Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
dave@hennessey
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 05-21-2018, 10:24 AM   #1
RealQuick
 
Drives: 2010 Camaro 2SS M6 - Intake/Exhaust
Join Date: Sep 2014
Location: Bridgewater
Posts: 693
RealQuick's New Build - 416 TT

After pulling my SBE LS3 to put in my GTO, and I just sold the Huron Single Kit, I am starting a new project for the Camaro.

here is the plan...

Engine:
TSP LS3 416ci (416CID, 58x K1 Crank, Compstar Rods, Wiseco 4.070 -15cc,
ARP Main Studs, Boosted)
10:1 SCR
AI280CC LS3 heads/BTR.660 Ti
LSE Ported intake and NW102 TB
235/231 .6XX/.6XX 115LSA (may change this, but worked really well on the single setup).
OE Lifters
LS3 rockers with Straub Trunnion upgrade
Melling Oil pump (hi volume)

Fuel: 93 octane
1000CC injectors
ZL1 Pump
ADM FPCM
Alky Control Dual Nozzle Kit (15+5) - May go up on the 2nd nozzle.

I made 817rwhp on 376ci at 60% DC when running meth, so there is a little more room, but it wont get me to 1000rwhp. I know I will need to change out the pump at some point, but for now I am gonna run it and just make whatever power I can while supplementing with meth.

Power Added:
Huron Twin Turbo Low mount
Precision 6266's T4 .81
PW46mm Gates
A2A FMIC
Turbosmart BOV
Turbowerx Exa Pump

Ignition:
Granatelli coils (already have them)
br8's
Wires TBD

Tranny:
Stock M6 tranny
Street Slayer Billet Twin
New Slave
Tick speed bleeder

Rear:
Stock for now
3.45 gears

DSS aluminum 1 piece driveshaft

Tires:
20x11
Nitto 305/35-20 NT05R
Didnt hook worth a shit with the single kit on low power, so I will be upgrading to something with a little more sidewall. I just dont want to have to ditch the rear stock brakes... so I think 17" wheel is the smallest I can go.

Obviously there are lots of things I should upgrade and build for strength (fuel system, tranny and rear), and as money comes I will do that. For now I need a new motor and turbo setup, so that is the focus first.

Last edited by RealQuick; 05-21-2018 at 10:58 AM.
RealQuick is offline   Reply With Quote
Old 05-21-2018, 10:27 AM   #2
RealQuick
 
Drives: 2010 Camaro 2SS M6 - Intake/Exhaust
Join Date: Sep 2014
Location: Bridgewater
Posts: 693
Quick Mockup of TT's on the SBE LS3 (going into the GTO).
Attached Images
     
RealQuick is offline   Reply With Quote
Old 05-21-2018, 10:30 AM   #3
RealQuick
 
Drives: 2010 Camaro 2SS M6 - Intake/Exhaust
Join Date: Sep 2014
Location: Bridgewater
Posts: 693
Assembly of engine.
Attached Images
          
RealQuick is offline   Reply With Quote
Old 05-21-2018, 10:32 AM   #4
RealQuick
 
Drives: 2010 Camaro 2SS M6 - Intake/Exhaust
Join Date: Sep 2014
Location: Bridgewater
Posts: 693
more...
Attached Images
         
RealQuick is offline   Reply With Quote
Old 05-21-2018, 10:37 AM   #5
RealQuick
 
Drives: 2010 Camaro 2SS M6 - Intake/Exhaust
Join Date: Sep 2014
Location: Bridgewater
Posts: 693
Cleaned up the pre made oil lines to shorter length.
Attached Images
          
RealQuick is offline   Reply With Quote
Old 05-21-2018, 10:38 AM   #6
RealQuick
 
Drives: 2010 Camaro 2SS M6 - Intake/Exhaust
Join Date: Sep 2014
Location: Bridgewater
Posts: 693
more....
Attached Images
     
RealQuick is offline   Reply With Quote
Old 05-21-2018, 12:58 PM   #7
Taylortoons
 
Taylortoons's Avatar
 
Drives: 2011 2SS/RS LS3
Join Date: Apr 2017
Location: Dallas
Posts: 482
Great build! Sure that ZL1 pump is going to be enough?
__________________
GPI Built Procharger D-1/13 PSI/Race Intercooler/SS3 Cam Kit/Kooks LTH/X- pipe/FIC 1050/E85/3.91 gears/Centerforce Dual Disc clutch/Flowmaster Outlaw/775whp/680tqSOLD
Taylortoons is offline   Reply With Quote
Old 05-21-2018, 02:09 PM   #8
BiggFoot

 
BiggFoot's Avatar
 
Drives: 2010 Camaro (M6) 1000+ HP SBE
Join Date: Jun 2011
Location: Houston
Posts: 1,391
Wowwwwzers, look at all that cheddar!! Pure engine eye candy!!!

