IPS Camaro

[Boost6924]

Mine is lowered too, and if i drive in to my driveway too fast bolts will scrape the ground. No big issue, i will find some recessed bolts too. I will let ips know about the bolts too. As long as you don't try to run over speed bumps 80 miles per hour you are fine.

[Blk_SS]

i remember this car!! i was at the shop when i took my car there for a tune from Allen

[Boost6924]

Originally Posted by Blk_SS

i remember this car!! i was at the shop when i took my car there for a tune from Allen

Lol, it will be back there this fall for a new engine install and some other goodies. Goal is to add about 400RWHP to it.

[SUX2BU]

Originally Posted by CyberPredator

Low. Like IPS stated the turbos are only about 3/4" lower than the sub frame but the skid plate is 2-3" lower than the turbos and the bolt head are almost another inch. This weekend I'm gonna get it in the air and see if I can find a bolt at the hardware store or Lowes that is more recessed.

So the lowest part of this kit is about 3 1/2" - 4 1/2" lower than the sub frame? EEEK! well there goes this idea for my car. My car's sub frame is only about 3 1/4" off the ground.

[Detoxx03]

Originally Posted by Boost6924

Lol, it will be back there this fall for a new engine install and some other goodies. Goal is to add about 400RWHP to it.

I'm sure he was referring to Cyber Predator

[Boost6924]

Originally Posted by SUX2BU

So the lowest part of this kit is about 3 1/2" - 4 1/2" lower than the sub frame? EEEK! well there goes this idea for my car. My car's sub frame is only about 3 1/4" off the ground.

No, it is not that low. When i get back home from my trip, i will take the exact measurement from lowest part (skid plate bolts) to the ground.
Mine is lowered about 1 1/2 to 2 inches. Only place i managed to scrape the ground so far is my own driveway. Our driveways are screwed, my neighbors 2009 z-06 is having hard time with stock suspension, he scrapes ground all the time. My son's SS Cobalt scrapes the front lip with stock suspension.
Not saying there is not kits that gives you better clearance (Granatelli perhaps) but ips set up is not an issue for me.

[Boost6924]

Originally Posted by Detoxx03

I'm sure he was referring to Cyber Predator

My bad....

[SUX2BU]

Originally Posted by Boost6924

No, it is not that low. When i get back home from my trip, i will take the exact measurement from lowest part (skid plate bolts) to the ground.
Mine is lowered about 1 1/2 to 2 inches. Only place i managed to scrape the ground so far is my own driveway. Our driveways are screwed, my neighbors 2009 z-06 is having hard time with stock suspension, he scrapes ground all the time. My son's SS Cobalt scrapes the front lip with stock suspension.
Not saying there is not kits that gives you better clearance (Granatelli perhaps) but ips set up is not an issue for me.

Yeah, that seems really low. Do me a solid and measure from the ground to your subframe also.

[CyberPredator]

Originally Posted by Boost6924

No, it is not that low. When i get back home from my trip, i will take the exact measurement from lowest part (skid plate bolts) to the ground.
Mine is lowered about 1 1/2 to 2 inches. Only place i managed to scrape the ground so far is my own driveway. Our driveways are screwed, my neighbors 2009 z-06 is having hard time with stock suspension, he scrapes ground all the time. My son's SS Cobalt scrapes the front lip with stock suspension.
Not saying there is not kits that gives you better clearance (Granatelli perhaps) but ips set up is not an issue for me.

I don't know mine has hit quite a few times in big driveways going slow. it always hits the bolts. But I think the soft stock suspension has alot to do with it. I think the front is sagging a bit under the weight of the kit, I can have a pic posted up this weekend if you like....but seeing as how you have the kit you probably dont need it lol.

[Boost6924]

Originally Posted by SUX2BU

Yeah, that seems really low. Do me a solid and measure from the ground to your subframe also.

Will do. I will be back home Monday.

[Boost6924]

Originally Posted by CyberPredator

I don't know mine has hit quite a few times in big driveways going slow. it always hits the bolts. But I think the soft stock suspension has alot to do with it. I think the front is sagging a bit under the weight of the kit, I can have a pic posted up this weekend if you like....but seeing as how you have the kit you probably dont need it lol.

Shoot me a picture, so we can compare. our kits supposed to come from same jig, but some real world comparision is always helpful. PM me, and i will give you my e-mail.

[CyberPredator]

Ok will do. It's storming here but when it clears up i'll definitely do it

[ipimpthisc]

Just got my injectors for ips kit...lets see how this goes.....finally I can arrange for the build to happen

[Boost6924]

Originally Posted by ipimpthisc

Just got my injectors for ips kit...lets see how this goes.....finally I can arrange for the build to happen

Keep us posted.