11-21-2020, 01:17 PM | #1 |
Drives: 2016 SS, BLACK, MANUAL Join Date: Apr 2010
Location: pittsburgh, pa
Posts: 277
|
275/40/20 tires on 9" rims on front end
Has anybody run 245/40/20" on 9" wide stock rims on the front of a 2012 Camaro????
__________________
2016 Black/Black SS, 6speed, MRC, Roto-Fab air intake, Vitesse controller,
1 7/8" headers and exhaust from Stainless Works complete with nonNPP mufflers and 5"outlets, Katech ported TB, Moroso catch can, MRR M017 polished powder wheels, Eibach lowering springs, and BMR upper/ lower trailing arms and upper control arms. ZL1/1le sway bars and Magnusson Supercharger with Jannetty tune. Stay Tuned!!!......More to come. 2014 Camaro Ashen grey, 3.6, 6 speed, Vararam intake, Elite catch can, chrome wheels, and Vitesse controller. 2003 SSR red, 2016 Vette |
11-21-2020, 02:51 PM | #2 | |
Drives: 2014 Ashen Gray Convertible Join Date: Apr 2017
Location: Havelock, NC
Posts: 1,329
|
Quote:
First: Will the 245/40/20 tires fit on a 20"X9" wheel? Yes they will fit perfectly. The minimum size you would want on a 20" wheel is 235, ideal would be 245 or 255, amazingly Chevrolet has mounted 275/40/20 tires on 9" wheels Secondly: Will 245/40/20 tires mounted on 20"X9" wheels fit on the front of the Camaro? Yes they will. Currently I am running two different "Square" setups on my 2014 Camaro. 1. 20"X8.5" OEM 2019 wheels, tires are 245/40/20, as I stated this is a square setup, same size on all four corners. 2. 20"X10" ZL1 Replica wheels, tires are 275/35/20, again, same size tires on all four corners. Snug but they fit well with no issues what so ever. Hope this answered your question. Larry
__________________
|
|
11-22-2020, 07:22 AM | #3 |
Master of All Things
Drives: '20 Corvette Stingray Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 22,292
|
and yet a different square set up that a lot of people run, myself included, is to run the rear stock wheels/tires on all four corners. 275/40/20's on 20x9 stock wheels all the way around.
__________________
|
11-22-2020, 09:24 AM | #4 |
Drives: 2016 SS, BLACK, MANUAL Join Date: Apr 2010
Location: pittsburgh, pa
Posts: 277
|
This is what I am going to do on my recently purchased 2012 Camaro, 275/40/20 on 9" wide stock wheels on all 4 corners.
__________________
2016 Black/Black SS, 6speed, MRC, Roto-Fab air intake, Vitesse controller,
1 7/8" headers and exhaust from Stainless Works complete with nonNPP mufflers and 5"outlets, Katech ported TB, Moroso catch can, MRR M017 polished powder wheels, Eibach lowering springs, and BMR upper/ lower trailing arms and upper control arms. ZL1/1le sway bars and Magnusson Supercharger with Jannetty tune. Stay Tuned!!!......More to come. 2014 Camaro Ashen grey, 3.6, 6 speed, Vararam intake, Elite catch can, chrome wheels, and Vitesse controller. 2003 SSR red, 2016 Vette |
11-22-2020, 09:33 AM | #5 |
|
Search function here is very good if used. Several of us 10 years ago did this by purchasing a set rear wheels and tires and running them on the front. Took most of the factory understeer out of car with no other mods.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
|
|
|
Thread Tools | |
|
|