04-06-2018, 08:16 PM | #351 |
|
Still waiting on the Lakewood drag shocks (90/10 fronts and 50/50 rears). The 3.90 gears are ready to be installed. Shipped Tracy down my OEM v6 springs since they are required to maintain proper spring seat pressure. Tracy also finished beefing up another 6L50E. So once the drag shocks arrive we will drop the rear to do the gear change and replace the coilovers and also swap the transmissions.
__________________
Instagram @orange_maro_
|
04-17-2018, 04:48 PM | #352 |
|
Just ordered the BMR bushing kit, rear, upper control arm in red and the Braille battery B2015, 15lbs. Stock is 44lbs, so cutting 29lbs in the rear.
Still waiting on the Lakewood drag shocks, there was supposedly a supply issue which held them up. So we decided to strip the interior, take out the windshields and drop her off for the cage work; 8.5cert cage with door swing outs and halo.
__________________
Instagram @orange_maro_
Last edited by djcolopi; 04-17-2018 at 05:04 PM. |
04-24-2018, 09:19 PM | #353 |
|
Parts have arrived.......Lakewood drag shocks, braille battery (B2015) and BMR bushing kit, rear, upper control arm in red. Waiting on the AEM meth fail safe gauge and the TCI blackout w/o cover shifter.
Ordered the Griffin Universal Fit ComboUnit Radiator, Part# CU-55182-XS. Dimensions 17x19x2.68. We did run into an electrical problem; we disconnected the battery and the flashers came on. Since we removed the radio control panel we have no way to control them. Since the panel is no longer plugged in, it is defaulting to flashers on in the BCM. I have contacted Ofer from gen5DIY. He responded back right away, he has camaro con this weekend so next week he will take a stab at figuring this problem out for us. Car was put on a trailer and cage work starts tomorrow. We have a time deadline, so he is going to be working overtime on designing and fabricating the cage. Should have her back Monday (4/30/18). I will post up progress images over the next week.
__________________
Instagram @orange_maro_
|
04-25-2018, 07:46 AM | #354 |
Jan
Drives: 2010 Camaro 1LT Red Jewel tintcoat Join Date: May 2010
Location: Springfield, TN
Posts: 16,225
|
Amazing build!
__________________
|
05-03-2018, 02:53 PM | #355 |
|
Some progress images. This weekend we are going to get the cage certified and drop in the polycarbonate windshields
__________________
Instagram @orange_maro_
|
05-21-2018, 10:08 PM | #356 |
|
Ordered a JAZ 12gal drag racing fuel cell setup (through Justin Hilliard from BCS Auto) and the VFN fiberglass dash (4lbs). Patrick has removed the rear deck and rear seat support bar. Next he is cutting off the rear spare tire well and fabricating a firewall. Then he is installing the X bar. Once the dash and the pro racing steering column arrives, he will finish the dash bar. Patrick also removed the black box surrounding the cabin air filter and sealed the firewall. I also decided to remove the ebrake setup.
__________________
Instagram @orange_maro_
|
05-27-2018, 08:25 PM | #357 |
|
Dash bar completed, firewall sealed, door swingouts completed. Patrick also removed my ebrake setup.
__________________
Instagram @orange_maro_
|
05-27-2018, 09:38 PM | #358 |
Drives: 2012 1SS M6 IOM Join Date: Dec 2012
Location: New Rochelle New York
Posts: 1,428
|
That's a nice cage, you plan on painting it, or leaving it?
__________________
2012 1SS Camaro LS3 Inferno Orange
Mods: LSA Supercharger, 2.55 Pulley, Custom Boost Cam, ARH LTH 1 7/8, HFC, 3' Magnaflow Exhaust, JLT CAI, Elite CC V2, BO White Stage 2 TB, GM 3.91 Gears, DSS CF Driveshaft, BMR Bushing Kit.... . Tuned by JTM Motorsports 540 Hp 550Tq on 9PSI Axles, Monster Clutch, Hotchkis TVS Track Pack kit.......For 2018. |
05-27-2018, 09:44 PM | #359 |
|
Painting the interior and cage inferno orange!
__________________
Instagram @orange_maro_
|
05-28-2018, 09:45 AM | #360 |
Jan
Drives: 2010 Camaro 1LT Red Jewel tintcoat Join Date: May 2010
Location: Springfield, TN
Posts: 16,225
|
Nice!
__________________
|
05-31-2018, 04:13 PM | #361 |
Instagram: Mr2Hard2See
Drives: 2011 2SS/ RS Join Date: Apr 2018
Location: SF Bay Area
Posts: 691
|
Did they paint or wrap the chrome outter part of the bowtie? I like it being color matched.
__________________
YOUTUBE CHANNEL: Mr2Hard2See
LSA blower BTR stg 2 cam 227/242 BTR dual springs pushrods lifters retainers etc Che bronze trunnion Ls3 timing/valley cover Dod/vvt delete Dsx e85 Dsx aux fuel pump Id1050x injectors ZL1 fuel pump, Griptech 2.55 pulley, Solo performance Mach ll 2.5 catback exhaust 1 7/8th Lt headers |
05-31-2018, 08:27 PM | #362 |
|
Painted Inferno Orange Metallic!
__________________
Instagram @orange_maro_
|
05-31-2018, 09:19 PM | #363 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,688
|
Full race mode ;o)
-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
06-01-2018, 03:37 PM | #364 |
|
6 weeks to finish A LOT of work before camaro fest!
__________________
Instagram @orange_maro_
|
|
|
Thread Tools | |
|
|