Borla Sport S-Type Catback - PA $650 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

harner · 04-29-2015, 10:19 PM

Up for sale is a great looking Borla Sport (S-Type) Catback! This is a $1,000 system (Summit Racing: http://www.summitracing.com/parts/bo...t/model/camaro)

Comes with the X-Pipe, intermediate tubes, and axle system plus the band clamps. Look at the pictures for more detail.

This was on the car for approximately 16k miles and installed by Pep Boys. It looks great, sounds great, and performs great! I switched to a different setup so now this needs to go. $650 OBO

I will also meet within an hour of Cabela's in Hamburg, PA.

Currently on the fence about shipping, but I may entertain the idea if it's not too much of a hassle.

Long story short, I thought this was an axle back system. Compared some pictures and realized it's a Borla X pipe so it must be a catback. I was originally selling this as an axleback plus all the other tubing separately, but it's indeed a Borla S-Type catback. Not splitting up. I wanted more noise and went with the Pypes catback.

Sound clip:

ToolFan66 · 04-29-2015, 10:35 PM

There are two pieces missing, the front two pipes that connect from the headers/HiFlo cats or what have you to the x pipe..

Haha.. Never mind I see them, it's just the way you had them laid out..

The whole kit is there...

Nice price by the way...

harner · 04-29-2015, 10:41 PM

Quote:

Originally Posted by ToolFan66

There are two pieces missing, the front two pipes that connect from the headers/HiFlo cats or what have you to the x pipe..

Well they are not in the pics anyways...

Unfortunately, I bought the car with the system installed. This is how they bolted right up to my stock cats. It sounds like the complete kit included connecting pipes in front of the X pipe.

I figured it was complete since the pic on Summit shows the correct amount of sections:

Regardless, what you see in the pics are what you get. Thanks again for the feedback.

Edit- also I don't remember which direction the X pipe went, so it may have been flipped around.

ToolFan66 · 04-29-2015, 10:45 PM

I edited my post, the whole kit is there..

harner · 04-29-2015, 10:46 PM

Quote:

Originally Posted by ToolFan66

I edited my post, the whole kit is there..

Haha, you had me going there. Thanks for clarifying AND verifying! They are priced to move. Thanks.

harner · 05-01-2015, 09:50 PM

To the top

harner · 05-03-2015, 10:13 AM

Still have it, make some reasonable offers

FrostySS · 05-03-2015, 10:31 AM

How is this still for sale? Great price. $300 and a pack of Skittles?

harner · 05-03-2015, 11:01 AM

Thanks lol. I know, I thought there were a lot of Borla fans on this forum.

ToolFan66 · 05-03-2015, 11:23 AM

Quote:

Originally Posted by FrostySS

How is this still for sale? Great price. $300 and a pack of Skittles?

Agreed, wish this would have popped up when I purchased mine, even with shipping it would have saved me a few bucks..

harner · 05-03-2015, 08:07 PM

If anyone is concerned about distance, I'll be in OCMD for the cruise May 14-17 and Norwich NY on Saturday May 23rd. I can bring it with, just would like a deposit.

harner · 05-05-2015, 09:30 PM

PMs responded. Maybe someone can shed some light if this will work on a v6 car. I had a few Q's about it but I'm sure it could be made to work somehow.

Price is not firm.

harner · 05-06-2015, 04:04 PM

Lots of interest, yet no one willing to bite the bullet. I have a box big enough to ship, I just need a destination...oh and money.

kaseyb85 · 05-08-2015, 08:57 AM

What's the tip size?

04-29-2015, 10:35 PM	#2
ToolFan66 Drives: 2011 2SS 6.2L W/RS package Join Date: Jan 2011 Location: Colorado Posts: 3,008	There are two pieces missing, the front two pipes that connect from the headers/HiFlo cats or what have you to the x pipe.. Haha.. Never mind I see them, it's just the way you had them laid out.. The whole kit is there... Nice price by the way... __________________ KooKs LT Headers, Borla S-Type cat back, RotoFab CAI, Bo White PTB, RMCR tune...

04-29-2015, 10:45 PM	#4
ToolFan66 Drives: 2011 2SS 6.2L W/RS package Join Date: Jan 2011 Location: Colorado Posts: 3,008	I edited my post, the whole kit is there.. __________________ KooKs LT Headers, Borla S-Type cat back, RotoFab CAI, Bo White PTB, RMCR tune...

