Blacked Out SS with Razzi Body KIT - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ChvyBoss · 03-16-2011, 03:37 PM

Quote:

Originally Posted by NORSS426

Chvy Boss...

Looks real good man! I have been mauling over the idea of getting the Razzi kit for my care as well. How did installation go for you? Did you have to make any modifications for the kit to fit properly or to reinforce it?

Had to add some extra screws on the rear diffuser cuz if not I know it would flap on the freeway. But thats about it everything else went well

NORSS426 · 03-16-2011, 05:16 PM

Is there a do it yourself on where and how to add the screws? I could feel it out but it would be easier if I find out how from someone that has already done it.

Also, do you have to put a lot of holes in your car for this and are they hidden under body holes?

BlessedChef10 · 03-16-2011, 05:20 PM

LOOKS GREAT MY VALLEY BRO!

mikepage0007 · 03-16-2011, 07:00 PM

Quote:

Originally Posted by NORSS426

Is there a do it yourself on where and how to add the screws? I could feel it out but it would be easier if I find out how from someone that has already done it.

Also, do you have to put a lot of holes in your car for this and are they hidden under body holes?

under center of trunk {under car} there is a 1 1/2 threaded stud sticking down..go to home depot and buy a 18inch roof truss bracket { 18in long and about 1inch wide with 3/8 staggered holes}..then get some 2 part plastic epoxy and take a 3/8 bolt 1inch long and epoxy to center bottom of underside of diffuser..do not drill thru diffuser..it will set up in a hr at most...attach roof truss brace to trunk stud and attch bolt , then prebend brace down to diffuser bolt and bend brace so that hole lines up with bolt you attached to diffuser..push brace thru bolt, add nut and a backup nut on each to prevent it backing off and your done...just make sure that you bend brace at right angle so that you don,t suck up diffuser..also i find that aluminum rivets are much better than screws, they dont rust or strip out or backout...i used rivets on skirts and everywhere it called for a screw that was not factory..

ron10 · 03-16-2011, 07:19 PM

love the car,looks great.i am still one of the people that does not like all black wheels.

ChvyBoss · 03-16-2011, 08:57 PM

Quote:

Originally Posted by mikepage0007

under center of trunk {under car} there is a 1 1/2 threaded stud sticking down..go to home depot and buy a 18inch roof truss bracket { 18in long and about 1inch wide with 3/8 staggered holes}..then get some 2 part plastic epoxy and take a 3/8 bolt 1inch long and epoxy to center bottom of underside of diffuser..do not drill thru diffuser..it will set up in a hr at most...attach roof truss brace to trunk stud and attch bolt , then prebend brace down to diffuser bolt and bend brace so that hole lines up with bolt you attached to diffuser..push brace thru bolt, add nut and a backup nut on each to prevent it backing off and your done...just make sure that you bend brace at right angle so that you don,t suck up diffuser..also i find that aluminum rivets are much better than screws, they dont rust or strip out or backout...i used rivets on skirts and everywhere it called for a screw that was not factory..

Couldn't have said it better thanks for posting this

ChvyBoss · 03-16-2011, 08:58 PM

Quote:

Originally Posted by ron10

love the car,looks great.i am still one of the people that does not like all black wheels.

It's all good I know a lot of people aren't fans of the blacking out. But thanks for the comments. I appreciate it

2010 SSRS · 03-16-2011, 09:00 PM

your Camaro looks Evil as Hell, I love it.

ChvyBoss · 03-16-2011, 09:20 PM

Quote:

Originally Posted by 2010 SSRS

your Camaro looks Evil as Hell, I love it.

thanks !!! Thats exactly the look I was going for

tmac1granger33 · 03-17-2011, 02:12 AM

damn .. killin it with the murdered out razzi look!

Im NEXT

Revo1 · 03-17-2011, 04:53 AM

Quote:

Originally Posted by BlessedChef10

LOOKS GREAT MY VALLEY BRO!

I'm in a different valley now, but spent most of my life growing up in 818!

MohawksIOSS · 03-17-2011, 05:37 AM

I love the rear bumper and spoiler!!! 2 thumbs up!!

NORSS426 · 03-17-2011, 10:34 AM

Thanks for the tips guys! I appreciate it!

strstalker · 03-17-2011, 12:29 PM

looks good i love the murdered out look

03-16-2011, 05:20 PM	#17
BlessedChef10 BLESSEDCHEF10 Drives: 2010 2lt camaro rs Join Date: Feb 2010 Location: west hills,ca Posts: 696 View My Garage	LOOKS GREAT MY VALLEY BRO! __________________

03-16-2011, 09:00 PM	#22
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	your Camaro looks Evil as Hell, I love it. __________________ Jannetty Racing JRE Street Package

03-17-2011, 05:37 AM	#26
MohawksIOSS SoCal HT5 (COTW:12/26/11) Drives: 2011 Inferno Orange 2SS Join Date: Jul 2010 Location: Diego Garcia, BIOT Posts: 399 View My Garage	I love the rear bumper and spoiler!!! 2 thumbs up!! __________________ 3/2/15 (787HP/822TQ @13psi)

03-17-2011, 12:29 PM	#28
strstalker get some Drives: 2010 CAMARO SS yellow w/black strip Join Date: Jan 2011 Location: EWING N.J. Posts: 47 View My Garage	looks good i love the murdered out look __________________ Jus When EveryOne Thought The Streets Were Safe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro SS with painted ground effects body kit and stripes down front fascia	rolnslo	Camaro Photos \| Spyshots \| Video \| Media Gallery	148	10-17-2014 12:36 PM
Do you want the Z28?	ChrisB	Camaro ZL1 Forum - ZL1 Specific Topics	1616	09-04-2010 11:49 PM
SS RAZZI KIT SPY PHOTOS UP!!!! Available now!!!!!	orange10s.c.	Exterior Parts & Accessories	42	01-29-2010 06:04 PM
SS RAZZI KIT READY TO SHIP AND TAKING ORDERS TODAY !!!!!!!!	orange10s.c.	Exterior Parts & Accessories	8	01-19-2010 06:57 AM
RAZZI LOOKING FOR CAMARO SS IN ATLANTA AREA	thespymaster	USA - Southeast	4	12-29-2009 10:38 AM

03-16-2011, 05:16 PM	#16
NORSS426 Drives: 2010 Camaro SS2/RS Join Date: May 2010 Location: Livonia, MI Posts: 101	Is there a do it yourself on where and how to add the screws? I could feel it out but it would be easier if I find out how from someone that has already done it. Also, do you have to put a lot of holes in your car for this and are they hidden under body holes?

03-16-2011, 07:19 PM	#19
ron10 Drives: 2010 2SS IOM L99 Join Date: Jan 2010 Location: LOUISVILLE,KY.. Posts: 7,545	love the car,looks great.i am still one of the people that does not like all black wheels.

03-17-2011, 02:12 AM	#24
tmac1granger33 NM HT5 Drives: COTW 3/5/12 Join Date: Jul 2009 Location: los lunas, New Mexico Posts: 1,986 View My Garage	damn .. killin it with the murdered out razzi look! Im NEXT

03-17-2011, 10:34 AM	#27
NORSS426 Drives: 2010 Camaro SS2/RS Join Date: May 2010 Location: Livonia, MI Posts: 101	Thanks for the tips guys! I appreciate it!