You are browsing camaro5 
 |
|
06-13-2018, 06:13 PM
|
#1 |
 Drives: 2015 2SS 1LE Join Date: Dec 2016
Location: Indianapolis
Posts: 116
|
Nitrous dual bottle setup
I have been reading up and haven’t gotten a clear consensus on running a dual bottle setup. I have a nitrous outlet plate kit, running a 150 shot and am going to have two bottles in the trunk. Some have said that running a dual setup with both bottles open is good, while I have also heard that running a single is better. I’m talking about maintaining pressure throughout the run.
What’s your thoughts, or experience?
__________________
505/465: 416 stroker, landspeed stg 3 heads, 10.5 compression, btr stg 3 stroker cam, E85, kooks 1-7/8" headers,k&n intake,vmaxx tb,mgw,rxt,bmr 1.5" drop springs,bmr poly cradle bushings,bmr toe rods,bmr trailing arms,bmr uca,bmr diff bushings
|
|
|
|
06-14-2018, 08:50 AM
|
#2 |
|
"Old School"
Drives: 2010 2SS L99 Join Date: Apr 2015
Location: Sherrills Ford, NC
Posts: 1,295
|
A 150 shot should be good with one bottle, I would think you should be able to get 5 (1/4) mile runs on a full 10 lb bottle. I run a 125 shot without a problem and get 8 (1/8) mile runs usually. I refill when I have 3 or 4 pounds left in the bottle. Bottle temperature is critical and needs to be at 90*F.
|
|
|
|
|
06-14-2018, 08:56 AM
|
#3 |
       
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
if you're worried about losing pressure, get a pusher system. maintains bottle pressure until the last drop.
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
|
|
|
|
06-14-2018, 09:15 AM
|
#4 |
|
Drives: 2015 2SS 1LE Join Date: Dec 2016
Location: Indianapolis
Posts: 116
|
thanks guys. running one bottle at a time, makes the setup/install a little easier.
__________________
505/465: 416 stroker, landspeed stg 3 heads, 10.5 compression, btr stg 3 stroker cam, E85, kooks 1-7/8" headers,k&n intake,vmaxx tb,mgw,rxt,bmr 1.5" drop springs,bmr poly cradle bushings,bmr toe rods,bmr trailing arms,bmr uca,bmr diff bushings
|
|
|
|
|
06-17-2018, 11:04 PM
|
#5 |
|
Drives: 2015 2SS 1LE Join Date: Dec 2016
Location: Indianapolis
Posts: 116
|
Installed my bottle bracket today!!
__________________
505/465: 416 stroker, landspeed stg 3 heads, 10.5 compression, btr stg 3 stroker cam, E85, kooks 1-7/8" headers,k&n intake,vmaxx tb,mgw,rxt,bmr 1.5" drop springs,bmr poly cradle bushings,bmr toe rods,bmr trailing arms,bmr uca,bmr diff bushings
|
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
