05-31-2020, 08:24 PM | #1 |
Drives: 2012 Camaro SS, 1989 Chevy c1500 Join Date: Feb 2019
Location: Dallas,Tx
Posts: 17
|
20x10.5 Fitment Issues
So i had ordered some Niche Misanos 20x10.5 +35 for all 4 corners. Ive read that some fit with no spacers and others with spacers so i had also ordered some 5mm wheel spacers. Even with a 5mm spacer up front it would not clear my caliper, i tried a 10mm and it just barely clear. The rears are having the same issues as the fronts. Which i found puzzling since ive seen others on this forum run a similar set up. Its a 2012 SS with just standard stock suspension. Any one else ever ran into similar issues?
|
06-01-2020, 01:20 AM | #2 |
Account Suspended
|
Why would you order rims with the wrong offset? For 10+ wide rims, it's ET23.
You bought factory offset valued rims, when wheel-size.com shows the offset for 10" wide rims. You went ET35 for factory 8.5" wide rims, with a 10.5" wide rim, that's where your mistake was, not looking it up. https://www.wheel-size.com/size/chevrolet/camaro/2012/ Go down to the 6.2 Supercharged (last one), shows 10" wide rims with the ET23 offset. |
06-01-2020, 11:21 AM | #3 | |
Drives: 2012 Camaro SS, 1989 Chevy c1500 Join Date: Feb 2019
Location: Dallas,Tx
Posts: 17
|
Quote:
|
|
06-01-2020, 03:25 PM | #4 | |
Account Suspended
|
Quote:
IF they aren't fitting your car, then what's different? Stock suspension isn't the main issue, it would be the calipers. |
|
|
|
|
|