FS: Chrome TVS2300 - $4000 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jvoisel · 01-21-2014, 03:30 PM

Decided to sell the tvs2300 currently on my car. Blower will not be removed until sold, but should only take 2-3 days for me to remove & package everything once payment is made.

Includes..
Chrome TVS2300 blower - stock 1:1 10 rib rear and stock 3.8" 6 rib front pulleys
70mm tensioner pulley for better belt wrap
Magnuson Heat Exchanger & pump
GM intake gaskets with less than 200 miles.
**no fuel injectors** You will need fuel injectors, and possibly some vacuum/heater hose for installation. I will include all of the hoses I have but depending on how you route yours, you may need a few small pieces. Also, the IAT sensor was removed from the blower. I bought this blower from ADM and he does not use this to tune, but if you wanted to it could always be replaced or you could use a T-MAP sensor to read IAT's inside the blower.

Just two weeks ago I had the blower off of the car and every seal/gasket was replaced, rotors were checked for wear, intercooler checked for leaks, etc. Jackshaft bearings were replaced a few months ago. Everything looks great inside.

Price is $4000 firm on everything above. I also have everything else to make this a complete kit just as it came off my car. PM or text, 504-875-0812

Extra parts:
Overdrive COG pulley set, (1) used and (1) new belt
3.6" front 6 rib pulley with one dyno pull on it.
ZL1 Fuel Pump
ADM performance FPCM
Siemens Deka 62# injectors w/ adapters(these were just cleaned/tested by NEP)
ADM performance air intake
ADM performance boost gauge(mounds to bottom of gauge cluster)

With all of these parts, minus the 3.6" pulley(too much boost with OD cogs) and a set of headers I made 550/565 to the wheels on a mustang dyno. I will not be parting out any of the "extras" until the blower has sold.

jvoisel · 01-22-2014, 09:46 AM

Bump.

jvoisel · 01-24-2014, 03:05 PM

Up again.

I will not be parting this out.

jvoisel · 01-27-2014, 12:34 PM

jvoisel · 02-05-2014, 03:23 PM

Bump.

Behic2320 · 02-12-2014, 11:42 AM

If you end up splitting it up let me know how much you want for the rear OD cog set up

jvoisel · 02-12-2014, 06:17 PM

Quote:

Originally Posted by Behic2320

If you end up splitting it up let me know how much you want for the rear OD cog set up

Blower is on the car with the OD setup and won't be coming off unless someone makes me a serious offer.

Goodluck finding one bud. They pop up occasionally

jvoisel · 04-27-2014, 10:01 PM

Bump. Updated everything in the first post.

jvoisel · 04-29-2014, 07:26 AM

214Chevelle · 04-30-2014, 08:08 AM

Great price...GLWS!!

DaFisch · 04-30-2014, 09:59 AM

I wish I saw this earlier, I just bought a turbo!! GLWS

jvoisel · 04-30-2014, 10:00 AM

Quote:

Originally Posted by DaFisch

I wish I saw this earlier, I just bought a turbo!! GLWS

Trade ya

Thanks fellas, should sell quick at this price..

jvoisel · 05-01-2014, 02:39 PM

Bump.

ErikCanada · 05-01-2014, 04:35 PM

If I had a extra 4K I would so take it... As it is, MasterCard wants my money more lol.
I'm sure some lucky person will scoop this awesome deal