05-01-2015, 09:50 PM	#6
harner Drives: 2018 ZL1 A10 Join Date: Sep 2014 Location: NEPA Posts: 450	To the top __________________ SOLD! 9/1/2020 2018 ZL1 A10 Hyper Blue - Rotofab CAI, Gibson catback @SurefireDetail OEM ZLE tails/third brake light, Gen5DIY reverse LEDs, front Amber LEDs, SMG laser LED side markers, SMG smoked reflectors 1994 Trans Am LM7/CPT 4L60E/9" 1987 IROC 2006 Silverado

05-03-2015, 10:13 AM	#7
harner Drives: 2018 ZL1 A10 Join Date: Sep 2014 Location: NEPA Posts: 450	Still have it, make some reasonable offers __________________ SOLD! 9/1/2020 2018 ZL1 A10 Hyper Blue - Rotofab CAI, Gibson catback @SurefireDetail OEM ZLE tails/third brake light, Gen5DIY reverse LEDs, front Amber LEDs, SMG laser LED side markers, SMG smoked reflectors 1994 Trans Am LM7/CPT 4L60E/9" 1987 IROC 2006 Silverado

05-03-2015, 10:31 AM	#8
FrostySS Drives: 2018 Redline Edition 2SS Join Date: Dec 2014 Location: Mays Landing, NJ Posts: 778	How is this still for sale? Great price. $300 and a pack of Skittles? __________________ 2018 Redline Edition 2SS- A8, NPP, MRC, Recaro seats, ECS Novi 1500 tuned by EFX, cat deletes, Mighty Mouse Wild CC, GM STB, smoked ZL1 3rd brake light, Xpel XR Black 35% tint all around, Street Scene front splitter, C7 Carbon ZL1 side skirts Drake Muscle Car wicker bill, Adams Polishes Ceramic Coating 2010 Infiniti G37x Sedan for the DD.

05-03-2015, 11:01 AM	#9
harner Drives: 2018 ZL1 A10 Join Date: Sep 2014 Location: NEPA Posts: 450	Thanks lol. I know, I thought there were a lot of Borla fans on this forum. __________________ SOLD! 9/1/2020 2018 ZL1 A10 Hyper Blue - Rotofab CAI, Gibson catback @SurefireDetail OEM ZLE tails/third brake light, Gen5DIY reverse LEDs, front Amber LEDs, SMG laser LED side markers, SMG smoked reflectors 1994 Trans Am LM7/CPT 4L60E/9" 1987 IROC 2006 Silverado

05-03-2015, 08:07 PM	#11
harner Drives: 2018 ZL1 A10 Join Date: Sep 2014 Location: NEPA Posts: 450	If anyone is concerned about distance, I'll be in OCMD for the cruise May 14-17 and Norwich NY on Saturday May 23rd. I can bring it with, just would like a deposit. __________________ SOLD! 9/1/2020 2018 ZL1 A10 Hyper Blue - Rotofab CAI, Gibson catback @SurefireDetail OEM ZLE tails/third brake light, Gen5DIY reverse LEDs, front Amber LEDs, SMG laser LED side markers, SMG smoked reflectors 1994 Trans Am LM7/CPT 4L60E/9" 1987 IROC 2006 Silverado

05-05-2015, 09:30 PM	#12
harner Drives: 2018 ZL1 A10 Join Date: Sep 2014 Location: NEPA Posts: 450	PMs responded. Maybe someone can shed some light if this will work on a v6 car. I had a few Q's about it but I'm sure it could be made to work somehow. Price is not firm. __________________ SOLD! 9/1/2020 2018 ZL1 A10 Hyper Blue - Rotofab CAI, Gibson catback @SurefireDetail OEM ZLE tails/third brake light, Gen5DIY reverse LEDs, front Amber LEDs, SMG laser LED side markers, SMG smoked reflectors 1994 Trans Am LM7/CPT 4L60E/9" 1987 IROC 2006 Silverado

05-06-2015, 04:04 PM	#13
harner Drives: 2018 ZL1 A10 Join Date: Sep 2014 Location: NEPA Posts: 450	Lots of interest, yet no one willing to bite the bullet. I have a box big enough to ship, I just need a destination...oh and money. __________________ SOLD! 9/1/2020 2018 ZL1 A10 Hyper Blue - Rotofab CAI, Gibson catback @SurefireDetail OEM ZLE tails/third brake light, Gen5DIY reverse LEDs, front Amber LEDs, SMG laser LED side markers, SMG smoked reflectors 1994 Trans Am LM7/CPT 4L60E/9" 1987 IROC 2006 Silverado

05-08-2015, 08:57 AM	#14
kaseyb85 Keep Calm & Chive On Drives: 2013 Camaro SS/RS CGM Join Date: Apr 2013 Location: Columbia, SC Posts: 373 View My Garage	What's the tip size? __________________ 2013 Camaro SS/RS CGM