12-01-2016, 11:49 AM | #1 |
Drives: 2016 Camaro 2SS SILVER ICE METALLIC Join Date: Oct 2016
Location: Michigan
Posts: 123
|
Street scene front splitter
Has anyone installed the street scene front splitter? Pros & cons, pics would be great!
|
12-01-2016, 12:18 PM | #2 |
Drives: 2016 Corvette Z06 M6 Join Date: May 2009
Location: Odenton, MD
Posts: 874
|
Check my pics here: http://www.camaro6.com/forums/showthread.php?t=472535
I like that it's thinner than all the other offerings, and in particular on the side skirts, doesn't cover the rockers
__________________
2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank
20/21 BC Forged Wheels : BC Coilovers: TA Aero |
12-01-2016, 12:43 PM | #3 |
Drives: 2016 Camaro 2SS SILVER ICE METALLIC Join Date: Oct 2016
Location: Michigan
Posts: 123
|
Thanks! Looks great!
|
12-01-2016, 02:17 PM | #4 |
Drives: 2016 Camaro SS Join Date: Jan 2016
Location: Carrollton, TX
Posts: 149
|
Here's mine
__________________
#LoneStarCamaro
1SS, Nightfall Gray, Metallic Black Center Stripe, Manual Transmission, NPP, Black Bowties, Gray Split Spoke Wheels TFBB66 1100 1/27/16---2000 3/5/16---3000 3/10/16 TPW 4/11---3100 3/29/16---3300 3/31/16---3400 4/5/16---3800 4/12/16 VIN---4200 4/13/16---4300 4/14/16---4200 4/18/16---4300 4/19/16---4300 5/8/16---4B00 5/11/16---4200 5/12/16 On a train to DFW---5000 5/18/16---6000 5/19/16 2007 Jeep Wrangler X |
12-01-2016, 02:24 PM | #5 |
Drives: 2016 2SS, 2011 RS (past) Join Date: Aug 2011
Location: The Central Coast
Posts: 909
|
I love it. I personally think it matches the cars lines and appearance better than the stock splitter.
__________________
Past: 2011 RS, 2013 ZL1 Current: 2016 2SS |
12-03-2016, 08:47 PM | #6 |
Drives: 2016 CAMARO 2SS RED HOT Join Date: Jun 2016
Location: Louisiana
Posts: 65
|
I love it after installing it. Looks the best of all the splitters in my opinion. One word of advice, I had my professionally painted. After picking it up, it would not go on. I could tell the flange was bent and I went back up to the shop. They baked it in the oven after painting like they do all things they paint. It must have warped in the oven. I tried everything to get it on. I got creative and took a torch on the bottom and heated it up and bent it in place so that the holes line up. After that everything went great. Couldn't be happier besides the struggle getting it on. So if you get it painted, tell them to bake at a low temp, like 90 degrees or so. They baked at 150.
__________________
2017 2ss Red Hot. Npp, Mrc, adrenaline red, red knee pads.
|
|
|
Post Reply
|
|
|