You are browsing camaro5 
 |
|
01-12-2024, 11:04 PM
|
#1 |
 Drives: Camaro SS Join Date: Dec 2020
Location: US
Posts: 4
|
FE3 to 1LE Rear Sway Bar Conversion
Hey all. To give you a little background I've had my camaro 2ss rs for 3 years now. I got it lightly modified. Suspension wise it has H&R lowering springs and I just got new tires F:20/40/265 and R:20/40/295.The car handles better with the wider tires, but I still feel a lot of body roll.
I did some research and it seems like converting the FE3 to FE4 is the way to go for a big improvement. I also heard that getting just the rear 1le / zl1 sway bar with the stock ss front is a pretty good setup (F:23mm / R:28mm). Would anyone know all the parts needed to run the rear 1le sway bar? Part numbers would be awesome too. From what I can gather I need: - FE4 rear lower control arm - FE4 rear drop links - 1le rear sway bar Anything I'm missing? Thanks in advance! |
|
|
|
01-13-2024, 02:17 PM
|
#2 |
  
Drives: 2014 Camaro SS/RS 1LE 1967 Camaro Join Date: Oct 2013
Location: Fort Wayne, IN
Posts: 874
|
That’s all that is required. You need the lower control arm because the end links mount further outboard. Nothing else changes. I had to remove mine to install a 15 inch conversion with BMRs extreme sway bar, that’s how I know.
|
|
|
|
|
01-17-2024, 10:44 AM
|
#3 |
|
Drives: Camaro SS Join Date: Dec 2020
Location: US
Posts: 4
|
thank you! Appreciate the confirmation
|
|
|
|
|
01-17-2024, 11:03 AM
|
#4 |
     Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017
Location: Huntsville, AL
Posts: 2,155
|
Does the OEM bar come with new mounts or is that a separate part #. The aftermarket bars typically come with new mounts but I'm not sure about OEM.
|
|
|
|
|
01-18-2024, 08:49 AM
|
#5 |
 
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,736
|
OEM bars have the mounts on them, but you do have to order the links to the LCA.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
|
|
|
|
01-19-2024, 07:51 AM
|
#6 |
|
BMR TCA028 or similar has provisions for both. 1st pic used BMR bar and inboard mount. 2nd pic is when I changed to outboard mount with a JPSS sway.
|
|
|
|
|
|
|
|
 |
|
|
