Will the new camaro LLT fit in a 94 camaro v6? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

vbchiropractor · 01-16-2011, 10:45 AM

I came up with this question after reading how difficult and none cost effective it is to swap a V8 into a 94 V6 camaro. So will it work, should I upgrade the transmission etc... let me know what you think.

KMPrenger · 01-16-2011, 06:51 PM

Just a guess, but I can't see it being any cheaper or less difficult to swap the new LLT in a 94 than it would be to swap in an LT1.

DevilKnightFalcon · 01-16-2011, 10:51 PM

Quote:

Originally Posted by KMPrenger

Just a guess, but I can't see it being any cheaper or less difficult to swap the new LLT in a 94 than it would be to swap in an LT1.

+1 with the kind of money you are gonna spend doing that why not just save it and put it towards a down payment on a 2012 or something.

*The_Blur* · 01-16-2011, 11:13 PM

This could be a great project. I'd love to see this done.

Mankind · 01-16-2011, 11:24 PM

Would be kool to see but, again, for the price....

It would take someone to make a wire harness in order to attempt it. The engine computer uses an OBD system and the 94 didn't. Not real sure about the tranny bolting up either.

I would opt for the LT1 before the LLT.

esfkotaro · 01-17-2011, 04:23 AM

I have no idea, but I too would love to see this done.A lot of people will say "not worth it, blah blah blah." But it's hard to put a price on quality originality. Not everyone needs to do the same thing everyone else has already done.

usa1camaro1969 · 01-17-2011, 07:20 AM

Engine, transmission, computer, harness, and driveshaft. Can it be done? Yes. Cheaper than an LT1 or LS-series? I'd say not right now. You'd probably spend more than what some of the LT1 cars are going for right now.

xpanda305x · 01-17-2011, 10:05 AM

LSX454

vbchiropractor · 01-19-2011, 08:48 AM

Thanks for the input, this is still in the hmmmm could i do this stage. This car is my daily driver and has 182,000 on it and still runs great. So this question is part of a future overhaul plan I have for this car. Whether I acctually get to do it or not remains to be seen, only time will tell.

01-16-2011, 10:45 AM	#1
vbchiropractor Drives: 94 camaro Join Date: Jan 2011 Location: virginia beach Posts: 11	Will the new camaro LLT fit in a 94 camaro v6? I came up with this question after reading how difficult and none cost effective it is to swap a V8 into a 94 V6 camaro. So will it work, should I upgrade the transmission etc... let me know what you think.

01-16-2011, 06:51 PM	#2
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,943	Just a guess, but I can't see it being any cheaper or less difficult to swap the new LLT in a 94 than it would be to swap in an LT1. __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

01-16-2011, 11:13 PM	#4
The_Blur Moderator Drives: 2018 Harley-Davidson Street Bob Join Date: Nov 2007 Location: San Diego Posts: 14,769	This could be a great project. I'd love to see this done. __________________ RDP Motorsport//GEN5DIY//Cultrag Performance//JPSS//Rodgets Chevrolet// Operation Demon//Buy at Invoice//RACECARWEAR RESPECT ALL CARS. LOVE YOUR OWN. warn 145:159 ban

01-17-2011, 04:23 AM	#6
esfkotaro Drives: 2010 Camaro LS M6, Black with CGM Join Date: Feb 2010 Location: NJ Posts: 93	I have no idea, but I too would love to see this done.A lot of people will say "not worth it, blah blah blah." But it's hard to put a price on quality originality. Not everyone needs to do the same thing everyone else has already done. __________________ 2010 Camaro LS M6, Black with CGM Stripes MRTv2 :: Injen CAI Factory Spoiler Added Coming soon (end of summer, hopefully): JBA Shorties :: Hurst or MTI Shifter (undecided) New 20" Wheels (undecided) :: Fogs :: GFX :: CF Heat Extractor hood :: Painted-On CGM Stripes :: G-2 Painted Calipers :: Painted Bowties

01-17-2011, 07:20 AM	#7
usa1camaro1969 Back on the dino-juice Drives: '10 LS + a few more Join Date: May 2010 Location: Texas Posts: 1,641	Engine, transmission, computer, harness, and driveshaft. Can it be done? Yes. Cheaper than an LT1 or LS-series? I'd say not right now. You'd probably spend more than what some of the LT1 cars are going for right now. __________________ I wake up in the morning and I piss excellence. -Ricky Bobby America is all about speed. Hot, nasty, badass speed. -Eleanor Roosevelt, 1936

01-16-2011, 11:24 PM	#5
Mankind Whats a Millwright? Drives: 2LT/RS SIM, 05 Wht Denali Join Date: Feb 2010 Location: Holden, LA Posts: 410	Would be kool to see but, again, for the price.... It would take someone to make a wire harness in order to attempt it. The engine computer uses an OBD system and the 94 didn't. Not real sure about the tranny bolting up either. I would opt for the LT1 before the LLT.

01-17-2011, 10:05 AM	#8
xpanda305x Banned Drives: Dark Knight Join Date: Nov 2009 Location: Gunshine State Posts: 3,150 View My Garage	LSX454

01-19-2011, 08:48 AM	#9
vbchiropractor Drives: 94 camaro Join Date: Jan 2011 Location: virginia beach Posts: 11	Thanks for the input, this is still in the hmmmm could i do this stage. This car is my daily driver and has 182,000 on it and still runs great. So this question is part of a future overhaul plan I have for this car. Whether I acctually get to do it or not remains to be seen, only time will tell.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	66	04-22-2024 11:41 AM
V6 Camaro Performance Upgrades	rtcat600man	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	387	09-19-2019 06:53 PM
Think about this and the Z28 5th gen	13F20	Camaro ZL1 Forum - ZL1 Specific Topics	41	09-04-2010 12:59 AM
Installation Camaro Needed for Manual for a Justice Install Package in SF Bay Area	Info@PeddersUSA.com	USA - California	6	04-30-2010 08:02 PM