03-14-2018, 06:36 AM | #1 |
Drives: 2011 camaro SS Join Date: Mar 2014
Location: Menifee Ca, United States
Posts: 259
|
QTP Cutout Rear Exhaust Piping
QTP Cutout Rear Exhaust Piping for sale. $165 shipped. This is for after the axle piping only. THIS DOES NOT INCLUDE THE CUTOUTS. This was my mock up system for the rear exhaust cutouts I hade made by SPINTECH. They are painted with black high temp paint and work perfectly.
|
03-14-2018, 07:58 PM | #2 |
S1N1STR
|
Those are sweet. Did you have it rigged up to the stock exhaust?
Sent from my iPhone using Tapatalk Pro |
03-15-2018, 04:29 AM | #3 |
GPI Sales Consultant
|
Having cutouts behind the rear axle myself, I gotta say this is the way to go. All the noise you could want, but none of the fumes and reverberation right under the cabin like you get with a lot of more "traditional" installs that are right under the center of the car. Nice little setup here - just buy yourself a set of valves and install.
__________________
GPI Max Package 2.0: Brodix BR7 heads/GPI porting, MAX3 cam, ST2116LSR, BSR Max Lift rockers, LS7 LSXR with 103mm TB, Vararam OTR, Mcleod RXT, G-Force/Strange 9" IRS setup with 4.63 gear. 551whp, 11.1@124mph.
Got a question about a GPI product? Feel free to shoot me a message! |
03-15-2018, 05:45 AM | #4 |
Drives: 2011 camaro SS Join Date: Mar 2014
Location: Menifee Ca, United States
Posts: 259
|
Set up for stock 2.5" SS exhaust. You should use them if you are running headers and want to open up the exhaust note. Mounted in the rear decreases cabin noise considerably, removes heat from under the seat and system wiring is not exposed to heat which negatively affects a remote control system and the actuators. When they were under the seat I had to wrap actuating system with heat protectors which are no longer required. Used with locking bolts these do not leak by at all behind the axle and I moved them because of all of the above reasons. I left a portion of stock exhaust so you would know where to cut out your exhaust and weld in this system. Any exhaust shop should be able to completely mount this system in under 2 hours including setting up wiring controls. already being pre-made eliminates the trial and error of installation.
|
03-15-2018, 09:49 AM | #5 |
I want these. Message me please.
|
|
03-20-2018, 03:06 PM | #6 |
Drives: 2011 camaro SS Join Date: Mar 2014
Location: Menifee Ca, United States
Posts: 259
|
Exhaust cutout piping
SOLD
|
|
|
Thread Tools | |
|
|