What's this MP2300 plus exhaust worth - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Riderover40 · 11-17-2010, 12:53 PM

I might remove my Supercharger set up in order to trade in. I am not familiar with pricing the complete kit
MP2300 Magnacharger Supercharger
Roto Fab cai
Kooks SS 1-7/8 LT headers
Kooks SS high flow catted extensions
Corsa SS Performance Exhaust

How much should I ask without breaking it up?

jsharp · 11-17-2010, 03:38 PM

6700+ actual shipping I think would be a good deal for someone to buy it all. And depending on who install and who you purchased the kit from it may have a minor few things that someone else may not want for their build but unlikely.

Reason:
5k for maggie because its used and will likely cost someone 1200+tune to install which for 6500-7k they can get a new one installed.
Rotofab about 150 I mean its a cai so resale prob not gonna be that good on used one
Kooks headers and cats 700 as I have seen them sell used for this or lower shiped with less than 3k on them
And corsa about 800 as its 1100 or so new if your a good shopper and being once again its used.
And I would add shipping to the package per zip code and not include it in price.

blazzin1 · 11-17-2010, 06:12 PM

I think you'd have better luck if you split things up. Very few people will want the exact same set up you had, but I'm sure just about everyone would like at least something out of that group!!! Let me know when you decide on a price for the headers and cats!
And pictures will ALWAYS help to sell.

sportyb24 · 11-17-2010, 09:29 PM

id be interested in the header setup minus the corsa.. pm me a price

jsharp · 11-17-2010, 09:48 PM

Yeh all of this could be sold seperate easy and you could probably add more to each piece price wise that way to!

TX Pony Killer · 11-18-2010, 01:40 PM

PM a price on the headers and cats. I'd be interested in those...

dukefanok · 11-18-2010, 01:41 PM

I'd be interested in the Corsa if the price was right. Shoot me a PM for that if you decide to break this package up.

Brent_$$ · 11-18-2010, 07:16 PM

Man it would prob be better to try and sell the car with all the upgrades instead of trading it in. Have you tried to go that route? just saying after putting my maggie,long tubes, and exhaust in myself i would hate to have to spend the time and energy to take it out.

jsharp · 11-18-2010, 09:03 PM

He would be lucky to get what he paid for the car stock even with mods. People are scared of what the car has been through since mods and some would prefer to buy a brand new stock one so if you mark it near that price plus it has mods its worth it for people to buy. Simple fact is mods just dont make you anything for trades or selling out right I think selling it all seperatly is the best idea!

2010victoryredss_ron · 11-18-2010, 10:19 PM

what are you trading it in on???

MyOrangeSS · 04-20-2011, 03:08 PM

Im interested in the supercharger, could you PM me a price?

11-17-2010, 12:53 PM	#1
Riderover40 Drives: 2010 ABM Camaro 2SS LS3 w/RS Join Date: Mar 2009 Location: London, Ontario Posts: 648 View My Garage	What's this MP2300 plus exhaust worth I might remove my Supercharger set up in order to trade in. I am not familiar with pricing the complete kit MP2300 Magnacharger Supercharger Roto Fab cai Kooks SS 1-7/8 LT headers Kooks SS high flow catted extensions Corsa SS Performance Exhaust How much should I ask without breaking it up? __________________ Roto Fab CAI, Magnacharger MP2300, Kooks HO SS 1-7/8" LT's, Kook's Catted Connectors, Corsa SS Dual Rear Exit Cat-Back for A6 with Lasered Livernois Signature 4" Dual Wall Exit Pipes, Barton Short Throw. 546 RWHP 517 RWT This Car Rocks !! "Bring It On" GT-500