01-21-2014, 03:30 PM	#1
jvoisel Drives: 2010 2SS/RS M6 Join Date: Aug 2013 Location: New Orleans, La Posts: 436	FS: Chrome TVS2300 - $4000 Decided to sell the tvs2300 currently on my car. Blower will not be removed until sold, but should only take 2-3 days for me to remove & package everything once payment is made. Includes.. Chrome TVS2300 blower - stock 1:1 10 rib rear and stock 3.8" 6 rib front pulleys 70mm tensioner pulley for better belt wrap Magnuson Heat Exchanger & pump GM intake gaskets with less than 200 miles. no fuel injectors You will need fuel injectors, and possibly some vacuum/heater hose for installation. I will include all of the hoses I have but depending on how you route yours, you may need a few small pieces. Also, the IAT sensor was removed from the blower. I bought this blower from ADM and he does not use this to tune, but if you wanted to it could always be replaced or you could use a T-MAP sensor to read IAT's inside the blower. Just two weeks ago I had the blower off of the car and every seal/gasket was replaced, rotors were checked for wear, intercooler checked for leaks, etc. Jackshaft bearings were replaced a few months ago. Everything looks great inside. Price is $4000 firm on everything above. I also have everything else to make this a complete kit just as it came off my car. PM or text, 504-875-0812 Extra parts: Overdrive COG pulley set, (1) used and (1) new belt 3.6" front 6 rib pulley with one dyno pull on it. ZL1 Fuel Pump ADM performance FPCM Siemens Deka 62# injectors w/ adapters(these were just cleaned/tested by NEP) ADM performance air intake ADM performance boost gauge(mounds to bottom of gauge cluster) With all of these parts, minus the 3.6" pulley(too much boost with OD cogs) and a set of headers I made 550/565 to the wheels on a mustang dyno. I will not be parting out any of the "extras" until the blower has sold. __________________ 2010 2SS/RS Last edited by jvoisel; 05-01-2014 at 04:28 PM.

01-22-2014, 09:46 AM	#2
jvoisel Drives: 2010 2SS/RS M6 Join Date: Aug 2013 Location: New Orleans, La Posts: 436	Bump. __________________ 2010 2SS/RS

01-24-2014, 03:05 PM	#3
jvoisel Drives: 2010 2SS/RS M6 Join Date: Aug 2013 Location: New Orleans, La Posts: 436	Up again. I will not be parting this out. __________________ 2010 2SS/RS

01-27-2014, 12:34 PM	#4
jvoisel Drives: 2010 2SS/RS M6 Join Date: Aug 2013 Location: New Orleans, La Posts: 436	__________________ 2010 2SS/RS

02-05-2014, 03:23 PM	#5
jvoisel Drives: 2010 2SS/RS M6 Join Date: Aug 2013 Location: New Orleans, La Posts: 436	Bump. __________________ 2010 2SS/RS

02-12-2014, 11:42 AM	#6
Behic2320 SoCal HT5 COTW 4/21/13 Drives: 2011 SS/RS Blown & Cammed LS3 Join Date: Sep 2011 Location: Sandy Eggo Posts: 3,047	If you end up splitting it up let me know how much you want for the rear OD cog set up __________________

04-27-2014, 10:01 PM	#8
jvoisel Drives: 2010 2SS/RS M6 Join Date: Aug 2013 Location: New Orleans, La Posts: 436	Bump. Updated everything in the first post. __________________ 2010 2SS/RS

04-29-2014, 07:26 AM	#9
jvoisel Drives: 2010 2SS/RS M6 Join Date: Aug 2013 Location: New Orleans, La Posts: 436	__________________ 2010 2SS/RS

04-30-2014, 08:08 AM	#10
214Chevelle Drives: 72 Chevelle Join Date: Jan 2013 Location: Texas Posts: 116	Great price...GLWS!! __________________

04-30-2014, 09:59 AM	#11
DaFisch Master Amateur Mechanic Drives: Victory Red 2011 2SS/RS Join Date: Jan 2013 Location: South Barrington, IL Posts: 1,720	I wish I saw this earlier, I just bought a turbo!! GLWS

05-01-2014, 02:39 PM	#13
jvoisel Drives: 2010 2SS/RS M6 Join Date: Aug 2013 Location: New Orleans, La Posts: 436	Bump. __________________ 2010 2SS/RS

05-01-2014, 04:35 PM	#14
ErikCanada Drives: 2010 Camaro 2SS Join Date: Mar 2013 Location: Saskatoon, Canada Posts: 46 View My Garage	If I had a extra 4K I would so take it... As it is, MasterCard wants my money more lol. I'm sure some lucky person will scoop this awesome deal