The 2013 Bass Pro Car Show Schedule - Page 8 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CFD · 05-09-2013, 10:08 AM

Quote:

Originally Posted by Maxspeed

How did it happen? Were you driving it hard or normal driving?

I was driving it hard but that wasn't the cause. The pin that holds the roller and bearings in place backed out, it must have been defective from the factory as the hole the pin rides in is in tact and the pin is in one piece so it didn't break. I am thinking it wasn't pinned properly when manufactured.

2012-2SS · 05-09-2013, 10:12 AM

Quote:

Originally Posted by CFD

I was driving it hard but that wasn't the cause. The pin that holds the roller and bearings in place backed out, it must have been defective from the factory as the hole the pin rides in is in tact and the pin is in one piece so it didn't break. I am thinking it wasn't pinned properly when manufactured.

Warranty?

Sent from my Galaxy S3

CFD · 05-09-2013, 10:17 AM

Quote:

Originally Posted by 2012-2SS

Warranty?

Sent from my Galaxy S3

I wish, the car is cammed as well as a bunch of other engine mods.

2012-2SS · 05-09-2013, 11:30 AM

Quote:

Originally Posted by CFD

I wish, the car is cammed as well as a bunch of other engine mods.

No I meant from the lifter manufacturer

Sent from my Galaxy S3

CFD · 05-09-2013, 11:58 AM

Quote:

Originally Posted by 2012-2SS

No I meant from the lifter manufacturer

Sent from my Galaxy S3

That would be GM, they are LS3 lifters. Anyways, aftermarket manufacturers would warranty the lifter but not the other parts and the list is large lol. On top of that the cam and lifters were done over 40,000 miles ago. Here is a picture of the lifter, as you can see the pin didn't break and the hole is in tact.

2012-2SS · 05-09-2013, 11:59 AM

Quote:

Originally Posted by TRC-SS

So all the photos are posted on Median Mag's Website. However, like most photograph companies i cannot copy, save or re-post the photo

I emailed them about getting a copy or prints from the photos at the show and he said he won't give them to me or even sell them. If I want pictures with the girls I'd have to set up a private shoot for $350+ depending on some variables.

Sent from my Galaxy S3

TRC-SS · 05-09-2013, 12:00 PM

Yea I'm all set!

SSICKO · 05-15-2013, 09:28 AM

Anyone going tomorrow? I might be able to make it. If so, where do you guys meet up before and what time?

Maxspeed · 05-15-2013, 10:39 AM

We come separately. I try and get there around 2 to park near pole 1606 on the end.

CFD · 05-15-2013, 12:40 PM

I'm going to try, seeing I live around the corner it should be easy if I can keep my car together. lol.

lakersftbl69 · 05-15-2013, 01:27 PM

I gotta work cant make it

2012-2SS · 05-15-2013, 04:13 PM

Count me out for the next 2

Sent from my Galaxy S3

Maxspeed · 05-15-2013, 04:42 PM

Anyone else going?

TRC-SS · 05-15-2013, 05:12 PM

Im gonna have to miss this one!

05-09-2013, 12:00 PM	#105
TRC-SS 700RWHP-650TQ Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010 Location: Shrewsbury Massachusetts Posts: 5,269 View My Garage	Yea I'm all set! __________________ View Build HERE>>>>>MY 2011 2SS/RS JOURNAL

05-15-2013, 09:28 AM	#106
SSICKO Drives: SSICKO Join Date: Jul 2010 Location: MA Posts: 754	Anyone going tomorrow? I might be able to make it. If so, where do you guys meet up before and what time? __________________ Slowhawk Performance Built & Tuned

05-15-2013, 10:39 AM	#107
Maxspeed ~COTW 6/30/14~ Drives: 2011 Camaro SS/RS Join Date: Oct 2011 Location: Mansfield Mass Posts: 2,906 View My Garage	We come separately. I try and get there around 2 to park near pole 1606 on the end. __________________ Mods: Heritage Grill, Blade Spoiler, Corrado Hoodliner Mural, Premium Engine Boxes, Radiator Shroud, Custom Painted Bowties, Dipstick & Engine Caps, RX Catch Can, Corsa cat back exhaust, CAI black powder coat cold air, Apex cold air intake scoop and Apex washer tank relocate kit, Dynatech SuperMAXX Ceramic Coated LT Headers, High Flow Cats, JRE470 Rough Idle Cam Package, DSS 1,000 RWHP Axels, Slowhawk Mustang Dyno Tune, QTP QTEC 66 Low Profile Cutouts and iTSX. 453 RWHP 427 RWTQ WEB LINKS BUILD TIMING CHAIN FAILURE TRANSITION FROM STOCK TO CAM VID

05-15-2013, 01:27 PM	#109
lakersftbl69 Drives: 2010 camaro ss Join Date: Mar 2009 Location: conway sc. Posts: 1,435 View My Garage	I gotta work cant make it __________________ ordered dec 15 2008 picked up on june 8 2009. upgrades kooks 1 7/8" LTH w/ deleted cats, corsa exhaust, hurst short throw shifter stage 3 comp cam, 3.91 gears ecs kit blower, meth injection, upgraded axles, drive shaft, McLeod rxt clutch, fully forged 416ci stroker all installed and dyno tuned by slowhawk performance in bridgewater ma.

05-15-2013, 04:13 PM	#110
2012-2SS Drives: 2012 Camaro 2SS/RS Join Date: Dec 2011 Location: Dover, NH Posts: 678	Count me out for the next 2 Sent from my Galaxy S3 __________________ 2012 Camaro 2SS/RS, Hurst Short Throw, IdealG M/C, Pypes Pipe Bomb, LSR Cold Air Intake, LSR Toe Links/Lower Control Arms Clear Image headers, high flows, Slowhawk tune 1974 Chevy K10 Built 355, FAST EZ EFI, 5speed 2000 Chevy Tahoe LT 5.3L, Slowhawk tune

05-15-2013, 12:40 PM	#108
CFD Drives: 2SS/RS L99 BLACK Join Date: Apr 2010 Location: Franklin , MA Posts: 6,696	I'm going to try, seeing I live around the corner it should be easy if I can keep my car together. lol.

05-15-2013, 04:42 PM	#111
Maxspeed ~COTW 6/30/14~ Drives: 2011 Camaro SS/RS Join Date: Oct 2011 Location: Mansfield Mass Posts: 2,906 View My Garage	Anyone else going? __________________ Mods: Heritage Grill, Blade Spoiler, Corrado Hoodliner Mural, Premium Engine Boxes, Radiator Shroud, Custom Painted Bowties, Dipstick & Engine Caps, RX Catch Can, Corsa cat back exhaust, CAI black powder coat cold air, Apex cold air intake scoop and Apex washer tank relocate kit, Dynatech SuperMAXX Ceramic Coated LT Headers, High Flow Cats, JRE470 Rough Idle Cam Package, DSS 1,000 RWHP Axels, Slowhawk Mustang Dyno Tune, QTP QTEC 66 Low Profile Cutouts and iTSX. 453 RWHP 427 RWTQ WEB LINKS BUILD TIMING CHAIN FAILURE TRANSITION FROM STOCK TO CAM VID

05-15-2013, 05:12 PM	#112
TRC-SS 700RWHP-650TQ Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010 Location: Shrewsbury Massachusetts Posts: 5,269 View My Garage	Im gonna have to miss this one! __________________ View Build HERE>>>>>MY 2011 2SS/RS JOURNAL