Black Diamond 20’s - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

General Tsou’s Chicken · 11-29-2020, 10:05 AM

So I just ordered the BD 21. The front is 9 width and the back is 10.5. I also went 275 on the front tires and 315 on the back. I wanted an aggressive look but I have a feeling I might be disappointed. Does anyone know much about these? They also have the Black Diamond 15, 10 width front and 11 width back.

1JEWLDSSRS · 11-29-2020, 05:41 PM

lol, I almost went with those wheels, they are saved in my favorites. But then I went searching and found the Ferrada FR3's and went with them instead. The BD's are a good looking wheel though, should look nice.

byrds8 · 11-30-2020, 09:21 AM

I think the Ferrada look better myself. From what bit I could find, looks like the BD-21 weigh about as much as stock wheels. Doesn't seem that they like to publish weights too often on any of these lol. Wish the previous owner would have gotten the Fr3 vs Fr8 for my ride. Would have been easier to clean.

1JEWLDSSRS · 11-30-2020, 11:30 AM

The main reason I didn't get the BD21's is how the spokes connected to the wheel edges, they poked out past the edge and that could cause a problem if you accidently got to close to a curb.

byrds8 · 11-30-2020, 11:47 AM

So true.

General Tsou’s Chicken · 11-30-2020, 07:57 PM

Unfortunately I just found out they don’t have the BD-21 in stock��. So I switched to BD-15 with front width 10 and back 11. I like the Ferrada FR3's but they’re a lot more than I planned to spend.

byrds8 · 12-01-2020, 07:32 AM

IMHO those look better than the others.

11-29-2020, 10:05 AM	#1
General Tsou’s Chicken Drives: Chevy Camaro Join Date: Apr 2020 Location: Maryland Posts: 42	Black Diamond 20’s So I just ordered the BD 21. The front is 9 width and the back is 10.5. I also went 275 on the front tires and 315 on the back. I wanted an aggressive look but I have a feeling I might be disappointed. Does anyone know much about these? They also have the Black Diamond 15, 10 width front and 11 width back.

11-29-2020, 05:41 PM	#2
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 3,228	lol, I almost went with those wheels, they are saved in my favorites. But then I went searching and found the Ferrada FR3's and went with them instead. The BD's are a good looking wheel though, should look nice. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200 CONVERTER,LOD INTAKE. 486RWTQ/475RWHP.LOTS MORE.

11-30-2020, 09:21 AM	#3
byrds8 Drives: 2013 Camaro 2SS, L99 Join Date: Jun 2017 Location: Florida Posts: 441 View My Garage	I think the Ferrada look better myself. From what bit I could find, looks like the BD-21 weigh about as much as stock wheels. Doesn't seem that they like to publish weights too often on any of these lol. Wish the previous owner would have gotten the Fr3 vs Fr8 for my ride. Would have been easier to clean. __________________ 2013 Camaro SS/RS, Stainless Power long tube headers with HF's, Air Raid CAI, Solo Mach XL cat back, BC Racing coil overs, Elite Engineering catch can, Ferrada Forge 8 Wheels, Windows tinted at 20%, Tuned by Dyno Steve.

11-30-2020, 11:30 AM	#4
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 3,228	The main reason I didn't get the BD21's is how the spokes connected to the wheel edges, they poked out past the edge and that could cause a problem if you accidently got to close to a curb. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200 CONVERTER,LOD INTAKE. 486RWTQ/475RWHP.LOTS MORE.

11-30-2020, 11:47 AM	#5
byrds8 Drives: 2013 Camaro 2SS, L99 Join Date: Jun 2017 Location: Florida Posts: 441 View My Garage	So true. __________________ 2013 Camaro SS/RS, Stainless Power long tube headers with HF's, Air Raid CAI, Solo Mach XL cat back, BC Racing coil overs, Elite Engineering catch can, Ferrada Forge 8 Wheels, Windows tinted at 20%, Tuned by Dyno Steve.

11-30-2020, 07:57 PM	#6
General Tsou’s Chicken Drives: Chevy Camaro Join Date: Apr 2020 Location: Maryland Posts: 42	Unfortunately I just found out they don’t have the BD-21 in stock��. So I switched to BD-15 with front width 10 and back 11. I like the Ferrada FR3's but they’re a lot more than I planned to spend.

12-01-2020, 07:32 AM	#7
byrds8 Drives: 2013 Camaro 2SS, L99 Join Date: Jun 2017 Location: Florida Posts: 441 View My Garage	IMHO those look better than the others. __________________ 2013 Camaro SS/RS, Stainless Power long tube headers with HF's, Air Raid CAI, Solo Mach XL cat back, BC Racing coil overs, Elite Engineering catch can, Ferrada Forge 8 Wheels, Windows tinted at 20%, Tuned by Dyno Steve.