Cant wait to see how all this turns out.
__________________
F-1X, Cog Drive, ATI Super Pulley/Sprag ~ 19 psi
Blower Cam
Brodix BP BR 3 Heads
Kooks LT Headers and full 3" exhaust
Fore Triple Pump Fuel System with ID 1700X Injectors - E85 conversion

DSS 9” Conversion (1400 hp axles, driveshaft, pumpkin) & Strange 3.70 gears
McLeod RXT Twin HD Clutch & Upgraded Slave
RPM Level VII
TR6060
BMR Drag Suspension Package w/Strange shocks
Carlyle 15" and M/T ET Street R radials
10.1 @ 143 mph 1/4 mile


BiggFoot is offline   Reply With Quote
Old 05-21-2018, 02:21 PM   #9
Huron Speed
 
Drives: 2012 45th SS
Join Date: Sep 2010
Location: Michigan
Posts: 689
Looking great! Thanks again for the continued support!
Huron Speed is offline   Reply With Quote
Old 05-21-2018, 02:41 PM   #10
Cool AirZ28
 
Cool AirZ28's Avatar
 
Drives: 2013 Black Camaro 2SS/RS Convert.
Join Date: Jun 2013
Location: Sauk Village, Illinois
Posts: 506
Ditch the ZL1 pump and get at least twin or triple pumps. Are you considering going E85 conversion? Just thinking you want to maximize that pretty motor you got
__________________
2013 Camaro 2SS/RS-Smoked tail lights and side markers, HID log lights, & LED lighting inside/outside the car, SJM LED Cupholder, SJM full dashboard ABL lighting, ZL1 Rockers, 1LE Splitter, Showstopper LED Mirrors, Showstopper LED Side Markers, & Showstopper Heat Extractor Hood, 20" Niche Concourse ZL1 Styled wheels 20X8.5 & 20X10 with 275/40/20 & 315/35/20 Nitto Invos, Black Gorilla Lug Nuts/Locks, Black Billet Elite Camaro License Plate Holder, and Hydro Dipped Speedo/Shifter/AC-Heat Bezels.
Cool AirZ28 is offline   Reply With Quote
Old 05-21-2018, 02:49 PM   #11
NoDakZ/28
 
NoDakZ/28's Avatar
 
Drives: 2014 Z/28 CTF
Join Date: Sep 2017
Location: North Dakota
Posts: 597
Great turbo choice. I love mine!
__________________
2014 1LE - Sold
2014 Z/28 #99008 CTF SIM
NoDakZ/28 is offline   Reply With Quote
Old 05-21-2018, 02:56 PM   #12
BiggFoot

 
BiggFoot's Avatar
 
Drives: 2010 Camaro (M6) 1000+ HP SBE
Join Date: Jun 2011
Location: Houston
Posts: 1,391
Quote:
Originally Posted by RealQuick View Post
Obviously there are lots of things I should upgrade and build for strength (fuel system, tranny and rear), and as money comes I will do that. For now I need a new motor and turbo setup, so that is the focus first.
Op knows he has additional supporting mods coming in the future. Sometimes you have to pick and choose what you do when. He will get there . . . Let's cut him some slack
__________________
F-1X, Cog Drive, ATI Super Pulley/Sprag ~ 19 psi
Blower Cam
Brodix BP BR 3 Heads
Kooks LT Headers and full 3" exhaust
Fore Triple Pump Fuel System with ID 1700X Injectors - E85 conversion

DSS 9” Conversion (1400 hp axles, driveshaft, pumpkin) & Strange 3.70 gears
McLeod RXT Twin HD Clutch & Upgraded Slave
RPM Level VII
TR6060
BMR Drag Suspension Package w/Strange shocks
Carlyle 15" and M/T ET Street R radials
10.1 @ 143 mph 1/4 mile


BiggFoot is offline   Reply With Quote
Old 05-21-2018, 03:41 PM   #13
Punisher_ATX
 
Drives: 2010 SS
Join Date: Jun 2015
Location: Austin
Posts: 439
If it is of any interest id sell my vaporworx dual 450 setup for a good bit less than i paid for it. Im most likely going to switch to a fuel cell in my car.

Its a vaporworx PWM controller and fore dual 450 pump setup for 1000hp on e85 returnless. Brand new never installed.
Punisher_ATX is offline   Reply With Quote
Old 05-21-2018, 06:18 PM   #14
RealQuick
 
Drives: 2010 Camaro 2SS M6 - Intake/Exhaust
Join Date: Sep 2014
Location: Bridgewater
Posts: 693
Thanks for the words guys, I appreciate it. Yeah, fuel system in the future for sure. Punisher, shoot me a pm with details and price.
RealQuick is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:37 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.