Automatic transmission shifter assembly removal - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Hockeysbest · 10-18-2018, 09:28 AM

As I was installing a new Alpine in my 2013 ZL1, I broke off the plastic, spring loaded mechanism that is attached to the shifter stem and covered by the shifter knob. After extensive web searching for the plastic piece, all I could locate was the whole shifter assembly (part #22894722) which houses the plastic mechanism. Has anyone repaced this assembly and if so, can it be done through the console without going underneath the car? Also, not sure how to remove the assembly as there are 4 pins without a hexhead securing the assembly to the transmission.
Much thanks for any help! I have to think this must have happened to other folks

1970judge · 10-18-2018, 09:48 AM

Probably very little help for you here, as this is the Z/28 section and none of them are automatics.

Hockeysbest · 10-18-2018, 09:50 AM

Yikes! Thanks for the info. Will move this to another forum. Thought this was for ZL1s too.

1970judge · 10-18-2018, 09:53 AM

Try the ZL1 section, chances are someone there can help!

joelster · 10-19-2018, 03:34 PM

What's this "automatic" thing you speak of?

2SSRS@Gen5diy · 10-19-2018, 03:58 PM

Its a 2014 with that a shop replaced the M6 for an auto trans.

4 FN 27 · 10-19-2018, 07:29 PM

Quote:

Originally Posted by joelster

What's this "automatic" thing you speak of?

Yes what is this?

Think I have seen one of them. Has a mystery donut filled with red jelly in front of it????

10-18-2018, 09:28 AM	#1
Hockeysbest Drives: 2013 Black ZL 1 Join Date: Apr 2016 Location: Colorado Posts: 16	Automatic transmission shifter assembly removal As I was installing a new Alpine in my 2013 ZL1, I broke off the plastic, spring loaded mechanism that is attached to the shifter stem and covered by the shifter knob. After extensive web searching for the plastic piece, all I could locate was the whole shifter assembly (part #22894722) which houses the plastic mechanism. Has anyone repaced this assembly and if so, can it be done through the console without going underneath the car? Also, not sure how to remove the assembly as there are 4 pins without a hexhead securing the assembly to the transmission. Much thanks for any help! I have to think this must have happened to other folks

10-18-2018, 09:53 AM	#4
1970judge Drives: 2015 Z/28, 2007 HHR Join Date: Jan 2014 Location: Republic of Texas Posts: 1,148	Try the ZL1 section, chances are someone there can help! Attached Images

10-19-2018, 03:34 PM	#5
joelster Drives: '94 Z28+ '15 Z/28 Join Date: Jun 2009 Location: Cheektowaga, NY Posts: 1,281	What's this "automatic" thing you speak of? __________________ 1973 Mach 1, 351C cruiser '15 Z/28 Red Hot, A/C 1980 Z28- resto-mod project 1979 Y84 Trans Am 1986 IROC-Z

10-18-2018, 09:48 AM	#2
1970judge Drives: 2015 Z/28, 2007 HHR Join Date: Jan 2014 Location: Republic of Texas Posts: 1,148	Probably very little help for you here, as this is the Z/28 section and none of them are automatics.

10-18-2018, 09:50 AM	#3
Hockeysbest Drives: 2013 Black ZL 1 Join Date: Apr 2016 Location: Colorado Posts: 16	Yikes! Thanks for the info. Will move this to another forum. Thought this was for ZL1s too.

10-19-2018, 03:58 PM	#6
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Its a 2014 with that a shop replaced the M6 for an auto trans.