02-08-2015, 04:06 PM | #1 |
Drives: 2010 2SS/RS M6 Join Date: Oct 2012
Location: East, Tx
Posts: 239
|
FS: 1000hp DSS axles SOLD
I purchased these axles last year and only put maybe 4-5k miles on them before I swapped to a zl1 HD kit. I no longer need these as they will not fit a zl1 diff. These are DSS 1000hp axles that have been sent to DSS to make sure they are good to go for new owner. I just got them back from Frank at DSS last week. They are still in the box and ready to go. Looking to get $875 Shipped as they are practically new. SOLD
__________________
2010 Camaro 2SS/RS
416 CI M6-LS3 Kenne Bell 3.6, Livernois Dual Fuel Pump Kit w/KB BAP, Futral Motorsports Blower Cam, SW 2"Headers, Zl1 Dual Mode Exhaust, Street Slayer Billet Twin-Disc Clutch,PFADT lowering springs and sway bars, Iforged Classic Wheels, AI Meth Injection, rx dual checkvalve catchcan, Innovators West 8-Rib pulley setup....690RWHP/701RWTQ @ 10 PSI-CALIBRATED BY KARGER @ SNL PERFORMANCE 1995 Camaro Z28 LT1 M6 383 Fully Forged shortblock Last edited by RRTX-SS; 02-09-2015 at 11:02 AM. Reason: sold |
02-08-2015, 10:05 PM | #2 |
Drives: SIM 2010 2SS/RS LS3 LPE750 Join Date: Feb 2012
Location: Mckinney, Texas
Posts: 764
|
Pm sent
|
02-08-2015, 10:58 PM | #3 |
Drives: 2010 2SS/RS M6 Join Date: Oct 2012
Location: East, Tx
Posts: 239
|
Pms replied
__________________
2010 Camaro 2SS/RS
416 CI M6-LS3 Kenne Bell 3.6, Livernois Dual Fuel Pump Kit w/KB BAP, Futral Motorsports Blower Cam, SW 2"Headers, Zl1 Dual Mode Exhaust, Street Slayer Billet Twin-Disc Clutch,PFADT lowering springs and sway bars, Iforged Classic Wheels, AI Meth Injection, rx dual checkvalve catchcan, Innovators West 8-Rib pulley setup....690RWHP/701RWTQ @ 10 PSI-CALIBRATED BY KARGER @ SNL PERFORMANCE 1995 Camaro Z28 LT1 M6 383 Fully Forged shortblock |
02-09-2015, 10:58 AM | #4 |
Drives: 2011 camaro ss Join Date: Sep 2013
Location: Winter Haven, Florida
Posts: 452
|
Money sent
__________________
2011 ls3 ss/rs, Kooks long tube headers, gutted high flow cats, 231/239. 624" lifted squared 115+3 lsa comp cam, ecs supercharger, Alky methanol kit, DSS 1000hp axles, BMR toe rods, BMR trailering arms, Fore innovations dual fuel pump. Flex fuel sensor and 360 custom tunes, hp tuners NGAUGE. 752 hp with 93 octane and 825 hp with E85.
|
02-09-2015, 11:01 AM | #5 |
Drives: 2010 2SS/RS M6 Join Date: Oct 2012
Location: East, Tx
Posts: 239
|
Payment recieved.....SOLD
__________________
2010 Camaro 2SS/RS
416 CI M6-LS3 Kenne Bell 3.6, Livernois Dual Fuel Pump Kit w/KB BAP, Futral Motorsports Blower Cam, SW 2"Headers, Zl1 Dual Mode Exhaust, Street Slayer Billet Twin-Disc Clutch,PFADT lowering springs and sway bars, Iforged Classic Wheels, AI Meth Injection, rx dual checkvalve catchcan, Innovators West 8-Rib pulley setup....690RWHP/701RWTQ @ 10 PSI-CALIBRATED BY KARGER @ SNL PERFORMANCE 1995 Camaro Z28 LT1 M6 383 Fully Forged shortblock |
02-09-2015, 11:03 AM | #6 |
Drives: 2011 camaro ss Join Date: Sep 2013
Location: Winter Haven, Florida
Posts: 452
|
Guess I will wait to do the rear suspension until I get these. Thanks
__________________
2011 ls3 ss/rs, Kooks long tube headers, gutted high flow cats, 231/239. 624" lifted squared 115+3 lsa comp cam, ecs supercharger, Alky methanol kit, DSS 1000hp axles, BMR toe rods, BMR trailering arms, Fore innovations dual fuel pump. Flex fuel sensor and 360 custom tunes, hp tuners NGAUGE. 752 hp with 93 octane and 825 hp with E85.
|
02-09-2015, 11:44 AM | #7 |
Drives: SIM 2010 2SS/RS LS3 LPE750 Join Date: Feb 2012
Location: Mckinney, Texas
Posts: 764
|
I'm glad someone bought these damn things. I was tempted
|
|
|
|
|