11-04-2016, 08:06 PM | #1 |
Drives: 2016 SS, BLACK, MANUAL Join Date: Apr 2010
Location: pittsburgh, pa
Posts: 277
|
brake caliper torque spec
Anybody know what the torque is for the front and rear brake calipers? Thanks in advance.
__________________
2016 Black/Black SS, 6speed, MRC, Roto-Fab air intake, Vitesse controller,
1 7/8" headers and exhaust from Stainless Works complete with nonNPP mufflers and 5"outlets, Katech ported TB, Moroso catch can, MRR M017 polished powder wheels, Eibach lowering springs, and BMR upper/ lower trailing arms and upper control arms. ZL1/1le sway bars and Magnusson Supercharger with Jannetty tune. Stay Tuned!!!......More to come. 2014 Camaro Ashen grey, 3.6, 6 speed, Vararam intake, Elite catch can, chrome wheels, and Vitesse controller. 2003 SSR red, 2016 Vette |
11-04-2016, 08:18 PM | #2 |
|
Fronts are 30 foot pounds plus 90 degrees.... If they are the same as the 5th Gen. I looked but couldn't find the specs for ours.
__________________
2016 2SS 6-Speed Manual... Magnetic Ride Control, Dual Mode Exhaust, Sunroof, Adrenaline Red Interior, Mylink W/Navigation
Added Edelbrock E-Force Supercharger, GM 1LE Sway Bars, BMR Upper/Lower Trailing Arms, BMR Upper Control Arms. BMR Front/Rear Chassis Braces, BMR Tunnel Brace. GM Red knee Pads, GM Black Front Splitter, GM SEMA Concept Grille, GM Dark Taillights, GM Ground Effects package... Savini Di Forza BM-14 Gloss Black Wheels 9's front, 10's rear. |
11-05-2016, 08:52 AM | #3 |
Drives: 2016 SS, BLACK, MANUAL Join Date: Apr 2010
Location: pittsburgh, pa
Posts: 277
|
I am looking for the torque required to mount the caliper to the spindle .......I thought I read some where that it was 148ft. lbs. plus 88-92 degrees?????
__________________
2016 Black/Black SS, 6speed, MRC, Roto-Fab air intake, Vitesse controller,
1 7/8" headers and exhaust from Stainless Works complete with nonNPP mufflers and 5"outlets, Katech ported TB, Moroso catch can, MRR M017 polished powder wheels, Eibach lowering springs, and BMR upper/ lower trailing arms and upper control arms. ZL1/1le sway bars and Magnusson Supercharger with Jannetty tune. Stay Tuned!!!......More to come. 2014 Camaro Ashen grey, 3.6, 6 speed, Vararam intake, Elite catch can, chrome wheels, and Vitesse controller. 2003 SSR red, 2016 Vette |
11-05-2016, 10:00 AM | #4 |
|
Nope... Caliper to knuckle, 30 plus 90 deg.
__________________
2016 2SS 6-Speed Manual... Magnetic Ride Control, Dual Mode Exhaust, Sunroof, Adrenaline Red Interior, Mylink W/Navigation
Added Edelbrock E-Force Supercharger, GM 1LE Sway Bars, BMR Upper/Lower Trailing Arms, BMR Upper Control Arms. BMR Front/Rear Chassis Braces, BMR Tunnel Brace. GM Red knee Pads, GM Black Front Splitter, GM SEMA Concept Grille, GM Dark Taillights, GM Ground Effects package... Savini Di Forza BM-14 Gloss Black Wheels 9's front, 10's rear. |
11-06-2016, 12:51 PM | #5 | |
Drives: Summit White 2016 2SS Join Date: Jan 2015
Location: Mont Belvieu Tx
Posts: 712
|
Quote:
Gary, you are correct for the fronts. 148lb/ft
__________________
2015 1LE sold
2016 2SS sold |
|
11-06-2016, 04:55 PM | #6 |
Drives: Nightfall, 2SS, A8, MRC, NPP,RE-71R Join Date: Jul 2016
Location: United States
Posts: 250
|
The flyer for the brake duct kit from GM says 148 lbs. I installed them today. It wasn't easy to get a good angle on the bolt to hit the 148lbs. 148 seems like alot of force, but thats what the flyer says.
|
11-07-2016, 07:48 AM | #7 | |
Drives: 2016 1SS Join Date: Jan 2016
Location: DC
Posts: 927
|
Quote:
The rear (4 pistons) is about 90 lb. ft. not 148 as well.....ask me how I know...
__________________
1SS, Black, Black Wheels, A8, MRC, NPP
|
|
11-08-2016, 07:49 AM | #8 |
Drives: 2016 SS, BLACK, MANUAL Join Date: Apr 2010
Location: pittsburgh, pa
Posts: 277
|
Thanks Locktyght, NCSD, and Mbar for the correct info. It really pi$$es me off that the 2016 Camaro service manuals will not be out until 12/12/2016.
__________________
2016 Black/Black SS, 6speed, MRC, Roto-Fab air intake, Vitesse controller,
1 7/8" headers and exhaust from Stainless Works complete with nonNPP mufflers and 5"outlets, Katech ported TB, Moroso catch can, MRR M017 polished powder wheels, Eibach lowering springs, and BMR upper/ lower trailing arms and upper control arms. ZL1/1le sway bars and Magnusson Supercharger with Jannetty tune. Stay Tuned!!!......More to come. 2014 Camaro Ashen grey, 3.6, 6 speed, Vararam intake, Elite catch can, chrome wheels, and Vitesse controller. 2003 SSR red, 2016 Vette |
|
|
Post Reply
|
Thread Tools | |
|
|