06-13-2017, 10:02 AM | #1 |
Drives: 2009 Pontiac G8 GXP Join Date: Jun 2012
Location: Lodi, CA
Posts: 22
|
Racing Brake two piece rotor group buy
Hey guys anyone interested in a group buy for light weight Racing Brake two piece front and rear rotors. They seem to be the only company who makes two piece rear rotors.
Thanks Tom |
06-13-2017, 11:53 AM | #2 |
Go fast, please.
|
I have the front and rear set from them and they are very nice looking (which is what I was going for) I don't notice any additional stopping power but they are pretty lol.
Anyone who may be interested in these just know that their customer service SUCKS. The worst I've ever dealt with and if they weren't the only reasonable makers of rear 2 piece rotors I would NOT have bought from them. They don't care about problems with their products once they are shipped and they in general don't seem to care much about their customers. Just a heads up. If you are like me and you want the rear 2 piece rotors you'll deal with the crap that comes from their customer service just like I did. |
06-13-2017, 11:58 AM | #3 |
Drives: 2009 Pontiac G8 GXP Join Date: Jun 2012
Location: Lodi, CA
Posts: 22
|
Yeah my stock six piston Brembo rotors are worn and need replacing. I plan to track my car this summer and having two piece all around makes sense for replacement. Also the added weight savings is a plus.
|
06-13-2017, 01:46 PM | #4 |
Sarcasm loading --------
|
whats the target price range?
__________________
"The salesman actually told me to stop getting it sideways during the test drive"
2018 MBM ZL1 1LE - Stock 2014 CRT ZL1 574 rwhp, 537 rwtq - SOLD 2010 IBM SS Camaro VVT L99 w/ TR6060 swap, 489 rwhp, 444 rwtq - SOLD |
06-13-2017, 02:20 PM | #5 |
KaBoom1701
Drives: 13' ZL1 Red M6 Join Date: Dec 2012
Location: I.E. SoCal (Yucaipa)
Posts: 8,630
|
Price and weight saving over OEM would be nice to know....
__________________
Mods:
Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats. |
06-13-2017, 02:33 PM | #6 |
Drives: 2009 Pontiac G8 GXP Join Date: Jun 2012
Location: Lodi, CA
Posts: 22
|
Here's the weight comparison from RB website
Weight Comparisons: FRONT REAR Size (mm) Wt (lbs) Size (mm) Wt (lbs) OE One-piece Rotor 370x34 25.5 365x28 24 RB Two-piece Rotor 370x34 23.5 365x28 18 |
06-14-2017, 07:44 AM | #7 | |
Drives: 2013 ZL1 M6 Join Date: Sep 2016
Location: CA Bay Area
Posts: 248
|
Quote:
__________________
Fast 850cc Injectors, ATI Balancer, 8.66 Lower Pulley, 2.55 Upper Pulley, Lingenfelter CAI, Kooks LT with cat delete pipes, Noweeds Exhaust Cutouts (extremely loud under full throttle), BTR Stage 3 Cam, BTR Platinum 660 Valve Spring Kit, TR7ix Iridium Spark Plugs, Lingenfelter Solid Isolator, 160 Degree Thermostat, Larger SC Coolant Reservoir with Hose Relocation Kit, BMR 1.25" Lowering Springs, MGW Short Throw Shifter, Racing Brake 2 piece rotors front and rear, Starkweather Performance Custom Dyno Tune on 91 Octane.
691.38 RWHP 630.35 RWTQ |
|
06-14-2017, 08:52 AM | #8 |
Drives: 2013 White ZL1 coupe 682hp/672tq Join Date: Sep 2015
Location: Isle of Wight VA
Posts: 134
|
I'm in if the price point is right
|
06-14-2017, 10:17 AM | #9 |
Drives: 2013 ZL1 M6 Join Date: Sep 2016
Location: CA Bay Area
Posts: 248
|
Just so everyone knows it was about $3000 for front and rear rotors with a set of street pads, a set of track pads and 2 bottles of Motul brake fluid.
__________________
Fast 850cc Injectors, ATI Balancer, 8.66 Lower Pulley, 2.55 Upper Pulley, Lingenfelter CAI, Kooks LT with cat delete pipes, Noweeds Exhaust Cutouts (extremely loud under full throttle), BTR Stage 3 Cam, BTR Platinum 660 Valve Spring Kit, TR7ix Iridium Spark Plugs, Lingenfelter Solid Isolator, 160 Degree Thermostat, Larger SC Coolant Reservoir with Hose Relocation Kit, BMR 1.25" Lowering Springs, MGW Short Throw Shifter, Racing Brake 2 piece rotors front and rear, Starkweather Performance Custom Dyno Tune on 91 Octane.
691.38 RWHP 630.35 RWTQ |
06-14-2017, 11:58 AM | #10 |
Go fast, please.
|
|
06-14-2017, 12:26 PM | #11 |
Drives: 2013 White ZL1 coupe 682hp/672tq Join Date: Sep 2015
Location: Isle of Wight VA
Posts: 134
|
|
06-14-2017, 12:27 PM | #12 |
Drives: 2013 White ZL1 coupe 682hp/672tq Join Date: Sep 2015
Location: Isle of Wight VA
Posts: 134
|
RB Two-piece Rotor Kit for Camaro ZL1 and Cadillac CTS-V 09-14 (P/N 2160 & 2140)
Our Price: $2,530.00 Sale Price: $2,277.00 You save $253.00! Update Price Note: GM-IRK-04 Size: See below Rotor Wt (lbs.): See below Product Code: GM-IRK-04 RB-Brake Pad XT910 - Street (PD1291-391 & PD592-391) [Included in price] XT960 - Spirited (PD1405-396 & PD592-396) [Add $133.00] Qty: Add to cart Add To Wish List |
06-14-2017, 12:33 PM | #13 |
Drives: 2013 White ZL1 coupe 682hp/672tq Join Date: Sep 2015
Location: Isle of Wight VA
Posts: 134
|
|
06-14-2017, 03:11 PM | #14 |
Drives: 2013 ZL1 M6 Join Date: Sep 2016
Location: CA Bay Area
Posts: 248
|
That was what I paid for the rotors plus 1 set of pads. Add in the set of track pads, 2 bottles of brake fluid and $213 in tax and you get $3000. It adds up quick.
__________________
Fast 850cc Injectors, ATI Balancer, 8.66 Lower Pulley, 2.55 Upper Pulley, Lingenfelter CAI, Kooks LT with cat delete pipes, Noweeds Exhaust Cutouts (extremely loud under full throttle), BTR Stage 3 Cam, BTR Platinum 660 Valve Spring Kit, TR7ix Iridium Spark Plugs, Lingenfelter Solid Isolator, 160 Degree Thermostat, Larger SC Coolant Reservoir with Hose Relocation Kit, BMR 1.25" Lowering Springs, MGW Short Throw Shifter, Racing Brake 2 piece rotors front and rear, Starkweather Performance Custom Dyno Tune on 91 Octane.
691.38 RWHP 630.35 RWTQ |
|
|
|
|