Tsp LT header clamps not matching

[Moe A]

So i have finally got around installing the headers and when everything was in and i went under to clamp everything up I've noticed that the 4 large clamps are not matching, i don't know if this is how it's supposed to be but there are two different sets i have provided pictures to help you guys help me!





Also the LT headers are touching the plastic under tray, is this normal?

Thanks in advance!

[Moe A]

I've tried changing the image size but i'm still a noob, it might seem from the pictures that the clamps are similar but in fact they're not, in the first picture that is the tightest i can get the clamps to be which is not fully sealing the header, it has a nut on both sides of the clamp while the other does not.

would be great if someone posted a few pics of their off road connecting pipes

[RobZL1]

This might be useless to you, but since no one has responded about TSP headers yet... Here is a pic of my Stainless Works that I happened to already have on my phone. Maybe something in there will be helpful to you.

[ZMEnow]

Originally Posted by Moe A

So i have finally got around installing the headers and when everything was in and i went under to clamp everything up I've noticed that the 4 large clamps are not matching, i don't know if this is how it's supposed to be but there are two different sets i have provided pictures to help you guys help me!

Attachment 950729
Attachment 950730


Also the LT headers are touching the plastic under tray, is this normal?

Thanks in advance!

You have to cut out the plastic belly pan, can’t help on the clamps, you either have the right size or don’t.

[Moe A]

Thanks for replying!
I've contacted TSP and they told me i got a extra set that's not matching, so i only need one clamp on the header.
i don't know why i thought two clamps had to be on the headers.. i guess we learn from our mistakes as this is my first time doing anything like this.

[Moe A]

Originally Posted by ZMEnow

You have to cut out the plastic belly pan, can’t help on the clamps, you either have the right size or don’t.

oh so you guys have cut around your plastic belly pan? if so then thanks! i thought i had a bad fitment issue and I've done something terribly wrong