruise............4PM come on!

Brolik10 · 04-03-2012, 10:46 AM

Are TBSS's allowed at the cruise in, the Camaro is in the shop...

04-02-2012, 01:04 PM	#6162
hightower LS3 Black Widow Drives: 2012 45th 2SS LS3 and 1968 Mustang Join Date: Nov 2011 Location: Madison, GA Posts: 4,557	Well it ain't exactly a looker! But I've seen worse! 454 big block, 12 bolt rear end swap, GO! __________________ My Camaro Story

04-02-2012, 08:21 PM	#6164
csjcsj Drives: 2010 Camaro SS/RS 6spd Join Date: Sep 2009 Location: Jefferson, Ga Posts: 4,399 View My Garage	Looks easy, but how difficult is it to take a valve cover off???? Wanna maybe check to see if anything is loose with my ticking going on! Will I have to get a new gasket is my main thing!?????!!! __________________

04-02-2012, 08:41 PM	#6166
csjcsj Drives: 2010 Camaro SS/RS 6spd Join Date: Sep 2009 Location: Jefferson, Ga Posts: 4,399 View My Garage	20,000 roughly! __________________

04-03-2012, 07:07 AM	#6168
csjcsj Drives: 2010 Camaro SS/RS 6spd Join Date: Sep 2009 Location: Jefferson, Ga Posts: 4,399 View My Garage	Them are some FUGLY rims! Ewww! __________________

04-03-2012, 10:46 AM	#6174
Brolik10 BLOWN!!! Drives: 2010 RJT 2SS Join Date: Apr 2010 Location: Gwinnett, GA Posts: 1,103 View My Garage	Are TBSS's allowed at the cruise in, the Camaro is in the shop... __________________ Blown! Full Bolt-ons!

04-02-2012, 12:59 PM	#6161
DarkFox1 Drives: 2012 2SS A6 Join Date: Mar 2012 Location: Douglasville GA Posts: 647	Here's a photo for the bored.

04-02-2012, 01:06 PM	#6163
DarkFox1 Drives: 2012 2SS A6 Join Date: Mar 2012 Location: Douglasville GA Posts: 647	I got a built LQ4.. should be able to drop 400-450whp to the tires ready for a hood to go under (in a few weeks maybe..) But the v6-->v8 conversion aint pretty in these cars. That stack of tires in the background are factory snowflake 16s that SHOULD have come on this car. Those ugly black rims are steel and they're scuffed up pretty bad.

04-03-2012, 07:28 AM	#6169
ljustin293 Drives: 2010 VR CAMARO 2SS/RS Join Date: Aug 2008 Location: GA Posts: 15,060 View My Garage	We are working hard all ready for the John Thornton Chevrolet Cruise-in tonight. I hope to see some of y'all there!

04-03-2012, 07:58 AM	#6170
DarkFox1 Drives: 2012 2SS A6 Join Date: Mar 2012 Location: Douglasville GA Posts: 647	the dealership in lithia springs? A Tuesday seems like an odd day for a cruise in.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does Anyone Use a Club?	PercyJWellingtonIII	5th Gen Camaro SS LS LT General Discussions	51	12-31-2011 08:05 AM
CAJUN CAMARO CLUB/ Meeting to formalize our club	GATORJAK	USA - Southcentral	124	03-20-2011 08:22 PM
In the process of starting a new Camaro Club this year!	Blue Maro Demon	USA - Southeast	0	01-23-2011 11:51 PM
Eastern TN 5th GEN Camaro Club	304hp?	USA - Southeast	0	02-04-2010 03:11 AM
Club Day at Speedworld in January on a Sunday	chellzers	USA - Southwest	0	01-03-2010 04:39 PM