10-11-2011, 07:26 AM | #1 |
Drives: 2010 Camaro SS/RS, Cyber Grey Join Date: Jun 2011
Location: Harrison
Posts: 17
|
Aftermarket rims that fit a 315 wide tire, is 11-11.5 in good?
Hey guys I was looking at the nitro nto5r drag radial tires and was wondering if anyone knew about after market rims that are 11-11.5 in wide and if that size is good enough for the tires? Have a 2010 camaro ss
|
10-11-2011, 12:14 PM | #2 |
|
The recommended rim size for that size tire is 11in. wide, but the range is from 9-11, but if it is for a drag radial then always go with the intended size rim. If you do not it will crown the tire in the middle and the entire tire will not make contact and will not hook to its full potential. Check tirerack.com and find the tire you want and click on specs, in the specs it will list the rim ranges and recommended sizes.
|
10-11-2011, 03:46 PM | #3 |
|
The recommended wheel width for the Nitto NT05R (315/35R20) is 10.5" - 12.5". So, an 11.0" to 11.5" wheel will fit fine, although I think 11.0" is about the widest I've seen installed on a Camaro, not sure if an 11.5" will fit (the offsets would have to be dead perfect!).
|
10-12-2011, 08:44 AM | #4 |
Drives: 2010 Camaro SS/RS, Cyber Grey Join Date: Jun 2011
Location: Harrison
Posts: 17
|
Thanks guys for the help.
|
10-12-2011, 09:01 AM | #5 | |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
Quote:
|
|
10-12-2011, 09:06 AM | #6 |
NOW CAMMED & SUPERCHARGED
Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008
Location: Ar
Posts: 2,336
|
Be ready to spend 3-6k to be able to run that tire on that size rim!
__________________
Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99
|
10-12-2011, 10:09 AM | #7 |
|
Just stick with an 11.0" wheel and you'll be fine....
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
5th Gen Suspension -- The Book | JusticePete | Suspension / Brakes / Chassis | 151 | 05-07-2015 05:52 PM |
Searching for the best wide tire combo for ride and look | PatrickfromMD | Wheels and Tires Talk Sponsored by The Tire Rack | 18 | 07-10-2010 09:03 AM |
Good at finding rims and eyeing what it'll look like? HELP! | DChan | Wheels and Tires Talk Sponsored by The Tire Rack | 8 | 05-11-2010 03:44 PM |
Why use premium gas? | avro206 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 81 | 01-11-2010 02:38 PM |
Tire Monitoring System | monevz28 | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 7 | 11-22-2009 03:42 PM |