05-11-2010, 09:18 PM | #1 |
Drives: 2017 ZL1 A10 Join Date: Sep 2009
Location: Austin TX
Posts: 866
|
Rear strut removal??
What is the best way to remove the rear struts? Installing Eibach lowering kit.
Thanks in advance.
__________________
2017 ZL1
A10 Redhot with stripe |
05-11-2010, 09:28 PM | #2 |
Drives: 2LT/RS Join Date: Jul 2009
Location: San Antonio
Posts: 844
|
http://www.planetlsx.com/tech/How_To...010_Camaro/131
these are pfadt springs...but i used the same write-up for my eibachs... |
05-11-2010, 09:40 PM | #3 | |
Drives: 5th Gen Rental Join Date: Aug 2007
Location: New England
Posts: 1,901
|
Quote:
It is pretty easy. With the vehicle in the air: 1. Disoconne3ct the sway bar end link 2. Disconnect the outer control arm to knuckle bolt. 3. Disconnect the lower strut mount bolt 4. Disconnect the 4 15mm mounting bolts at the top At this point the strut comes right out! There are some issues with the upper sheet metal bucket and contact with the upper strut washer that can occur with some of the drop coils and coil overs I havwe done so many of them, I can have a rear strut out in under 5 minutes. mike dms |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need help with Strut noise | FFPM73 | Suspension / Brakes / Chassis | 19 | 06-07-2023 07:06 AM |
Pfadt Camaro Rear Toe Link Reinforcement Kit Install write-up | PfadtRacing | Suspension / Brakes / Chassis | 9 | 01-28-2014 07:15 PM |
Setting up an IRS/Drivetrain for Drag Racing | Kyle2k | Suspension / Brakes / Chassis | 44 | 06-05-2010 09:17 PM |
Im sure this has been asked before.. But forgive my innocence :) | gmag21 | Suspension / Brakes / Chassis | 23 | 02-21-2010 10:29 PM |
Steering response.... | CGM2SSRS | Wheels and Tires Talk Sponsored by The Tire Rack | 130 | 10-21-2009 05:04 PM |