First C7 clutch in a C6! - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

*TAG UR IT* · 02-04-2014, 10:35 PM

I'm asking as well. Sent a PM earlier. My clutch is about to go...screeching like crazy. I press in the clutch and the noise is gone. Release it and it's back....over and over. This is my daily driver and I need it badly... PM me a price please. Maybe I can pick it up to save time as I've got to do something to get me back on the road quickly. Any help would be greatly appreciated!

Thanks!

DKT · 02-04-2014, 11:00 PM

Steve will get you hooked up!

10 2SS/RS 6M · 02-05-2014, 08:51 AM

Quote:

Originally Posted by TAG UR IT

I'm asking as well. Sent a PM earlier. My clutch is about to go...screeching like crazy. I press in the clutch and the noise is gone. Release it and it's back....over and over. This is my daily driver and I need it badly... PM me a price please. Maybe I can pick it up to save time as I've got to do something to get me back on the road quickly. Any help would be greatly appreciated!

Thanks!

That's definitely your throw-our bearing making the noise, an it will fail at any time. Time for a new one, and definitely get that stock clutch out of there if it is your stock one.
I installed The Monster Clutch Co. LT1-S twin and couldn't be happier!
Had the same problem,twice before that!
I didn't do it the 1st time. Warranty covered it.
Steve will take care of you if your considering a Monster clutch.

Steve@SNL/Monster Clutch · 02-05-2014, 03:44 PM

Quote:

Originally Posted by TAG UR IT

I'm asking as well. Sent a PM earlier. My clutch is about to go...screeching like crazy. I press in the clutch and the noise is gone. Release it and it's back....over and over. This is my daily driver and I need it badly... PM me a price please. Maybe I can pick it up to save time as I've got to do something to get me back on the road quickly. Any help would be greatly appreciated!

Thanks!

Sorry about the delay, I'm replying to the PM!

Quote:

Originally Posted by Jered@DKT

Steve will get you hooked up!

Thanks Jered!

Quote:

Originally Posted by 10 2SS/RS 6M

That's definitely your throw-our bearing making the noise, an it will fail at any time. Time for a new one, and definitely get that stock clutch out of there if it is your stock one.
I installed The Monster Clutch Co. LT1-S twin and couldn't be happier!
Had the same problem,twice before that!
I didn't do it the 1st time. Warranty covered it.
Steve will take care of you if your considering a Monster clutch.

Thanks a ton for the kind words George!!!!!!!

K1SSRSS · 02-05-2014, 09:14 PM

Can I get a price on the lt1-s and lt1-sc kits? Thanks

Jason 98 TA · 02-06-2014, 10:48 AM

Good job guys

Steve@SNL/Monster Clutch · 02-07-2014, 06:15 PM

Quote:

Originally Posted by K1SSRSS

Can I get a price on the lt1-s and lt1-sc kits? Thanks

PM heading your way!

Quote:

Originally Posted by Jason 98 TA

Good job guys

Thanks Jason!

If you guys need one give me a shout, we not only use these for the Camaro's, etc. we also modify/build them for the C7's! We've got one heading to Vengeance for their beast as well as one going to LMR for theirs!

Steve@SNL/Monster Clutch · 02-10-2014, 09:40 AM

Bumping this for guys asking about them.

We had two cars out at the track last night... not 5th gens but both had these clutches and cut some damn good 60's/times!!!

onebad1le · 01-12-2015, 11:21 PM

I just had 510 race order me LT1-R with 18lbs option flywheel and billet support
and will be doing a review of this clutch and dyno compared to my old clutch
that couldn't take the power. also track 60 ft when weather gets better.

Steve@SNL/Monster Clutch · 01-13-2015, 03:10 PM

Quote:

Originally Posted by onebad1le

I just had 510 race order me LT1-R with 18lbs option flywheel and billet support
and will be doing a review of this clutch and dyno compared to my old clutch
that couldn't take the power. also track 60 ft when weather gets better.

Awesome!!! Let us know how you like it.

02-05-2014, 09:14 PM	#75
K1SSRSS Chief Many Camaros Drives: A paid off Camaro!!! Join Date: Mar 2009 Location: Las Cruces, NM Posts: 1,863 View My Garage	Can I get a price on the lt1-s and lt1-sc kits? Thanks __________________ 504hp/478tq Performance: Kooks LT, 3'' Exhaust, V-Max TB, Roto-Fab CAI, Custom Ported/Port Matched Heads and Intake Suspension: BMR Adjustable LCA's, BMR Trailing Arms, Poly Bushings, BMR Toe Rods Coming Soon (still in the box): Procharger F1R, G-Force Axles, 3:91 gears w/Eaton Truetrac

01-12-2015, 11:21 PM	#79
onebad1le Account Suspended Drives: 2013 1le Join Date: Nov 2012 Location: houston Posts: 459	just had shop order clutch LT1-R I just had 510 race order me LT1-R with 18lbs option flywheel and billet support and will be doing a review of this clutch and dyno compared to my old clutch that couldn't take the power. also track 60 ft when weather gets better.

02-04-2014, 10:35 PM	#71
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,558 View My Garage	I'm asking as well. Sent a PM earlier. My clutch is about to go...screeching like crazy. I press in the clutch and the noise is gone. Release it and it's back....over and over. This is my daily driver and I need it badly... PM me a price please. Maybe I can pick it up to save time as I've got to do something to get me back on the road quickly. Any help would be greatly appreciated! Thanks!

02-04-2014, 11:00 PM	#72
DKT Drives: 2013 Camaro 1LE Join Date: Nov 2013 Location: NE/IA Posts: 222	Steve will get you hooked up!

02-06-2014, 10:48 AM	#76
Jason 98 TA Drives: Camaro Join Date: Apr 2009 Location: Texas Posts: 1,669	Good job guys

02-10-2014, 09:40 AM	#78
Steve@SNL/Monster Clutch Account Suspended Drives: 2014 SS Join Date: Jan 2011 Location: Haslet, TX Posts: 744	Bumping this for guys asking about them. We had two cars out at the track last night... not 5th gens but both had these clutches and cut some damn good 60's/times!!!