Planning a new exhaust

[1JEWLDSSRS]

Originally Posted by Silver14

That Magnaflow is just a muffler/resonator that you could add to the factory H pipe or whatever H/X pipe you go with. It should reduce volume and drone.

Might be the most economical solution if you add it to your car and like it before changing everything else.

It is a resonated X-pipe, if you cut it open and check it out.

[Silver14]

https://www.magnaflow.com/products/1...rmance-muffler

Magnaflow calls it a muffler I think most refer to a perforated tube in a canister as a muffler, regardless of the internal shape. When I hear H or X pipe, I think of the entire assemble from cats to axleback.

Either way, the point I was trying to make was OP can use that product or similar to reduce volume and drone without changing anything else on the car.

[Modernmusclecar]

Originally Posted by Silver14

https://www.magnaflow.com/products/1...rmance-muffler

Magnaflow calls it a muffler I think most refer to a perforated tube in a canister as a muffler, regardless of the internal shape. When I hear H or X pipe, I think of the entire assemble from cats to axleback.

Either way, the point I was trying to make was OP can use that product or similar to reduce volume and drone without changing anything else on the car.

I used it a few years ago. It cut volume by at least 40%.It did have a nice low tone. To quite for my strait piped setup with shorties. Put a Flowmaster Super 10 in its place. Sounded good....then said screw it and went Cor as. I was sick of fooling around with exhaust.

[RupertPupkin]

Originally Posted by SSkat

I would say Speed Engineering. You 3" exhaust, dual tips and it only costs $600. I cant comment on drone though.

Considering those are bullet style mufflers, they will drone like hell.