05-21-2010, 02:24 PM | #1 |
Drives: 2010 1SS/RS Inferno Orange Join Date: Jun 2009
Location: East Ky
Posts: 704
|
Tail Light Removal
How hard is it to remove the 4 tail lights? And can you take the tail lights out WITH the chrome bezel still intact. I just got the lens tint and I'm sure I'd break the bezel's if I tried to get them off. I think I'd have a better shot at not breaking anything if I could just remove the tail lights, then take the bezel's off so I can see what I'm doing and apply the tint with them off. I may be easier that way, I'm not really sure.
If its just a few bolts, and a few electrical connectors I think I'll do it this way. Is there a guide, a video or anything like that, that shows how to remove them? Or should I just go slow with removing the bezels, and apply the tint with the lights still on the car? Thanks in advance!
__________________
|
05-21-2010, 03:06 PM | #2 |
Drives: 10 1LT SIM; 91 B4C sleeper Z Join Date: Aug 2009
Location: Ft. Mitchell, Alabama
Posts: 7,199
|
This video helps.
http://www.camaro5.com/forums/showth...t=bezel+remove You're going to have to remove the bezels to get the taillights out. Just go slow!!!
__________________
Pedders Pace Car Package, Injen CAI, Flowmaster AT, AAC Lighting, ZL1 fascia/skirts, RKSport Ram Air hood, vented fenders, painted stripes (Gary's Customz), Honor and Valor badged (Thank you, John)
|
05-21-2010, 03:36 PM | #3 |
Drives: 2010 1SS/RS Inferno Orange Join Date: Jun 2009
Location: East Ky
Posts: 704
|
No, I was hoping that I didn't have to take the bezel's off to get the tail lights off. But now that I see that's how you have to do it, I guess I'll just take the bezel's off then put the tint on that way.
Thanks
__________________
|
05-21-2010, 03:44 PM | #4 |
2SS RJT OWNER/OPERATOR
Drives: 2010 2SS LS3 RJT Join Date: Jan 2010
Location: Currently on the 3rd Rock. Temporarily
Posts: 540
|
Try this previous post. And you will have to remove the chrome bezels. Sorry... Link to follow:
http://www.camaro5.com/forums/showthread.php?t=65009 Hope that helped...
__________________
Fly low and Avoid the radar!
|
05-21-2010, 08:23 PM | #5 |
Drives: Company Car Join Date: Sep 2009
Location: headlightarmor.com
Posts: 3,535
|
If you are going to be installing our HeadlightArmor smoked taillight kit, it was designed to be installed with the bezels in place. Removing the bezels would likely make them harder to install. If you have something else, I would ask how they were intended to be put on.
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best back tail light tints? | RJT | Cosmetics and Lighting Modification Discussions | 9 | 03-12-2010 11:24 PM |
GTS tail light covers--tape behind tail lights visible? | zsuns | Cosmetics and Lighting Modification Discussions | 5 | 01-31-2010 12:55 AM |
How much light emits out of the black tail light covers? | zsuns | Cosmetics and Lighting Modification Discussions | 4 | 01-03-2010 11:39 AM |
Local 2009+ camaro needed for smoked tail light and head light fitting | dantegts | USA - California | 8 | 09-21-2009 09:29 PM |
Blacked out Head Light and Tail Light Covers available | Defenderworx | Cosmetics and Lighting Modification Discussions | 52 | 08-09-2009 08:47 PM |