05-04-2020, 10:17 PM | #1 |
Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,190
|
ZL1 Absorber tabs for diffuser
Anyone happen to have these 4 tabs laying around? Part numbers:
22743862, 22743863, 22743864, 22743865. Gen5DIY and everywhere i called doesnt have them. Discontinued. Tried GMPartsGiant and they cancelled the order (even though they claim purchase now).
__________________
•2011 Camaro SS 2SS/RS A6
•MRR M017 1le Replica Wheels •Vararam Ram Air Intake •Speed Engineering Longtube Headers w/ Magnaflow HF Cats •Bo White PnP Stage 2 TB •GPI SS2 VVT Cam w Cometic thin gaskets 10.69 compression •Xpipe w/ Res Delete and NPP Exhaust •Tuned By Anonymous Calibrations •Gen5DIY Mylink Conversion W/ Backup Cam •Morel 3 way custom speakers, Infinity 860w Subwoofers in trunk baffle •Helix P6 6ch amp w/ 8ch DSP and P1 Sub amp |
07-31-2020, 11:51 AM | #2 |
Drives: CHEVROLET 2010 2SS CAMARO Join Date: Jul 2020
Location: Whiting,IN
Posts: 3
|
Have any luck finding these parts? I really want to install the ZL1 diffuser on my 5th gen.
|
07-31-2020, 12:15 PM | #3 |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
where do these go ive never seen them and have 2 zl1's
|
07-31-2020, 01:52 PM | #4 |
Drives: CHEVROLET 2010 2SS CAMARO Join Date: Jul 2020
Location: Whiting,IN
Posts: 3
|
These are outer and inner lower cover brackets for the Zl1 absorber I think. I’m trying to upgrade my 2010 SS diffuser to the ZL1, but I’m not having luck finding these parts.
|
07-31-2020, 11:24 PM | #5 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Gotta find someone with a wrecked ZL1 more than likely
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
08-01-2020, 10:06 AM | #6 |
Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,190
|
Never found them. They really are not needed. i put the diffuser on and the bolts ligned up just fine with a small bit of finess. No warping or anything.
__________________
•2011 Camaro SS 2SS/RS A6
•MRR M017 1le Replica Wheels •Vararam Ram Air Intake •Speed Engineering Longtube Headers w/ Magnaflow HF Cats •Bo White PnP Stage 2 TB •GPI SS2 VVT Cam w Cometic thin gaskets 10.69 compression •Xpipe w/ Res Delete and NPP Exhaust •Tuned By Anonymous Calibrations •Gen5DIY Mylink Conversion W/ Backup Cam •Morel 3 way custom speakers, Infinity 860w Subwoofers in trunk baffle •Helix P6 6ch amp w/ 8ch DSP and P1 Sub amp |
|
|
|
|