08-30-2017, 07:51 PM | #1 |
Drives: 2011 Camaro SS Join Date: Jun 2017
Location: Arlington
Posts: 1
|
zl1 front bumper conversion question
I recently bought a front zl1 bumper, absorber and fog light bezels to do a zl1 front bumper conversion. I need to know how to mount the fog lights and my running lights in the bumper. There's nothing to mount the lights to.
|
09-16-2017, 05:47 PM | #2 |
Drives: 2010 2SS/RS L99 IBM silver stipes Join Date: Dec 2015
Location: K.C. Kansas
Posts: 1,329
|
You need the fog light bezel
__________________
2010 Imperial Blue w/ Silver stripes 2SS/RS L99
Mods = Not enough.... |
11-17-2017, 09:39 PM | #3 |
Drives: 2012 camaro 2LS Join Date: Nov 2016
Location: Florida
Posts: 101
|
for the bottom fog lights. i just pushed them into the bezel while on the bumper. snaps right in...
__________________
3.91 Gears, Ported Intake Manifold, Intake Manifold Spacer, 80mm Throttle Body, Cold Air Inductions Intake, Trifecta Tune, Solo HighFlow Cats, BBK 2.5"Xpipes, ZL1 Mufflers, Forgestar F14 wheels
250lb weight reduction !!! |
11-17-2017, 09:41 PM | #4 |
Drives: 2012 camaro 2LS Join Date: Nov 2016
Location: Florida
Posts: 101
|
on the bottom side of the bumper there are some holes. what do i use to hold the bumper and the protector piece? i used the factory bumper clips but they fall off. thanks
__________________
3.91 Gears, Ported Intake Manifold, Intake Manifold Spacer, 80mm Throttle Body, Cold Air Inductions Intake, Trifecta Tune, Solo HighFlow Cats, BBK 2.5"Xpipes, ZL1 Mufflers, Forgestar F14 wheels
250lb weight reduction !!! |
|
|
|
|