02-09-2015, 03:48 PM | #1 |
Drives: 2013 ZL1 Convertible Join Date: Oct 2013
Location: Valrico, FL
Posts: 515
|
Who makes KB BAP kit for our cars?
I recall seeing a post some time ago that mentioned a company that had a KB Boost-A-Pump kit for our cars which included a mount, etc. Anybody know who that is?
__________________
2013 ZL1 Auto Convertible - BRM
Best: 10.829@127.15 FI Interchiller, Roto-Fab CAI, Big Gulp & Res, 9.1/2.5 Pulleys, PB&S, DeatschWerks 1500cc, Fore triple pump, Pfadt LT's, RD HX, MT DR's New times to come with E85 2016 2SS Auto - Hyper Blue Metallic Roto-Fab CAI |
02-09-2015, 07:36 PM | #2 |
Drives: 2013 ZL1 A6 Camaro, 2015 C7 A6 Z51 Join Date: Apr 2014
Location: Oklahoma
Posts: 396
|
I bought mine from Lingenfelter. I got the 40 amp version.
__________________
Roto-Fab CAI, Texas Speed Headers, Texas Speed X-Pipe, Texas Speed LS3-B Blower Cam, Metco 9.10" Crank Pulley, Metco 2.5 Upper Pulley, ID 850 Injectors, LPE Ported Throttle Body, Alky Control Methanol kit, E2 Catch Can, 610HP / 608 Torque.
|
02-09-2015, 11:02 PM | #3 |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
__________________
Bryan 2018 ZL1 M6
|
02-09-2015, 11:08 PM | #4 |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
__________________
Bryan 2018 ZL1 M6
|
02-10-2015, 09:16 AM | #5 |
Drives: 2013 ZL1 Convertible Join Date: Oct 2013
Location: Valrico, FL
Posts: 515
|
Thanks Bryan,
Are you running the KB BAP? If so, did you hardwire it for full voltage or are you using the knob?
__________________
2013 ZL1 Auto Convertible - BRM
Best: 10.829@127.15 FI Interchiller, Roto-Fab CAI, Big Gulp & Res, 9.1/2.5 Pulleys, PB&S, DeatschWerks 1500cc, Fore triple pump, Pfadt LT's, RD HX, MT DR's New times to come with E85 2016 2SS Auto - Hyper Blue Metallic Roto-Fab CAI |
02-10-2015, 12:17 PM | #6 |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
Yes this is the one I'm running. I wired it with the knob. It is mounted hidden up under the rear deck inside the trunk. But it's cranked all the way up.
__________________
Bryan 2018 ZL1 M6
|
02-10-2015, 07:08 PM | #7 |
Drives: 2013 ZL1 A6 Camaro, 2015 C7 A6 Z51 Join Date: Apr 2014
Location: Oklahoma
Posts: 396
|
mine is set up to come on with boost...initally when they installed it, it had an inline fuse that was throwing the voltage off and it was showing 80lbs. of pressure at idle. They rewired it and now it is making 50 at idle and holding strong at 65 on boost.
__________________
Roto-Fab CAI, Texas Speed Headers, Texas Speed X-Pipe, Texas Speed LS3-B Blower Cam, Metco 9.10" Crank Pulley, Metco 2.5 Upper Pulley, ID 850 Injectors, LPE Ported Throttle Body, Alky Control Methanol kit, E2 Catch Can, 610HP / 608 Torque.
|
|
|
|
|