Tubular K members are here - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

OrangeChevyII · 03-07-2010, 11:02 AM

Check out this tubular K member from Extreme Innovations and Fabrications in Luxemberg Wisconsin. All Chrome Molly and tig welded for lightweight and bolt in installation. Mine shall be arriving in the next couple of weeks, damn I cant wait to get it. Another 30 pounds off this pig will put her tipping the scales at 3790 pounds with me in it!!!!!!

www.extremeinnovationsandfabrication.com

woodside783 · 09-20-2012, 12:48 PM

How has this held up so far

jrpxxii · 09-20-2012, 07:13 PM

Quote:

Originally Posted by woodside783

How has this held up so far

Ive had one in my car for awhile and is an incredible piece and Im throwing 1400rwhp with it. Craig at Xtreme built my cage and did all of my suspension and his products are first class.

Unobtainium · 01-14-2013, 02:21 PM

Quote:

Originally Posted by jrpxxii

Ive had one in my car for awhile and is an incredible piece and Im throwing 1400rwhp with it. Craig at Xtreme built my cage and did all of my suspension and his products are first class.

Does anybody have installed pics or ones of it beside the factory deal?
Just trying to gauge the space savings of it....the weight is good.

429 · 01-14-2013, 03:35 PM

Its an amazing piece, but not for that coin. Can't wait for BMR/etc to step up and mass produce one.

jrpxxii · 01-15-2013, 04:05 PM

Quote:

Originally Posted by Unobtainium

Does anybody have installed pics or ones of it beside the factory deal?
Just trying to gauge the space savings of it....the weight is good.

It is incredible the difference it makes as there is tons of room to reach anything under the car now and its saves you weight

Chevrolade · 12-01-2013, 10:34 PM

Very nice I may just order one since no one else offers.

Bo White · 12-02-2013, 06:39 AM

They should have made the rear cross over a bolt in piece for oil pan removal in chassis.

62nalide · 12-02-2013, 11:46 AM

Damn, so no one else makes them?

Chevrolade · 12-02-2013, 11:50 PM

Don't think so bro
I'm gonna call BMR tomorrow and see if they have anything in process

Synner · 12-03-2013, 08:28 AM

BMR hasn't started anything. No other options yet.

Unobtainium · 12-05-2013, 12:14 AM

I wonder how much stiffer the factory piece is...
Most wouldn't care, but just curious if any road racers own this?

Synner · 12-05-2013, 08:07 PM

Quote:

Originally Posted by Unobtainium

I wonder how much stiffer the factory piece is...
Most wouldn't care, but just curious if any road racers own this?

I'm too poor. But if someone comes out with a more affordable option and I got it then I would likely order it raw and add a number of gussets at all major connection points and possibly some additional bracing to be on the safe side.

Nathan's build is the first road race use I've seen, if he could only stop messing with it and get it together we could get an opinion. But he's also added a cage that would remove any direct comparison info on structural rigidity.

While not a direct comparison here is a pic of a UMI tubular k member for a 93-97 Camaro, standard version and road race version. Quite a difference.

http://umiperformance.com/catalog/in...6jfqtoue54cdq7

http://umiperformance.com/catalog/in...6jfqtoue54cdq7

Pro Stock John · 12-06-2013, 01:15 PM

Anyone know where I could get a stock k-member? If I could get one cheap, I could send to a good chassis place I know and ask him to make them for us. We've talked about it and I bet he'd be a good price point. PM if have a k member I could use.