11-17-2010, 03:38 PM	#2
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	6700+ actual shipping I think would be a good deal for someone to buy it all. And depending on who install and who you purchased the kit from it may have a minor few things that someone else may not want for their build but unlikely. Reason: 5k for maggie because its used and will likely cost someone 1200+tune to install which for 6500-7k they can get a new one installed. Rotofab about 150 I mean its a cai so resale prob not gonna be that good on used one Kooks headers and cats 700 as I have seen them sell used for this or lower shiped with less than 3k on them And corsa about 800 as its 1100 or so new if your a good shopper and being once again its used. And I would add shipping to the package per zip code and not include it in price. __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

11-17-2010, 09:29 PM	#4
sportyb24 Romanian Outlaw Drives: 13 ZL1 , 14 Silverado Crew Cab Join Date: Apr 2010 Location: Texas Baby Posts: 1,082	id be interested in the header setup minus the corsa.. pm me a price __________________ [/SIGPIC]2013 Camaro ZL1 M6

11-17-2010, 09:48 PM	#5
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Yeh all of this could be sold seperate easy and you could probably add more to each piece price wise that way to! __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

11-18-2010, 01:40 PM	#6
TX Pony Killer Drives: 2011 2SS RS LS3 RJT Join Date: Sep 2009 Location: Houston, TX Posts: 145	PM a price on the headers and cats. I'd be interested in those... __________________ Done: MTI Short Shifter, K&N Typhoon CAI, RX Catch Can, Corsa cat-back, BMR Trailing Arms, VMax Ported TB, Kooks 1 7/8" LT headers w/HF cats, Jannetty Tune *412 RWHP/406 RWT*

11-17-2010, 06:12 PM	#3
blazzin1 Drives: 2010 2SS/RS R6P Join Date: Nov 2008 Location: St. Cloud, FL Posts: 4,845 View My Garage	I think you'd have better luck if you split things up. Very few people will want the exact same set up you had, but I'm sure just about everyone would like at least something out of that group!!! Let me know when you decide on a price for the headers and cats! And pictures will ALWAYS help to sell.

11-18-2010, 01:41 PM	#7
dukefanok Drives: 2011 Camaro 2SS/RS Black on Black Join Date: Aug 2010 Location: Oklahoma Posts: 54	I'd be interested in the Corsa if the price was right. Shoot me a PM for that if you decide to break this package up.

11-18-2010, 07:16 PM	#8
Brent_$$ Warp drive in development Drives: 2010 Camaro 2SS (Becca Bumble Bee) Join Date: Oct 2010 Location: Valdosta, GA Posts: 57 View My Garage	Man it would prob be better to try and sell the car with all the upgrades instead of trading it in. Have you tried to go that route? just saying after putting my maggie,long tubes, and exhaust in myself i would hate to have to spend the time and energy to take it out.

11-18-2010, 09:03 PM	#9
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	He would be lucky to get what he paid for the car stock even with mods. People are scared of what the car has been through since mods and some would prefer to buy a brand new stock one so if you mark it near that price plus it has mods its worth it for people to buy. Simple fact is mods just dont make you anything for trades or selling out right I think selling it all seperatly is the best idea! __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

11-18-2010, 10:19 PM	#10
2010victoryredss_ron Born: August 27, 2009 Drives: 10CAMARO SS,12CRUZE RS,07 YAM R6 Join Date: Aug 2009 Location: Waterloo, Ontario, Canada Posts: 866 View My Garage	what are you trading it in on??? __________________ Victory Red 2SS/RS Vin# A9130145

04-20-2011, 03:08 PM	#11
MyOrangeSS Drives: 2010 Camaro 2SS Join Date: Nov 2010 Location: Las Vegas Posts: 200 View My Garage	Im interested in the supercharger, could you PM me a price?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 1/4 Mile (V8) 2010+ Camaro Fast List	Merc	Dragstrip and Launch Techniques Discussion	3652	08-17-2023 02:50 PM
Thoughts before choosing a Borla Exhaust....	southerncarparts	V8 Bolt-Ons & Tunes	100	12-15-2022 02:45 AM
V8 Camaro Aftermarket Exhaust Video Clips Compilation	tjbusa	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	591	07-06-2022 08:38 AM
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 05:56 PM