03-21-2018, 04:27 PM | #1 |
Ray
Drives: 2012 Camaro 1SS Join Date: Dec 2011
Location: Reno, NV
Posts: 21
|
3 Way Rocker Switches for Heated/Cooled Seats
Hi Guys,
I really did try to search for something similar but no luck. Forgive me if this is covered a dozen times and I just missed it. So I'm having my front seats re-upholstered with leather, and adding heating and cooling to the them (birthday present from wifey) It's a pretty simple process but I am not seeing a great place to install the 2x 3-way rocker switches that come with the kit. I was considering the center console, one on each side up close to the shifter, ahead of the e-brake handle. It's not completely flat there, and it may be an issue with fit and cosmetics. My question is, has anyone done something like this, and if so where did you locate the switches? Or heck, if you have a good suggestion regardless of having done it, I'm pretty open. Does the surface need to be flatter? I really would like the switches out in the open and not inside the center box. And the switches are way too big/wrong shape for the OEM seat heater location. Thanks again guys... Thank you, Ray |
03-28-2018, 10:18 AM | #2 |
Ray
Drives: 2012 Camaro 1SS Join Date: Dec 2011
Location: Reno, NV
Posts: 21
|
Hate to bump this, but has no one added after market switches for heated/cooled seats? I don't see a ton of really great spots for the switches and they won't fit in the OEM switch as it's a 3 way switch. Anyone? Bueller?
|
03-28-2018, 10:53 AM | #3 |
Drives: 2014 SIM 2SS Join Date: Sep 2015
Location: Charlotte, NC
Posts: 925
|
You may get suggestions if you post pictures of the switches.
|
03-28-2018, 01:56 PM | #4 |
Drives: 2014 1SS/1LE Join Date: Nov 2015
Location: Louisville, KY
Posts: 826
|
I did this for my NPP
Sent from my Pixel XL using Tapatalk
__________________
830 WHP 700 WTQ, Whipple 2.9 @ 13lbs Boost, Flex Fuel Tune by Blevins Tuning, LSA SBE, 3.5 GripTec, ATI LS3 Damper, AFR 260cc Mongoose, ARP Studs, Yella Terra Ultralites, Johnson 2110R, BTR PDS Stage 3, Melling 10355, Improved Racing Baffle, ID1050X, DSX Triple Fuel Pump, RotoFab CAI, NW 103mm TB, Stainless Works 1-7/8" LTH to 3" Speed Eng w/ X-pipe to NPP, Powermaster 9509 XS, Detroit Speed Motor Mounts, MGW, Monster LT1-S, ZL1 Calipers, DBA Rotors & Pads, Bilstein B6 Struts & Shocks, BMR 1.25" Drop Springs & Adj Rear Bar, Pegasus Solid Bushings, Z/28 Wheels, other misc parts.
|
03-29-2018, 10:36 AM | #5 |
Ray
Drives: 2012 Camaro 1SS Join Date: Dec 2011
Location: Reno, NV
Posts: 21
|
Fair enough.... how's this?
They may be a little bigger than the area larry posted but not a bad idea. I will look at that. But if anyone has other better ideas, I'm extremely open to suggestion. LOL Last edited by rharnes; 03-29-2018 at 11:32 AM. |
04-13-2018, 01:02 PM | #6 |
Drives: 2015 camaro 2lt Join Date: Dec 2016
Location: Northern West Virginia
Posts: 925
|
how much did this run?
__________________
Cosmetic mods: SS hood with painted vent, SS bumper, acs 1le front lip black, big worm gfx tinted all lights, solar wing v2, Camaro seat belt pads and oracle color shift halos and fog light halos and rear colorshift bow tie, carbon creations carbon fiber stingray z spoiler
Wheels: lexani r-3 bg finish 19x8.5 Performance: cold air inductions intake, mrt v1, jacfab ported intake manifold, intake manifold spacer, overkill tuned on E85. |
04-14-2018, 06:59 PM | #7 |
I run 2 catch cans...
|
Put your switches on the sides of the center console. The panels are easily removable to drill out an opening, and you can locate them wherever it is convenient and out of the way along the length.
__________________
Overkill tuned • Air Scoop • CAI • VMAX PTB • JacFab Laminator FX + Extendolator • SOLO Hi-Flo Cats + Cat-Back Exhaust
View my top 3 LFX performance mods and more: . |
|
|
|
|