03-07-2010, 11:02 AM	#1
OrangeChevyII Drives: 2010 RS/SS2 Join Date: Jul 2009 Location: Forney Posts: 724	Tubular K members are here Check out this tubular K member from Extreme Innovations and Fabrications in Luxemberg Wisconsin. All Chrome Molly and tig welded for lightweight and bolt in installation. Mine shall be arriving in the next couple of weeks, damn I cant wait to get it. Another 30 pounds off this pig will put her tipping the scales at 3790 pounds with me in it!!!!!! www.extremeinnovationsandfabrication.com __________________ 2010 SS/RS SIM First to run 11's (11.83)on a stock long block. First to run 11's cam only First to run 11's all motor First to run 10's (10.96) and did it with a 100% bonestock long block and a power adder (nitrous) First to run 10's (10.55) on motor in 2010 Camaro First to break into the 5's (5.97) 1/8th mile First to cut a 1.5X sixty foot First to cut a 1.4x sixty foot First to car to cut a 1.3x 60ft

09-20-2012, 12:48 PM	#2
woodside783 Casey Woodside Drives: a very fun car Join Date: Jun 2010 Location: Tn Posts: 1,906	How has this held up so far __________________ Instagram @caseywoodside http://youtu.be/CSc9aPh_X_w

12-02-2013, 06:39 AM	#8
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,018	They should have made the rear cross over a bolt in piece for oil pan removal in chassis. __________________ Retired wanna be cylinder head porter 2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

12-02-2013, 11:46 AM	#9
62nalide Drives: 2013 SS Join Date: May 2013 Location: DFW Posts: 4,102	Damn, so no one else makes them? __________________ https://frankensteined.net/ Martin@Frankensteined.net

12-05-2013, 12:14 AM	#12
Unobtainium Fabricator Drives: 2011 2SS Summit White Join Date: Jun 2011 Location: Langdon, AB Posts: 505	I wonder how much stiffer the factory piece is... Most wouldn't care, but just curious if any road racers own this? __________________ Roto-fab CAI Unobtainium Welding Exhaust ARH LT's 393whp L99 GPI VVT Turbo Cam-in

01-14-2013, 03:35 PM	#5
429 Account Suspended Drives: 2010 camaro ss Join Date: Nov 2012 Location: Richmond Hill, GA Posts: 726	Its an amazing piece, but not for that coin. Can't wait for BMR/etc to step up and mass produce one.

12-01-2013, 10:34 PM	#7
Chevrolade Account Suspended Drives: 2010 2SS/RS Join Date: Jan 2013 Location: Texas Posts: 1,050	Very nice I may just order one since no one else offers.

12-02-2013, 11:50 PM	#10
Chevrolade Account Suspended Drives: 2010 2SS/RS Join Date: Jan 2013 Location: Texas Posts: 1,050	Don't think so bro I'm gonna call BMR tomorrow and see if they have anything in process

12-03-2013, 08:28 AM	#11
Synner Drives: cars Join Date: May 2011 Location: Oversneeze Posts: 4,545	BMR hasn't started anything. No other options yet.

12-06-2013, 01:15 PM	#14
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	Anyone know where I could get a stock k-member? If I could get one cheap, I could send to a good chassis place I know and ask him to make them for us. We've talked about it and I bet he'd be a good price point. PM if have a k member I could use. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Properautocare Coupon Sale for Camaro5 Members	Angelo@Autopia	Wash/Wax/Detailing and Cosmetic Maintenance Parts	2	12-11-2009 09:38 AM
LM Performance, Spohn Camaro 2010 Tubular Rear Trailing Arms w/ Spherical Rod Ends	LMPerformance	V8 Bolt-Ons & Tunes	0	10-19-2009 01:59 PM
LMPerformance, Spohn Camaro 2010 Tubular Rear Toe Links with Polyurethane Bushings.	LMPerformance	V8 Bolt-Ons & Tunes	0	10-19-2009 01:55 PM
LM Performance, Spohn Camaro 2010 Tubular Rear Toe Links with Spherical Rod Ends.	LMPerformance	V8 Bolt-Ons & Tunes	0	10-19-2009 01:44 PM
LM Performance, Spohn Camaro 2010 Tubular Rear Trailing Arms w/ Del-Sphere Pivot Join	LMPerformance	V8 Bolt-Ons & Tunes	0	10-19-2009 01:34 PM