01-18-2017, 12:57 PM | #1 |
Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009
Location: Arizona
Posts: 2,682
|
Roto-fab dyno results from SCT Performance!
Here is a graph from the most recent dyno testing of the Roto-fab CAI. As many of you know, our system has shown legitimate gains when tested by a number of reputable tuners!
This graph is a great comparison of the Roto-fab CAI vs. the stock system on an otherwise stock Camaro SS. As you can see, our performance gains are achieved without considerable AFR skew, making this CAI a true "no-tune required" system! Dyno graph from SCT Performance Roto-fab CAI, dry filter, red logo, sound tube accommodation Thanks for your interest everyone, and please let me know if you have any CAI related questions. I would be glad to help! Michael |
01-18-2017, 01:47 PM | #2 |
Drives: 2016 Camaro SS Join Date: Apr 2016
Location: Utah
Posts: 713
|
Very nice. Did SCT do another run with a tune?
__________________
16 2SS 6MT NPP White | MRR | ACT | JBA | SCT | C7C
04 Ram 2500 CDT 4x4 Quad 91 Miata 1.8 Feal Wilwood Track Car 1morproject |
01-19-2017, 07:58 AM | #3 |
Drives: 2017 Camaro SS 1LE Join Date: Nov 2015
Location: Atlanta, GA
Posts: 148
|
Do you guys have any idea why my car would be throwing a code for barometric pressure sensor by chance? It doesn't happen all the time but sometimes it'll idle high around 1,000-1,100 RPM and it said reduced engine power the other night. Just trying to see if I did something wrong on the install
__________________
Show: C7 Carbon ZL1 Front Splitter/C7 Carbon ZL1 Side Skirts/Diode Dynamics LED Sidemarkers/Tinted Headlights, Fog Lights, and Rear Reflectors/20" Forgestar F14's in Bronze Burst
Go: 17" Forgestar F14s in Bronze Burst with Hoosier Drag Radials/Rotofab Intake w/ Dry Filter/EFI Flex Fuel Kit/Kooks 2" Longtubes with Offroad Connections/PRAY Performance Ported Intake Manifold/PRAY Performance Ported Throttle Body/PRAY Performance Ported Heads/PRAY Performance Tune Suspension: Phastek Lowering Springs/BMR Toe Rods/BMR Control Arms/BMR Trailing Arms/BMR Strut Tower Brace |
01-19-2017, 10:05 AM | #4 | |
Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009
Location: Arizona
Posts: 2,682
|
Quote:
Also, make sure all 4 hose clamps fully engage the duct work. Misalignment of the hose clamps can be a potential issue. Thanks for using our CAI, we will keep in touch! Michael |
|
01-19-2017, 10:08 AM | #5 |
Drives: 2017 Camaro SS 1LE Join Date: Nov 2015
Location: Atlanta, GA
Posts: 148
|
Thank you, I'll get out there and check everything out again and tighten it up and see if I have any problems
__________________
Show: C7 Carbon ZL1 Front Splitter/C7 Carbon ZL1 Side Skirts/Diode Dynamics LED Sidemarkers/Tinted Headlights, Fog Lights, and Rear Reflectors/20" Forgestar F14's in Bronze Burst
Go: 17" Forgestar F14s in Bronze Burst with Hoosier Drag Radials/Rotofab Intake w/ Dry Filter/EFI Flex Fuel Kit/Kooks 2" Longtubes with Offroad Connections/PRAY Performance Ported Intake Manifold/PRAY Performance Ported Throttle Body/PRAY Performance Ported Heads/PRAY Performance Tune Suspension: Phastek Lowering Springs/BMR Toe Rods/BMR Control Arms/BMR Trailing Arms/BMR Strut Tower Brace |
01-19-2017, 10:21 AM | #6 |
Account Suspended
Drives: 2016 CAMARO SS/ gpi built Join Date: Dec 2014
Location: Cabot ar
Posts: 374
|
id definatly be interested in seeing what the roto fab does on my land and sea dyno... i have one that was made up for test purposes and it picked up 0 ponies
|
01-19-2017, 10:32 AM | #7 | |
Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009
Location: Arizona
Posts: 2,682
|
Quote:
We have seen a number of 3rd party dyno tests showing solid gains, so I'm confident you're making good power if you're running a Roto-fab CAI! I'm looking forward to hearing more about your testing! Michael |
|
01-19-2017, 10:34 AM | #8 |
Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009
Location: Arizona
Posts: 2,682
|
|
01-19-2017, 10:58 AM | #9 |
Lethal Camaro
Drives: 16 2SS, 71 Std, Suburban RTS Join Date: Jun 2013
Location: Temecula, CA
Posts: 3,855
|
In my testing Roto-Fab makes great gains without a tune, but even better gains with a tune. I also believe their build quality is one of the best available.
__________________
|
01-21-2017, 11:43 PM | #10 | |
Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009
Location: Arizona
Posts: 2,682
|
Quote:
Do you plan to publish results of your CAI testing? We look forward to seeing your data! Have a great weekend, Michael |
|
01-22-2017, 08:38 AM | #11 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I've used the Rotofab on my old supercharged g8gt and I have one on my current SC 16ss. Best quality and performance of any I've ever run.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
01-23-2017, 10:13 PM | #12 |
Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009
Location: Arizona
Posts: 2,682
|
|
01-24-2017, 10:26 AM | #13 |
Drives: 2016 SS Garnet Red A8 Join Date: Jan 2016
Location: Phoenix, Az
Posts: 622
|
i still need to drive up there and check out the shop lol
|
01-24-2017, 11:12 AM | #14 |
Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009
Location: Arizona
Posts: 2,682
|
|
|
|
Post Reply
|
|
|