08-31-2012, 11:34 AM | #1 |
Boosted Moderator
|
Pa Area Folks
I need some help.
I am looking to have an Ed Quay spoiler built for my car but they haven't had any volunteers in the area step up to offer their car as a template. This would involve taking your car to Ed Quay, Phone: (610) 323-9560 FAX: (610) 970-1126 E-mail: quaysupport@edquay.com* *Please include phone number Mailing and Street Address ed Quay Race Cars 948 Commerce Drive Pottstown, PA 19464 And letting them have access to it for an afternoon. They would remove the factory spoiler and use the trunk lid and sides of the car as a template. They assured me they have never scratched a car in this process... I need a spoiler like this prior to my runs at the Standing mile in seven weeks and would greatly appreciate anyone offering to step up and offer their car as a template. They will not drive the car. As was explained to me, they remove the factory lip spoiler and after taking measurements and whatever else they need, they will re-install the factory spoiler. Please pm me or post up in here if you are interested in volunteering.
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
08-31-2012, 11:41 AM | #2 |
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
I'm horrible at Geography, but how close is that to Tom Henry Racing? I'm sure he'd be up for helping you out.
|
08-31-2012, 07:51 PM | #3 |
|
NW of Philly, straight N. of West Chester.
This week would have been the easiest for me, I'll see what I can do next week. (no promises) Wonder if Gene from GMPartsHouse might be able...
__________________
|
08-31-2012, 08:03 PM | #4 |
Drives: 2010 SS/RS Victory Red Join Date: Jan 2011
Location: Philly, PA - Bill
Posts: 235
|
its not far from me, i can go if you need me to
__________________
|
09-01-2012, 01:29 AM | #5 |
Boosted Moderator
|
If anyone can go, please contact Bob at the listed phone number and see what they need and when...
He's the person I spoke with... I really appreciate it... Let me know if any one can do this... He said he could have me a spoiler pretty quickly if he gets a car to use...
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
09-09-2012, 12:22 PM | #6 |
Boosted Moderator
|
Anyone
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
09-09-2012, 12:32 PM | #7 |
|
Sorry, can't do it.
__________________
|
09-09-2012, 09:55 PM | #8 |
Boosted Moderator
|
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
09-10-2012, 12:42 PM | #9 |
Make your peace with God!
Drives: 2011 Camaro SS/RS M6 Convertible Join Date: Dec 2011
Location: Dirty Jersey
Posts: 1,595
|
I'm in NJ, if they wanna come and pick up my car, they can use it as long as they'd like.
__________________
ECS base supercharger (NOVI 1500SL), ECS AlKY control kit, 92mm TB, ARH 1 7/8" LT's non-catted, Borla 3" exhaust, ID850 injectors, Squash fuel system, ECS Big Blower Cam, MGW short throw shifter, DSS 1000hp axles, LGW differential cover, billet caps, Tech AFX heater hoses, Pedders differential bushings, Eaton TrueTrac differential, PRC dual valve springs, Katech C5R timing chain, ATI balancer, Meilings oil pump, Pfadt Trailing Arms, Pfadt Tie Rods, Pfadt Sway Bars, Pfadt End Links, DSS Aluminum Driveshaft
811RWHP/719RWTQ UNDER MAJOR OVERHAUL!! |
09-27-2012, 10:08 PM | #10 |
Drives: 2011 2SS IBM, 2008 Victory Vision Join Date: Apr 2010
Location: Abington, PA
Posts: 80
|
You still need help? I can get up there, if someone will maybe figure out a way to buy me lunch or throw some cash in for gas. It's only about an hour from me.
|
10-09-2012, 10:41 AM | #11 |
Drives: 2011 2SS IBM, 2008 Victory Vision Join Date: Apr 2010
Location: Abington, PA
Posts: 80
|
Spoke with Bob @ Ed Quay today. They said they have a local car that is available, but it has a spoiler on it, and they want someone with a 6 cyl that has no spoiler to come in. Sorry, I tried. Good luck.
|
10-09-2012, 12:40 PM | #12 |
Banned
|
shoot. I have a spoiler to. Why would that matter I wonder?
|
Thread Tools | |
|
|