373 or 410 gears need help - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

g4dadon · 01-15-2011, 06:48 PM

I installed a set of 4.10s along with JRE's posi mod kit and it was dead silent until I installed a set of pro rear cradle and differential bushings which only gave a slight hint of noise which is not bad at all.

advfire · 01-15-2011, 09:30 PM

With a Full set of headers and Long pipes, and all the toppings I really couldn't tell you if my phone was ringing more less if my rear was making any noise.

Sorry

CynAgain · 01-22-2011, 09:54 AM

Quote:

Originally Posted by advfire

Would you happen to know if there was a production date or code on the cluster of 4.10 that were having failures, as mine just blew last night. same issue 4.10 richmond. i bought them about 4 months ago and just installed them this last week. went to the track and on my 6th run, pinion blew right at the line???

I saw your pics

sorry for your loss.

S-eatin-grin · 01-25-2011, 01:34 PM

Quote:

Originally Posted by advfire

With a Full set of headers and Long pipes, and all the toppings I really couldn't tell you if my phone was ringing more less if my rear was making any noise.

Sorry

Bahahahahaha...love it!

Apex Motorsports · 01-25-2011, 05:29 PM

Quote:

Originally Posted by advfire

With a Full set of headers and Long pipes, and all the toppings I really couldn't tell you if my phone was ringing more less if my rear was making any noise.

Sorry

Quote:

Originally Posted by S-eatin-grin

Bahahahahaha...love it!

Signature worthy for sure.

ProudLS · 01-25-2011, 07:03 PM

I am installing my gears next week, lets see how it goes..!!!!

CamaroCowboy · 01-26-2011, 07:54 AM

Thanks apex for your great info. Looks like I will be going with 4.10s when I stroke my motor to a 418

Apex Motorsports · 01-26-2011, 04:40 PM

Quote:

Originally Posted by CamaroCowboy

Thanks apex for your great info. Looks like I will be going with 4.10s when I stroke my motor to a 418

No problem. That should make for some fun!

TLS Camaro · 01-26-2011, 05:25 PM

Sorry to chime in late, but I had a set of 3:73 's installed late fall, I do notice a bit of gear noise...I think only in 4th and 5th....but I also had the PFADT solid subframe bushings installed.
So with the more solid feeling ride you also get some more noise travel through the drivetrain and into frame...

01-15-2011, 06:48 PM	#29
g4dadon Straight Performance Racn Drives: Anything over 600rwhp Join Date: May 2010 Location: Baton Rouge, Louisiana Posts: 211	I installed a set of 4.10s along with JRE's posi mod kit and it was dead silent until I installed a set of pro rear cradle and differential bushings which only gave a slight hint of noise which is not bad at all. Last edited by g4dadon; 01-15-2011 at 09:44 PM.

01-15-2011, 09:30 PM	#30
advfire Drives: 2010 SS Black Join Date: Jul 2009 Location: Parkland, Florida Posts: 171	With a Full set of headers and Long pipes, and all the toppings I really couldn't tell you if my phone was ringing more less if my rear was making any noise. Sorry __________________ 2SS- M6 - 849 RWHP, 757 RWTQ - YSI -Supercharger - Comp Cams Stage 3 Blower Cam -54-471-11 - (In-239/624 - Ex 255/624) MTI - CAI - Meth Injection Systems using 50/50 mix - Kooks 1 7/8" Headers with 3" catted X-Pipe - Kooks muflers to tips - LSR Short Throw Shifter - NGK TR6 Spark Plugs - 160 degree thermostat - LSR Sway Bars (Front & Rear) - BMR Subframe Connectors bolt-on - DSS - lingenfelter 9" w/ 4.10P - PFADT coilover front/back - BMR Spherical Toe rods / Trailing arms - Posi lock -

01-25-2011, 07:03 PM	#34
ProudLS Drives: Camaro SS Join Date: Dec 2009 Location: TX Posts: 193	I am installing my gears next week, lets see how it goes..!!!! __________________ 2010 Black/Black SS RS M6, ARH headers, Hi-flow cats w/x-pipe, Fastlane CAI, Livernois Camshaft 2C, SLP 160 Stat, SLP underdrive pulley, Hurst, Eibach lower spring, BMR lower control arms, BMR toe rods, Razzi body kit and Borla axle back. Tuned by me HPT.

01-26-2011, 07:54 AM	#35
CamaroCowboy Drives: 2013 Chevy Truck Join Date: Mar 2010 Location: Copperas Cove, Texas Posts: 1,782 View My Garage	Thanks apex for your great info. Looks like I will be going with 4.10s when I stroke my motor to a 418 __________________ Texas speed LT Headers and High Flow Cats, Magnaflow 3 inch cat-back Exhaust, SNL V2 Comp CAM, Texas Speed Underdrive Pully, G5CR CAI, Hurst Short Throw Shifter, JetFlo Mass Air Sensor, Custom Grill, Amber AAC Headlight and Fog Light Halo, Amber footwell Lighting, Amber under hood lighting, RK Sport Ram Air /Heat Extractor Hood and ADM Racing Scoop. 447.9 RWHP 428 TQ My car is exactly that, No one has to like it but me!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear End Gears 101	danhr	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	92	06-02-2021 04:17 AM
Looking to do gears cant decide 3:73 or 4:10	DadsCamaro	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	21	12-07-2010 07:00 PM
cam or 4:10 gears for more torque?	papabearcamaro	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	10-11-2010 07:23 PM
Looking for 373 gears!	Addiction	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	26	06-21-2010 06:40 PM
4:10 gears for sale	2SS nos	Transmission / Driveline	2	04-15-2010 10:59 AM

01-26-2011, 05:25 PM	#37
TLS Camaro Drives: 2010 Camaro SS Join Date: Sep 2010 Location: Canada Posts: 17 View My Garage	Sorry to chime in late, but I had a set of 3:73 's installed late fall, I do notice a bit of gear noise...I think only in 4th and 5th....but I also had the PFADT solid subframe bushings installed. So with the more solid feeling ride you also get some more noise travel through the drivetrain and into frame...